u-boot/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2
Mario Six fe7d654d04 mpc83xx: Migrate CONFIG_SYS_{BR, OR}*_PRELIM to Kconfig
Migrate the BR/OR settings to Kconfig. These must be known at compile
time, so cannot be configured via DT.

Configuration of this crucial variable should still be somewhat
comfortable. Hence, make its fields configurable in Kconfig, and
assemble the final value from these.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21 07:52:33 +02:00

733 lines
13 KiB
Text

menuconfig ELBC_BR2_OR2
bool "ELBC BR2/OR2"
if ELBC_BR2_OR2
config BR2_OR2_NAME
string "Identifier"
config BR2_OR2_BASE
hex "Port base"
choice
prompt "Port size"
config BR2_PORTSIZE_8BIT
bool "8-bit"
config BR2_PORTSIZE_16BIT
depends on !BR2_MACHINE_FCM
bool "16-bit"
config BR2_PORTSIZE_32BIT
depends on !BR2_MACHINE_FCM
depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
bool "32-bit"
endchoice
if BR2_MACHINE_FCM
choice
prompt "Data Error Checking"
config BR2_ERRORCHECKING_DISABLED
bool "Disabled"
config BR2_ERRORCHECKING_ECC_CHECKING
bool "ECC checking / No ECC generation"
config BR2_ERRORCHECKING_BOTH
bool "ECC checking and generation"
endchoice
endif
config BR2_WRITE_PROTECT
bool "Write-protect"
config BR2_MACHINE_UPM
bool
choice
prompt "Machine select"
config BR2_MACHINE_GPCM
bool "GPCM"
config BR2_MACHINE_FCM
depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
bool "FCM"
config BR2_MACHINE_SDRAM
depends on ARCH_MPC8349 || ARCH_MPC8360
bool "SDRAM"
config BR2_MACHINE_UPMA
select BR2_MACHINE_UPM
bool "UPM (A)"
config BR2_MACHINE_UPMB
select BR2_MACHINE_UPM
bool "UPM (B)"
config BR2_MACHINE_UPMC
select BR2_MACHINE_UPM
bool "UPM (C)"
endchoice
if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360
choice
prompt "Atomic operations"
config BR2_ATOMIC_NONE
bool "No atomic operations"
config BR2_ATOMIC_RAWA
bool "Read-after-write-atomic"
config BR2_ATOMIC_WARA
bool "Write-after-read-atomic"
endchoice
endif
if BR2_MACHINE_GPCM || BR2_MACHINE_FCM || BR2_MACHINE_UPM || BR2_MACHINE_SDRAM
choice
prompt "Address mask"
config OR2_AM_32_KBYTES
depends on !BR2_MACHINE_SDRAM
bool "32 kb"
config OR2_AM_64_KBYTES
bool "64 kb"
config OR2_AM_128_KBYTES
bool "128 kb"
config OR2_AM_256_KBYTES
bool "256 kb"
config OR2_AM_512_KBYTES
bool "512 kb"
config OR2_AM_1_MBYTES
bool "1 mb"
config OR2_AM_2_MBYTES
bool "2 mb"
config OR2_AM_4_MBYTES
bool "4 mb"
config OR2_AM_8_MBYTES
bool "8 mb"
config OR2_AM_16_MBYTES
bool "16 mb"
config OR2_AM_32_MBYTES
bool "32 mb"
config OR2_AM_64_MBYTES
bool "64 mb"
# XXX: Some boards define 128MB AM with GPCM, even though it should not be
# possible according to the manuals
config OR2_AM_128_MBYTES
