mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 14:10:43 +00:00
73c16692bc
When issuing 'i2c probe', the driver was crashing, because at probe
there is a request with zero length buffer to write to i2c bus.
The xfer_msg function assumes the buffer is always there, and never
checks for the buffer length.
=> i2c dev 0
Setting bus to 0
=> i2c probe
Valid chip addresses:
data abort
pc : [<7ffa97dc>] lr : [<7ffa96f8>]
reloc pc : [<66f277dc>] lr : [<66f276f8>]
sp : 7fb7c110 ip : 7ff87a28 fp : 7ff99938
r10: 00000002 r9 : 7fb7dec0 r8 : 00000000
r7 : e181c600 r6 : 7fb88c20 r5 : 00000000 r4 : 7fb7c128
r3 : 00000000 r2 : 00000001 r1 : 00000000 r0 : 00000009
Flags: nZCv IRQs off FIQs off Mode SVC_32
Code: eb0092f4 e1a00005 e8bd81f0 e594300c (e5d33000)
Resetting CPU ...
Fixes: 8800e0fa20
("i2c: atmel: add i2c driver")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
329 lines
6.9 KiB
C
329 lines
6.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Atmel I2C driver.
|
|
*
|
|
* (C) Copyright 2016 Songjun Wu <songjun.wu@atmel.com>
|
|
*/
|
|
|
|
#include <malloc.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <i2c.h>
|
|
#include <linux/bitops.h>
|
|
#include <mach/clk.h>
|
|
|
|
#include "at91_i2c.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define I2C_TIMEOUT_MS 100
|
|
|
|
static int at91_wait_for_xfer(struct at91_i2c_bus *bus, u32 status)
|
|
{
|
|
struct at91_i2c_regs *reg = bus->regs;
|
|
ulong start_time = get_timer(0);
|
|
u32 sr;
|
|
|
|
bus->status = 0;
|
|
|
|
do {
|
|
sr = readl(®->sr);
|
|
bus->status |= sr;
|
|
|
|
if (sr & TWI_SR_NACK)
|
|
return -EREMOTEIO;
|
|
else if (sr & status)
|
|
return 0;
|
|
} while (get_timer(start_time) < I2C_TIMEOUT_MS);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int at91_i2c_xfer_msg(struct at91_i2c_bus *bus, struct i2c_msg *msg)
|
|
{
|
|
struct at91_i2c_regs *reg = bus->regs;
|
|
bool is_read = msg->flags & I2C_M_RD;
|
|
u32 i;
|
|
int ret = 0;
|
|
|
|
/* if there is no message to send/receive, just exit quietly */
|
|
if (msg->len == 0)
|
|
return ret;
|
|
|
|
readl(®->sr);
|
|
if (is_read) {
|
|
writel(TWI_CR_START, ®->cr);
|
|
|
|
for (i = 0; !ret && i < (msg->len - 1); i++) {
|
|
ret = at91_wait_for_xfer(bus, TWI_SR_RXRDY);
|
|
msg->buf[i] = readl(®->rhr);
|
|
}
|
|
|
|
if (ret)
|
|
goto error;
|
|
|
|
writel(TWI_CR_STOP, ®->cr);
|
|
|
|
ret = at91_wait_for_xfer(bus, TWI_SR_RXRDY);
|
|
if (ret)
|
|
goto error;
|
|
|
|
msg->buf[i] = readl(®->rhr);
|
|
|
|
} else {
|
|
writel(msg->buf[0], ®->thr);
|
|
ret = at91_wait_for_xfer(bus, TWI_SR_TXRDY);
|
|
|
|
for (i = 1; !ret && (i < msg->len); i++) {
|
|
writel(msg->buf[i], ®->thr);
|
|
ret = at91_wait_for_xfer(bus, TWI_SR_TXRDY);
|
|
}
|
|
|
|
if (ret)
|
|
goto error;
|
|
|
|
writel(TWI_CR_STOP, ®->cr);
|
|
}
|
|
|
|
if (!ret)
|
|
ret = at91_wait_for_xfer(bus, TWI_SR_TXCOMP);
|
|
|
|
