u-boot/board/st/stih410-b2260/board.c
Trevor Woerner 1001502545 CONFIG_SPL_SYS_[DI]CACHE_OFF: add
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-18 08:15:35 -04:00

78 lines
1.4 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
* Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics.
*/
#include <common.h>
#include <linux/usb/otg.h>
#include <dwc3-sti-glue.h>
#include <dwc3-uboot.h>
#include <usb.h>
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
gd->ram_size = PHYS_SDRAM_1_SIZE;
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return 0;
}
#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
#endif
int board_init(void)
{
return 0;
}
#ifdef CONFIG_USB_DWC3
static struct dwc3_device dwc3_device_data = {
.maximum_speed = USB_SPEED_HIGH,
.dr_mode = USB_DR_MODE_PERIPHERAL,
.index = 0,
};
int usb_gadget_handle_interrupts(int index)
{
dwc3_uboot_handle_interrupt(index);
return 0;
}
int board_usb_init(int index, enum usb_init_type init)
{
int node;
const void *blob = gd->fdt_blob;
/* find the snps,dwc3 node */
node = fdt_node_offset_by_compatible(blob, -1, "snps,dwc3");
dwc3_device_data.base = fdtdec_get_addr(blob, node, "reg");
return dwc3_uboot_init(&dwc3_device_data);
}
int board_usb_cleanup(int index, enum usb_init_type init)
{
dwc3_uboot_exit(index);
return 0;
}
int g_dnl_board_usb_cable_connected(void)
{
return 1;
}
#endif