bool "128 mb"
# XXX: Some boards define 256MB AM with GPCM, even though it should not be
# possible according to the manuals
config OR2_AM_256_MBYTES
bool "256 mb"
config OR2_AM_512_MBYTES
depends on BR2_MACHINE_FCM
bool "512 mb"
# XXX: Some boards define 1GB AM with GPCM, even though it should not be
# possible according to the manuals
config OR2_AM_1_GBYTES
bool "1 gb"
config OR2_AM_2_GBYTES
depends on BR2_MACHINE_FCM
bool "2 gb"
config OR2_AM_4_GBYTES
depends on BR2_MACHINE_FCM
bool "4 gb"
endchoice
config OR2_XAM_SET
bool "Set unused bytes after address mask"
choice
prompt "Buffer control disable"
config OR2_BCTLD_ASSERTED
bool "Asserted"
config OR2_BCTLD_NOT_ASSERTED
bool "Not asserted"
endchoice
endif
if BR2_MACHINE_GPCM || BR2_MACHINE_FCM
choice
prompt "Cycle length in bus clocks"
config OR2_SCY_0
bool "No wait states"
config OR2_SCY_1
bool "1 wait state"
config OR2_SCY_2
bool "2 wait states"
config OR2_SCY_3
bool "3 wait states"
config OR2_SCY_4
bool "4 wait states"
config OR2_SCY_5
bool "5 wait states"
config OR2_SCY_6
bool "6 wait states"
config OR2_SCY_7
bool "7 wait states"
config OR2_SCY_8
depends on BR2_MACHINE_GPCM
bool "8 wait states"
config OR2_SCY_9
depends on BR2_MACHINE_GPCM
bool "9 wait states"
config OR2_SCY_10
depends on BR2_MACHINE_GPCM
bool "10 wait states"
config OR2_SCY_11
depends on BR2_MACHINE_GPCM
bool "11 wait states"
config OR2_SCY_12
depends on BR2_MACHINE_GPCM
bool "12 wait states"
config OR2_SCY_13
depends on BR2_MACHINE_GPCM
bool "13 wait states"
config OR2_SCY_14
depends on BR2_MACHINE_GPCM
bool "14 wait states"
config OR2_SCY_15
depends on BR2_MACHINE_GPCM
bool "15 wait states"
endchoice
endif # BR2_MACHINE_GPCM || BR2_MACHINE_FCM
if BR2_MACHINE_GPCM
choice
prompt "Chip select negotiation time"
config OR2_CSNT_NORMAL
bool "Normal"
config OR2_CSNT_EARLIER
bool "Earlier"
endchoice
choice
prompt "Address to chip-select setup"
config OR2_ACS_SAME_TIME
bool "At the same time"
config OR2_ACS_HALF_CYCLE_EARLIER
bool "Half of a bus clock cycle earlier"
config OR2_ACS_QUARTER_CYCLE_EARLIER
bool "Half/Quarter of a bus clock cycle earlier"
endchoice
choice
prompt "Extra address to check-select setup"
config OR2_XACS_NORMAL
bool "Normal"
config OR2_XACS_EXTENDED
bool "Extended"
endchoice
choice
prompt "External address termination"
config OR2_SETA_INTERNAL
bool "Access is terminated internally"
config OR2_SETA_EXTERNAL
bool "Access is terminated externally"
endchoice
endif # BR2_MACHINE_GPCM
if BR2_MACHINE_FCM
choice
prompt "NAND Flash EEPROM page size"
config OR2_PGS_SMALL