if (ret)
|
|
goto error;
|
|
|
|
if (bus->status & (TWI_SR_OVRE | TWI_SR_UNRE | TWI_SR_LOCK)) {
|
|
ret = -EIO;
|
|
goto error;
|
|
}
|
|
|
|
return 0;
|
|
|
|
error:
|
|
if (bus->status & TWI_SR_LOCK)
|
|
writel(TWI_CR_LOCKCLR, ®->cr);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int at91_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs)
|
|
{
|
|
struct at91_i2c_bus *bus = dev_get_priv(dev);
|
|
struct at91_i2c_regs *reg = bus->regs;
|
|
struct i2c_msg *m_start = msg;
|
|
bool is_read;
|
|
u32 int_addr_flag = 0;
|
|
int ret = 0;
|
|
|
|
if (nmsgs == 2) {
|
|
int internal_address = 0;
|
|
int i;
|
|
|
|
/* 1st msg is put into the internal address, start with 2nd */
|
|
m_start = &msg[1];
|
|
|
|
/* the max length of internal address is 3 bytes */
|
|
if (msg->len > 3)
|
|
return -EFAULT;
|
|
|
|
for (i = 0; i < msg->len; ++i) {
|
|
const unsigned addr = msg->buf[msg->len - 1 - i];
|
|
|
|
internal_address |= addr << (8 * i);
|
|
int_addr_flag += TWI_MMR_IADRSZ_1;
|
|
}
|
|
|
|
writel(internal_address, ®->iadr);
|
|
}
|
|
|
|
is_read = m_start->flags & I2C_M_RD;
|
|
|
|
writel((m_start->addr << 16) | int_addr_flag |
|
|
(is_read ? TWI_MMR_MREAD : 0), ®->mmr);
|
|
|
|
ret = at91_i2c_xfer_msg(bus, m_start);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Calculate symmetric clock as stated in datasheet:
|
|
* twi_clk = F_MAIN / (2 * (cdiv * (1 << ckdiv) + offset))
|
|
*/
|
|
static void at91_calc_i2c_clock(struct udevice *dev, int i2c_clk)
|
|
{
|
|
struct at91_i2c_bus *bus = dev_get_priv(dev);
|
|
const struct at91_i2c_pdata *pdata = bus->pdata;
|
|
int offset = pdata->clk_offset;
|
|
int max_ckdiv = pdata->clk_max_div;
|
|
int ckdiv, cdiv, div;
|
|
unsigned long src_rate;
|
|
|
|
src_rate = bus->bus_clk_rate;
|
|
|
|
div = max(0, (int)DIV_ROUND_UP(src_rate, 2 * i2c_clk) - offset);
|
|
ckdiv = fls(div >> 8);
|
|
cdiv = div >> ckdiv;
|
|
|
|
if (ckdiv > max_ckdiv) {
|
|
ckdiv = max_ckdiv;
|
|
cdiv = 255;
|
|
}
|
|
|
|
bus->speed = DIV_ROUND_UP(src_rate,
|
|
(cdiv * (1 << ckdiv) + offset) * 2);
|
|
|
|
bus->cwgr_val = (ckdiv << 16) | (cdiv << 8) | cdiv;
|
|
}
|
|
|
|
static int at91_i2c_enable_clk(struct udevice *dev)
|
|
{
|
|
struct at91_i2c_bus *bus = dev_get_priv(dev);
|
|
struct clk clk;
|
|
ulong clk_rate;
|
|
int ret;
|
|
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
ret = clk_enable(&clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
clk_rate = clk_get_rate(&clk);
|
|
if (!clk_rate)
|
|
return -EINVAL;
|
|
|
|
bus->bus_clk_rate = clk_rate;
|
|
|
|
clk_free(&clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
|
|
{
|
|
struct at91_i2c_bus *bus = dev_get_priv(dev);
|
|
|
|
at91_calc_i2c_clock(dev, speed);
|
|
|
|
writel(bus->cwgr_val, &bus->regs->cwgr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int at91_i2c_get_bus_speed(struct udevice *dev)
|
|
{
|
|
