mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 10:18:38 +00:00
b7e0750d88
Move arm twd timer driver from zynq to generic location. DM timer drivers are designed differently to original driver. Timer is counting up and not down. Information about clock rates are find out in timer_pre_probe() that's why there is no need to get any additional information from DT in the driver itself (only register offset). Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Link: https://lore.kernel.org/r/20220805061629.1207-1-stefan.herbrechtsmeier-oss@weidmueller.com Signed-off-by: Michal Simek <michal.simek@amd.com>
558 lines
13 KiB
Text
558 lines
13 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Xilinx Zynq 7000 DTSI
|
|
* Describes the hardware common to all Zynq 7000-based boards.
|
|
*
|
|
* Copyright (C) 2011 - 2015 Xilinx
|
|
*/
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "xlnx,zynq-7000";
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "arm,cortex-a9";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
clocks = <&clkc 3>;
|
|
clock-latency = <1000>;
|
|
cpu0-supply = <®ulator_vccpint>;
|
|
operating-points = <
|
|
/* kHz uV */
|
|
666667 1000000
|
|
333334 1000000
|
|
>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
compatible = "arm,cortex-a9";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
clocks = <&clkc 3>;
|
|
};
|
|
};
|
|
|
|
fpga_full: fpga-full {
|
|
compatible = "fpga-region";
|
|
fpga-mgr = <&devcfg>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
};
|
|
|
|
pmu@f8891000 {
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupts = <0 5 4>, <0 6 4>;
|
|
interrupt-parent = <&intc>;
|
|
reg = <0xf8891000 0x1000>,
|
|
<0xf8893000 0x1000>;
|
|
};
|
|
|
|
regulator_vccpint: fixedregulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VCCPINT";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
replicator {
|
|
compatible = "arm,coresight-static-replicator";
|
|
clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
|
|
clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
|
|
|
|
out-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* replicator output ports */
|
|
port@0 {
|
|
reg = <0>;
|
|
replicator_out_port0: endpoint {
|
|
remote-endpoint = <&tpiu_in_port>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
replicator_out_port1: endpoint {
|
|
remote-endpoint = <&etb_in_port>;
|
|
};
|
|
};
|
|
};
|
|
in-ports {
|
|
/* replicator input port */
|
|
port {
|
|
replicator_in_port0: endpoint {
|
|
remote-endpoint = <&funnel_out_port>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
amba: axi {
|
|
u-boot,dm-pre-reloc;
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&intc>;
|
|
ranges;
|
|
|
|
adc: adc@f8007100 {
|
|
compatible = "xlnx,zynq-xadc-1.00.a";
|
|
reg = <0xf8007100 0x20>;
|
|
interrupts = <0 7 4>;
|
|
interrupt-parent = <&intc>;
|
|
clocks = <&clkc 12>;
|
|
};
|
|
|
|
can0: can@e0008000 {
|
|
compatible = "xlnx,zynq-can-1.0";
|
|
status = "disabled";
|
|
clocks = <&clkc 19>, <&clkc 36>;
|
|
clock-names = "can_clk", "pclk";
|
|
reg = <0xe0008000 0x1000>;
|
|
interrupts = <0 28 4>;
|
|
interrupt-parent = <&intc>;
|
|
tx-fifo-depth = <0x40>;
|
|
rx-fifo-depth = <0x40>;
|
|
};
|
|
|
|
can1: can@e0009000 {
|
|
compatible = "xlnx,zynq-can-1.0";
|
|
status = "disabled";
|
|
clocks = <&clkc 20>, <&clkc 37>;
|
|
clock-names = "can_clk", "pclk";
|
|
reg = <0xe0009000 0x1000>;
|
|
interrupts = <0 51 4>;
|
|
interrupt-parent = <&intc>;
|
|
tx-fifo-depth = <0x40>;
|