bool "Small page device"
config OR2_PGS_LARGE
bool "Large page device"
endchoice
choice
prompt "Chip select to command time"
config OR2_CSCT_1_CYCLE
depends on OR2_TRLX_NORMAL
bool "1 cycle"
config OR2_CSCT_2_CYCLE
depends on OR2_TRLX_RELAXED
bool "2 cycles"
config OR2_CSCT_4_CYCLE
depends on OR2_TRLX_NORMAL
bool "4 cycles"
config OR2_CSCT_8_CYCLE
depends on OR2_TRLX_RELAXED
bool "8 cycles"
endchoice
choice
prompt "Command setup time"
config OR2_CST_COINCIDENT
depends on OR2_TRLX_NORMAL
bool "Coincident with any command"
config OR2_CST_QUARTER_CLOCK
depends on OR2_TRLX_NORMAL
bool "0.25 clocks after"
config OR2_CST_HALF_CLOCK
depends on OR2_TRLX_RELAXED
bool "0.5 clocks after"
config OR2_CST_ONE_CLOCK
depends on OR2_TRLX_RELAXED
bool "1 clock after"
endchoice
choice
prompt "Command hold time"
config OR2_CHT_HALF_CLOCK
depends on OR2_TRLX_NORMAL
bool "0.5 clocks before"
config OR2_CHT_ONE_CLOCK
depends on OR2_TRLX_NORMAL
bool "1 clock before"
config OR2_CHT_ONE_HALF_CLOCK
depends on OR2_TRLX_RELAXED
bool "1.5 clocks before"
config OR2_CHT_TWO_CLOCK
depends on OR2_TRLX_RELAXED
bool "2 clocks before"
endchoice
choice
prompt "Reset setup time"
config OR2_RST_THREE_QUARTER_CLOCK
depends on OR2_TRLX_NORMAL
bool "0.75 clocks prior"
config OR2_RST_ONE_HALF_CLOCK
depends on OR2_TRLX_RELAXED
bool "0.5 clocks prior"
config OR2_RST_ONE_CLOCK
bool "1 clock prior"
endchoice
endif # BR2_MACHINE_FCM
if BR2_MACHINE_UPM
choice
prompt "Burst inhibit"
config OR2_BI_BURSTSUPPORT
bool "Support burst access"
config OR2_BI_BURSTINHIBIT
bool "Inhibit burst access"
endchoice
endif # BR2_MACHINE_UPM
if BR2_MACHINE_SDRAM
choice
prompt "Number of column address lines"
config OR2_COLS_7
bool "7"
config OR2_COLS_8
bool "8"
config OR2_COLS_9
bool "9"
config OR2_COLS_10
bool "10"
config OR2_COLS_11
bool "11"
config OR2_COLS_12
bool "12"
config OR2_COLS_13
bool "13"
config OR2_COLS_14
bool "14"
endchoice
choice
prompt "Number of rows address lines"
config OR2_ROWS_9
bool "9"
config OR2_ROWS_10
bool "10"
config OR2_ROWS_11
bool "11"
config OR2_ROWS_12
bool "12"
config OR2_ROWS_13
bool "13"
config OR2_ROWS_14
bool "14"
config OR2_ROWS_15
bool "15"
endchoice
choice
prompt "Page mode select"
config OR2_PMSEL_BTB
bool "Back-to-back"
config OR2_PMSEL_KEPT_OPEN
bool "Page kept open until page miss or refresh"
endchoice
endif # BR2_MACHINE_SDRAM
choice
prompt "Relaxed timing"
config OR2_TRLX_NORMAL
bool "Normal"
config OR2_TRLX_RELAXED
bool "Relaxed"
endchoice
choice
prompt "Extended hold time"
config OR2_EHTR_NORMAL
depends on OR2_TRLX_NORMAL
bool "Normal"
config OR2_EHTR_1_CYCLE
depends on OR2_TRLX_NORMAL
