mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
4a8c3f693e
Some boards still use xstr(). Replace remaining occurrences of xstr() by commonly used __stringify(). Signed-off-by: Anatolij Gustschin <agust@denx.de>
70 lines
2.1 KiB
C
70 lines
2.1 KiB
C
/*
|
|
* (C) Copyright 2012
|
|
* DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* Valid values for CONFIG_SYS_TEXT_BASE are:
|
|
* 0xFC000000 boot low boot high (standard configuration)
|
|
* 0x00100000 boot from RAM (for testing only)
|
|
*/
|
|
#ifndef CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */
|
|
#endif
|
|
|
|
/* Board specific flash config */
|
|
#define CONFIG_SYS_FLASH_BASE 0xfc000000
|
|
#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */
|
|
/* max number of sectors on one chip */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512
|
|
|
|
/*
|
|
* Include common defines for all ifm boards
|
|
*/
|
|
#include "o2dnt-common.h"
|
|
|
|
/* Additional commands */
|
|
#define CONFIG_CMD_BSP
|
|
#define CONFIG_CMD_REGINFO
|
|
|
|
/*
|
|
* GPIO configuration:
|
|
* no CAN + no PCI
|
|
*/
|
|
#define CONFIG_SYS_GPS_PORT_CONFIG 0x0000A000
|
|
|
|
/* Other board specific configs */
|
|
#define CONFIG_SYS_BOOTCS_CFG 0x00057d01
|
|
#define CONFIG_SYS_RESET_ADDRESS 0xfc000000
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */
|
|
|
|
#define CONFIG_BOARD_NAME "o3dnt"
|
|
#define CONFIG_BOARD_BOOTCMD "run flash_self"
|
|
#define CONFIG_BOARD_MEM_LIMIT __stringify(62)
|
|
#define BOARD_POST_CRC32_END __stringify(0x01000000)
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
CONFIG_IFM_DEFAULT_ENV_SETTINGS \
|
|
CONFIG_IFM_DEFAULT_ENV_OLD \
|
|
CONFIG_IFM_DEFAULT_ENV_NEW \
|
|
"linbot=fc060000\0" \
|
|
"lintop=fc15ffff\0" \
|
|
"rambot=fc160000\0" \
|
|
"ramtop=fc55ffff\0" \
|
|
"jffbot=fc560000\0" \
|
|
"jfftop=fce5ffff\0" \
|
|
"ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
|
|
"ubotop=fc03ffff\0" \
|
|
"calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0" \
|
|
"calbot=fce60000\0" \
|
|
"caltop=fcffffff\0" \
|
|
"progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};" \
|
|
"cp.b ${fileaddr} ${calbot} ${filesize}\0" \
|
|
"kernel_addr=0xfc060000\0" \
|
|
"ramdisk_addr=0xfc160000\0" \
|
|
"master=mw f0000b00 0x0005A006;mw f0000b0c ${IOpin};" \
|
|
"mw f0000b04 ${IOpin};mw f0000b10 0x20\0"
|