|
rx-fifo-depth = <0x40>;
|
|
};
|
|
|
|
gpio0: gpio@e000a000 {
|
|
compatible = "xlnx,zynq-gpio-1.0";
|
|
#gpio-cells = <2>;
|
|
clocks = <&clkc 42>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 20 4>;
|
|
reg = <0xe000a000 0x1000>;
|
|
};
|
|
|
|
i2c0: i2c@e0004000 {
|
|
compatible = "cdns,i2c-r1p10";
|
|
status = "disabled";
|
|
clocks = <&clkc 38>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 25 4>;
|
|
reg = <0xe0004000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c1: i2c@e0005000 {
|
|
compatible = "cdns,i2c-r1p10";
|
|
status = "disabled";
|
|
clocks = <&clkc 39>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 48 4>;
|
|
reg = <0xe0005000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
intc: interrupt-controller@f8f01000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0xF8F01000 0x1000>,
|
|
<0xF8F00100 0x100>;
|
|
};
|
|
|
|
L2: cache-controller@f8f02000 {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0xF8F02000 0x1000>;
|
|
interrupts = <0 2 4>;
|
|
arm,data-latency = <3 2 2>;
|
|
arm,tag-latency = <2 2 2>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
|
|
mc: memory-controller@f8006000 {
|
|
compatible = "xlnx,zynq-ddrc-a05";
|
|
reg = <0xf8006000 0x1000>;
|
|
};
|
|
|
|
uart0: serial@e0000000 {
|
|
compatible = "xlnx,xuartps", "cdns,uart-r1p8";
|
|
status = "disabled";
|
|
clocks = <&clkc 23>, <&clkc 40>;
|
|
clock-names = "uart_clk", "pclk";
|
|
reg = <0xE0000000 0x1000>;
|
|
interrupts = <0 27 4>;
|
|
};
|
|
|
|
uart1: serial@e0001000 {
|
|
compatible = "xlnx,xuartps", "cdns,uart-r1p8";
|
|
status = "disabled";
|
|
clocks = <&clkc 24>, <&clkc 41>;
|
|
clock-names = "uart_clk", "pclk";
|
|
reg = <0xE0001000 0x1000>;
|
|
interrupts = <0 50 4>;
|
|
};
|
|
|
|
spi0: spi@e0006000 {
|
|
compatible = "xlnx,zynq-spi-r1p6";
|
|
reg = <0xe0006000 0x1000>;
|
|
status = "disabled";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 26 4>;
|
|
clocks = <&clkc 25>, <&clkc 34>;
|
|
clock-names = "ref_clk", "pclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
spi1: spi@e0007000 {
|
|
compatible = "xlnx,zynq-spi-r1p6";
|
|
reg = <0xe0007000 0x1000>;
|
|
status = "disabled";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 49 4>;
|
|
clocks = <&clkc 26>, <&clkc 35>;
|
|
clock-names = "ref_clk", "pclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
qspi: spi@e000d000 {
|
|
clock-names = "ref_clk", "pclk";
|
|
clocks = <&clkc 10>, <&clkc 43>;
|
|
compatible = "xlnx,zynq-qspi-1.0";
|
|
status = "disabled";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 19 4>;
|
|
reg = <0xe000d000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
gem0: ethernet@e000b000 {
|
|
compatible = "cdns,zynq-gem", "cdns,gem";
|
|
reg = <0xe000b000 0x1000>;
|
|
status = "disabled";
|
|
interrupts = <0 22 4>;
|
|
clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
|
|
clock-names = "pclk", "hclk", "tx_clk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
gem1: ethernet@e000c000 {
|
|
compatible = "cdns,zynq-gem", "cdns,gem";
|
|
reg = <0xe000c000 0x1000>;
|
|
status = "disabled";
|
|
interrupts = <0 45 4>;
|
|
clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
|
|
clock-names = "pclk", "hclk", "tx_clk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
smcc: memory-controller@e000e000 {
|
|
compatible = "arm,pl353-smc-r2p1", "arm,primecell";
|
|
reg = <0xe000e000 0x0001000>;
|
|
status = "disabled";
|
|
clock-names = "memclk", "apb_pclk";
|
|
clocks = <&clkc 11>, <&clkc 44>;
|
|
ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
|
|
0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
|
|
0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 18 4>;
|
|
|
|
nfc0: nand-controller@0,0 {
|
|
compatible = "arm,pl353-nand-r2p1";
|
|
reg = <0 0 0x1000000>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
nor0: flash@1,0 {
|
|
status = "disabled";
|
|
compatible = "cfi-flash";
|
|
reg = <1 0 0x2000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
|
|
sdhci0: mmc@e0100000 {
|
|
compatible = "arasan,sdhci-8.9a";
|
|
status = "disabled";
|
|
clock-names = "clk_xin", "clk_ahb";
|
|
clocks = <&clkc 21>, <&clkc 32>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 24 4>;
|
|
reg = <0xe0100000 0x1000>;
|
|
};
|
|
|
|
sdhci1: mmc@e0101000 {
|
|
compatible = "arasan,sdhci-8.9a";
|
|
status = "disabled";
|
|
clock-names = "clk_xin", "clk_ahb";
|
|
clocks = <&clkc 22>, <&clkc 33>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 47 4>;
|
|
reg = <0xe0101000 0x1000>;
|
|
};
|
|
|
|
slcr: slcr@f8000000 {
|
|
u-boot,dm-pre-reloc;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
|
|
reg = <0xF8000000 0x1000>;
|
|
ranges;
|
|
clkc: clkc@100 {
|
|
u-boot,dm-pre-reloc;
|
|
#clock-cells = <1>;
|
|
compatible = "xlnx,ps7-clkc";
|
|
fclk-enable = <0>;
|
|
clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
|
|
"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
|
|
"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
|
|
"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
|
|
"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
|
|
"dma", "usb0_aper", "usb1_aper", "gem0_aper",
|
|
"gem1_aper", "sdio0_aper", "sdio1_aper",
|
|
"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
|
|
"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
|
|
"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
|
|
"dbg_trc", "dbg_apb";
|
|
reg = <0x100 0x100>;
|
|
};
|
|
|
|
rstc: rstc@200 {
|
|
compatible = "xlnx,zynq-reset";
|
|
reg = <0x200 0x48>;
|
|
#reset-cells = <1>;
|
|
syscon = <&slcr>;
|
|
};
|
|
|
|
pinctrl0: pinctrl@700 {
|
|
compatible = "xlnx,pinctrl-zynq";
|
|
reg = <0x700 0x200>;
|
|
syscon = <&slcr>;
|
|
};
|
|
};
|
|
|
|
dmac_s: dmac@f8003000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0xf8003000 0x1000>;
|
|
interrupt-parent = <&intc>;
|
|
interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
|
|
"dma4", "dma5", "dma6", "dma7";
|
|
interrupts = <0 13 4>,
|
|
<0 14 4>, <0 15 4>,
|
|
<0 16 4>, <0 17 4>,
|
|
<0 40 4>, <0 41 4>,
|
|
<0 42 4>, <0 43 4>;
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <4>;
|
|
clocks = <&clkc 27>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
devcfg: devcfg@f8007000 {
|
|
compatible = "xlnx,zynq-devcfg-1.0";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 8 4>;
|
|
reg = <0xf8007000 0x100>;
|
|
clocks = <&clkc 12>, <&clkc 15>, <&clkc 16>, <&clkc 17>, <&clkc 18>;
|
|
clock-names = "ref_clk", "fclk0", "fclk1", "fclk2", "fclk3";
|
|
syscon = <&slcr>;
|
|
};
|
|
|
|
efuse: efuse@f800d000 {
|
|
compatible = "xlnx,zynq-efuse";
|
|
reg = <0xf800d000 0x20>;
|
|
};
|
|
|
|
global_timer: timer@f8f00200 {
|
|
compatible = "arm,cortex-a9-global-timer";
|
|
reg = <0xf8f00200 0x20>;
|
|
interrupts = <1 11 0x301>;
|
|
interrupt-parent = <&intc>;
|
|
clocks = <&clkc 4>;
|
|
};
|
|
|
|
ttc0: timer@f8001000 {
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
|
|
compatible = "cdns,ttc";
|
|
clocks = <&clkc 6>;
|
|
reg = <0xF8001000 0x1000>;
|
|
};
|