bool "1 idle clock cycle inserted"
config OR2_EHTR_4_CYCLE
depends on OR2_TRLX_RELAXED
bool "4 idle clock cycles inserted"
config OR2_EHTR_8_CYCLE
depends on OR2_TRLX_RELAXED
bool "8 idle clock cycles inserted"
endchoice
if !ARCH_MPC8308
choice
prompt "External address latch delay"
config OR2_EAD_NONE
bool "None"
config OR2_EAD_EXTRA
bool "Extra"
endchoice
endif # !ARCH_MPC8308
endif # ELBC_BR2_OR2
config BR2_PORTSIZE
hex
default 0x800 if BR2_PORTSIZE_8BIT
default 0x1000 if BR2_PORTSIZE_16BIT
default 0x1800 if BR2_PORTSIZE_32BIT
config BR2_ERRORCHECKING
hex
default 0x0 if !BR2_MACHINE_FCM
default 0x0 if BR2_ERRORCHECKING_DISABLED
default 0x200 if BR2_ERRORCHECKING_ECC_CHECKING
default 0x400 if BR2_ERRORCHECKING_BOTH
config BR2_WRITE_PROTECT_BIT
hex
default 0x0 if !BR2_WRITE_PROTECT
default 0x100 if BR2_WRITE_PROTECT
config BR2_MACHINE
hex
default 0x0 if BR2_MACHINE_GPCM
default 0x20 if BR2_MACHINE_FCM
default 0x60 if BR2_MACHINE_SDRAM
default 0x80 if BR2_MACHINE_UPMA
default 0xa0 if BR2_MACHINE_UPMB
default 0xc0 if BR2_MACHINE_UPMC
config BR2_ATOMIC
hex
default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360
default 0x0 if BR2_ATOMIC_NONE
default 0x4 if BR2_ATOMIC_RAWA
default 0x8 if BR2_ATOMIC_WARA
config BR2_VALID_BIT
hex
default 0x0 if !ELBC_BR2_OR2
default 0x1 if ELBC_BR2_OR2
config OR2_AM
hex
default 0xffff8000 if OR2_AM_32_KBYTES && !BR2_MACHINE_SDRAM
default 0xffff0000 if OR2_AM_64_KBYTES
default 0xfffe0000 if OR2_AM_128_KBYTES
default 0xfffc0000 if OR2_AM_256_KBYTES
default 0xfff80000 if OR2_AM_512_KBYTES
default 0xfff00000 if OR2_AM_1_MBYTES
default 0xffe00000 if OR2_AM_2_MBYTES
default 0xffc00000 if OR2_AM_4_MBYTES
default 0xff800000 if OR2_AM_8_MBYTES
default 0xff000000 if OR2_AM_16_MBYTES
default 0xfe000000 if OR2_AM_32_MBYTES
default 0xfc000000 if OR2_AM_64_MBYTES
default 0xf8000000 if OR2_AM_128_MBYTES
default 0xf0000000 if OR2_AM_256_MBYTES
default 0xe0000000 if OR2_AM_512_MBYTES
default 0xc0000000 if OR2_AM_1_GBYTES
default 0x80000000 if OR2_AM_2_GBYTES
default 0x00000000 if OR2_AM_4_GBYTES
config OR2_XAM
hex
default 0x0 if !OR2_XAM_SET
default 0x6000 if OR2_XAM_SET
config OR2_BCTLD
hex
default 0x0 if OR2_BCTLD_ASSERTED
default 0x1000 if OR2_BCTLD_NOT_ASSERTED
config OR2_BI
hex
default 0x0 if !BR2_MACHINE_UPM
default 0x0 if OR2_BI_BURSTSUPPORT
default 0x100 if OR2_BI_BURSTINHIBIT
config OR2_COLS
hex
default 0x0 if !BR2_MACHINE_SDRAM
default 0x0 if OR2_COLS_7
default 0x400 if OR2_COLS_8
default 0x800 if OR2_COLS_9
default 0xc00 if OR2_COLS_10
default 0x1000 if OR2_COLS_11
default 0x1400 if OR2_COLS_12
default 0x1800 if OR2_COLS_13
