u-boot/arch/arm/mach-uniphier/board_late_init.c
Masahiro Yamada 3f23111722 ARM: uniphier: add support for PH1-Pro4 Ace and Sanji boards
Initial commit for PH1-Pro4 Ace and Sanji boards.

Note:
There are two variants for the Ace board in terms of the amount of
DDR memory; 1GB or 2GB.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-14 17:07:46 +09:00

95 lines
2.5 KiB
C

/*
* Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <spl.h>
#include <libfdt.h>
#include <nand.h>
#include <linux/io.h>
#include <../drivers/mtd/nand/denali.h>
#include "boot-mode/boot-device.h"
static void nand_denali_wp_disable(void)
{
#ifdef CONFIG_NAND_DENALI
/*
* Since the boot rom enables the write protection for NAND boot mode,
* it must be disabled somewhere for "nand write", "nand erase", etc.
* The workaround is here to not disturb the Denali NAND controller
* driver just for a really SoC-specific thing.
*/
void __iomem *denali_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE;
writel(WRITE_PROTECT__FLAG, denali_reg + WRITE_PROTECT);
#endif
}
struct uniphier_fdt_file {
const char *compatible;
const char *file_name;
};
static const struct uniphier_fdt_file uniphier_fdt_files[] = {
{ "socionext,ph1-ld4-ref", "uniphier-ph1-ld4-ref.dtb", },
{ "socionext,ph1-ld6b-ref", "uniphier-ph1-ld6b-ref.dtb", },
{ "socionext,ph1-ld10-ref", "uniphier-ph1-ld10-ref.dtb", },
{ "socionext,ph1-pro4-ace", "uniphier-ph1-pro4-ace.dtb", },
{ "socionext,ph1-pro4-ref", "uniphier-ph1-pro4-ref.dtb", },
{ "socionext,ph1-pro4-sanji", "uniphier-ph1-pro4-sanji.dtb", },
{ "socionext,ph1-pro5-4kbox", "uniphier-ph1-pro5-4kbox.dtb", },
{ "socionext,ph1-sld3-ref", "uniphier-ph1-sld3-ref.dtb", },
{ "socionext,ph1-sld8-ref", "uniphier-ph1-sld8-ref.dtb", },
{ "socionext,proxstream2-gentil", "uniphier-proxstream2-gentil.dtb", },
{ "socionext,proxstream2-vodka", "uniphier-proxstream2-vodka.dtb", },
};
static void uniphier_set_fdt_file(void)
{
DECLARE_GLOBAL_DATA_PTR;
int i;
/* lookup DTB file name based on the compatible string */
for (i = 0; i < ARRAY_SIZE(uniphier_fdt_files); i++) {
if (!fdt_node_check_compatible(gd->fdt_blob, 0,
uniphier_fdt_files[i].compatible)) {
setenv("fdt_file", uniphier_fdt_files[i].file_name);
return;
}
}
}
int board_late_init(void)
{
puts("MODE: ");
switch (spl_boot_device_raw()) {
case BOOT_DEVICE_MMC1:
printf("eMMC Boot\n");
setenv("bootmode", "emmcboot");
break;
case BOOT_DEVICE_NAND:
printf("NAND Boot\n");
setenv("bootmode", "nandboot");
nand_denali_wp_disable();
break;
case BOOT_DEVICE_NOR:
printf("NOR Boot\n");
setenv("bootmode", "norboot");
break;
case BOOT_DEVICE_USB:
printf("USB Boot\n");
setenv("bootmode", "usbboot");
break;
default:
printf("Unsupported Boot Mode\n");
return -1;
}
uniphier_set_fdt_file();
return 0;
}