|
|
|
ttc1: timer@f8002000 {
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
|
|
compatible = "cdns,ttc";
|
|
clocks = <&clkc 6>;
|
|
reg = <0xF8002000 0x1000>;
|
|
};
|
|
|
|
scutimer: timer@f8f00600 {
|
|
u-boot,dm-pre-reloc;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <1 13 0x301>;
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0xf8f00600 0x20>;
|
|
clocks = <&clkc 4>;
|
|
};
|
|
|
|
usb0: usb@e0002000 {
|
|
compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
|
|
status = "disabled";
|
|
clocks = <&clkc 28>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 21 4>;
|
|
reg = <0xe0002000 0x1000>;
|
|
phy_type = "ulpi";
|
|
};
|
|
|
|
usb1: usb@e0003000 {
|
|
compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
|
|
status = "disabled";
|
|
clocks = <&clkc 29>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 44 4>;
|
|
reg = <0xe0003000 0x1000>;
|
|
phy_type = "ulpi";
|
|
};
|
|
|
|
watchdog0: watchdog@f8005000 {
|
|
clocks = <&clkc 45>;
|
|
compatible = "cdns,wdt-r1p2";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 9 1>;
|
|
reg = <0xf8005000 0x1000>;
|
|
timeout-sec = <10>;
|
|
};
|
|
|
|
etb@f8801000 {
|
|
compatible = "arm,coresight-etb10", "arm,primecell";
|
|
reg = <0xf8801000 0x1000>;
|
|
clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
|
|
clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
|
|
in-ports {
|
|
port {
|
|
etb_in_port: endpoint {
|
|
remote-endpoint = <&replicator_out_port1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu@f8803000 {
|
|
compatible = "arm,coresight-tpiu", "arm,primecell";
|
|
reg = <0xf8803000 0x1000>;
|
|
clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
|
|
clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
|
|
in-ports {
|
|
port {
|
|
tpiu_in_port: endpoint {
|
|
remote-endpoint = <&replicator_out_port0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@f8804000 {
|
|
compatible = "arm,coresight-static-funnel", "arm,primecell";
|
|
reg = <0xf8804000 0x1000>;
|
|
clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
|
|
clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
|
|
|
|
/* funnel output ports */
|
|
out-ports {
|
|
port {
|
|
funnel_out_port: endpoint {
|
|
remote-endpoint =
|
|
<&replicator_in_port0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* funnel input ports */
|
|
port@0 {
|
|
reg = <0>;
|
|
funnel0_in_port0: endpoint {
|
|
remote-endpoint = <&ptm0_out_port>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
funnel0_in_port1: endpoint {
|
|
remote-endpoint = <&ptm1_out_port>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
funnel0_in_port2: endpoint {
|
|
};
|
|
};
|
|
/* The other input ports are not connect to anything */
|
|
};
|
|
};
|
|
|
|
ptm@f889c000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0xf889c000 0x1000>;
|
|
clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
|
|
clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
|
|
cpu = <&cpu0>;
|
|
out-ports {
|
|
port {
|
|
ptm0_out_port: endpoint {
|
|
remote-endpoint = <&funnel0_in_port0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ptm@f889d000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0xf889d000 0x1000>;
|
|
clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
|
|
clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
|
|
cpu = <&cpu1>;
|
|
out-ports {
|
|
port {
|
|
ptm1_out_port: endpoint {
|
|
remote-endpoint = <&funnel0_in_port1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|