default 0x1c00 if OR2_COLS_14
config OR2_ROWS
hex
default 0x0 if !BR2_MACHINE_SDRAM
default 0x0 if OR2_ROWS_9
default 0x40 if OR2_ROWS_10
default 0x80 if OR2_ROWS_11
default 0xc0 if OR2_ROWS_12
default 0x100 if OR2_ROWS_13
default 0x140 if OR2_ROWS_14
default 0x180 if OR2_ROWS_15
config OR2_PMSEL
hex
default 0x0 if !BR2_MACHINE_SDRAM
default 0x0 if OR2_PMSEL_BTB
default 0x20 if OR2_PMSEL_KEPT_OPEN
config OR2_SCY
hex
default 0x0 if !BR2_MACHINE_GPCM && !BR2_MACHINE_FCM
default 0x0 if OR2_SCY_0
default 0x10 if OR2_SCY_1
default 0x20 if OR2_SCY_2
default 0x30 if OR2_SCY_3
default 0x40 if OR2_SCY_4
default 0x50 if OR2_SCY_5
default 0x60 if OR2_SCY_6
default 0x70 if OR2_SCY_7
default 0x80 if OR2_SCY_8
default 0x90 if OR2_SCY_9
default 0xa0 if OR2_SCY_10
default 0xb0 if OR2_SCY_11
default 0xc0 if OR2_SCY_12
default 0xd0 if OR2_SCY_13
default 0xe0 if OR2_SCY_14
default 0xf0 if OR2_SCY_15
config OR2_PGS
hex
default 0x0 if !BR2_MACHINE_FCM
default 0x0 if OR2_PGS_SMALL
default 0x400 if OR2_PGS_LARGE
config OR2_CSCT
hex
default 0x0 if !BR2_MACHINE_FCM
default 0x0 if OR2_CSCT_1_CYCLE
default 0x0 if OR2_CSCT_2_CYCLE
default 0x200 if OR2_CSCT_4_CYCLE
default 0x200 if OR2_CSCT_8_CYCLE
config OR2_CST
hex
default 0x0 if !BR2_MACHINE_FCM
default 0x0 if OR2_CST_COINCIDENT
default 0x100 if OR2_CST_QUARTER_CLOCK
default 0x0 if OR2_CST_HALF_CLOCK
default 0x100 if OR2_CST_ONE_CLOCK
config OR2_CHT
hex
default 0x0 if !BR2_MACHINE_FCM
default 0x0 if OR2_CHT_HALF_CLOCK
default 0x80 if OR2_CHT_ONE_CLOCK
default 0x0 if OR2_CHT_ONE_HALF_CLOCK
default 0x80 if OR2_CHT_TWO_CLOCK
config OR2_RST
hex
default 0x0 if !BR2_MACHINE_FCM
default 0x0 if OR2_RST_THREE_QUARTER_CLOCK
default 0x8 if OR2_RST_ONE_CLOCK
default 0x0 if OR2_RST_ONE_HALF_CLOCK
config OR2_CSNT
hex
default 0x0 if !BR2_MACHINE_GPCM
default 0x0 if OR2_CSNT_NORMAL
default 0x800 if OR2_CSNT_EARLIER
config OR2_ACS
hex
default 0x0 if !BR2_MACHINE_GPCM
default 0x0 if OR2_ACS_SAME_TIME
default 0x400 if OR2_ACS_QUARTER_CYCLE_EARLIER
default 0x600 if OR2_ACS_HALF_CYCLE_EARLIER
config OR2_XACS
hex
default 0x0 if !BR2_MACHINE_GPCM
default 0x0 if OR2_XACS_NORMAL
default 0x100 if OR2_XACS_EXTENDED
config OR2_SETA
hex
default 0x0 if !BR2_MACHINE_GPCM
default 0x0 if OR2_SETA_INTERNAL
default 0x8 if OR2_SETA_EXTERNAL
config OR2_TRLX
hex
default 0x0 if OR2_TRLX_NORMAL
default 0x4 if OR2_TRLX_RELAXED
config OR2_EHTR
hex
default 0x0 if OR2_EHTR_NORMAL
default 0x2 if OR2_EHTR_1_CYCLE
default 0x0 if OR2_EHTR_4_CYCLE
default 0x2 if OR2_EHTR_8_CYCLE
config OR2_EAD
hex
default 0x0 if ARCH_MPC8308
default 0x0 if OR2_EAD_NONE
default 0x1 if OR2_EAD_EXTRA