struct at91_i2c_bus *bus = dev_get_priv(dev);
|
|
|
|
return bus->speed;
|
|
}
|
|
|
|
static int at91_i2c_of_to_plat(struct udevice *dev)
|
|
{
|
|
const void *blob = gd->fdt_blob;
|
|
struct at91_i2c_bus *bus = dev_get_priv(dev);
|
|
int node = dev_of_offset(dev);
|
|
|
|
bus->regs = dev_read_addr_ptr(dev);
|
|
bus->pdata = (struct at91_i2c_pdata *)dev_get_driver_data(dev);
|
|
bus->clock_frequency = fdtdec_get_int(blob, node,
|
|
"clock-frequency", 100000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_i2c_ops at91_i2c_ops = {
|
|
.xfer = at91_i2c_xfer,
|
|
.set_bus_speed = at91_i2c_set_bus_speed,
|
|
.get_bus_speed = at91_i2c_get_bus_speed,
|
|
};
|
|
|
|
static int at91_i2c_probe(struct udevice *dev)
|
|
{
|
|
struct at91_i2c_bus *bus = dev_get_priv(dev);
|
|
struct at91_i2c_regs *reg = bus->regs;
|
|
int ret;
|
|
|
|
ret = at91_i2c_enable_clk(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
writel(TWI_CR_SWRST, ®->cr);
|
|
|
|
at91_calc_i2c_clock(dev, bus->clock_frequency);
|
|
|
|
writel(bus->cwgr_val, ®->cwgr);
|
|
writel(TWI_CR_MSEN, ®->cr);
|
|
writel(TWI_CR_SVDIS, ®->cr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct at91_i2c_pdata at91rm9200_config = {
|
|
.clk_max_div = 5,
|
|
.clk_offset = 3,
|
|
};
|
|
|
|
static const struct at91_i2c_pdata at91sam9261_config = {
|
|
.clk_max_div = 5,
|
|
.clk_offset = 4,
|
|
};
|
|
|
|
static const struct at91_i2c_pdata at91sam9260_config = {
|
|
.clk_max_div = 7,
|
|
.clk_offset = 4,
|
|
};
|
|
|
|
static const struct at91_i2c_pdata at91sam9g20_config = {
|
|
.clk_max_div = 7,
|
|
.clk_offset = 4,
|
|
};
|
|
|
|
static const struct at91_i2c_pdata at91sam9g10_config = {
|
|
.clk_max_div = 7,
|
|
.clk_offset = 4,
|
|
};
|
|
|
|
static const struct at91_i2c_pdata at91sam9x5_config = {
|
|
.clk_max_div = 7,
|
|
.clk_offset = 4,
|
|
};
|
|
|
|
static const struct at91_i2c_pdata sama5d4_config = {
|
|
.clk_max_div = 7,
|
|
.clk_offset = 4,
|
|
};
|
|
|
|
static const struct at91_i2c_pdata sama5d2_config = {
|
|
.clk_max_div = 7,
|
|
.clk_offset = 3,
|
|
};
|
|
|
|
static const struct udevice_id at91_i2c_ids[] = {
|
|
{ .compatible = "atmel,at91rm9200-i2c", .data = (long)&at91rm9200_config },
|
|
{ .compatible = "atmel,at91sam9260-i2c", .data = (long)&at91sam9260_config },
|
|
{ .compatible = "atmel,at91sam9261-i2c", .data = (long)&at91sam9261_config },
|
|
{ .compatible = "atmel,at91sam9g20-i2c", .data = (long)&at91sam9g20_config },
|
|
{ .compatible = "atmel,at91sam9g10-i2c", .data = (long)&at91sam9g10_config },
|
|
{ .compatible = "atmel,at91sam9x5-i2c", .data = (long)&at91sam9x5_config },
|
|
{ .compatible = "atmel,sama5d4-i2c", .data = (long)&sama5d4_config },
|
|
{ .compatible = "atmel,sama5d2-i2c", .data = (long)&sama5d2_config },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(i2c_at91) = {
|
|
.name = "i2c_at91",
|
|
.id = UCLASS_I2C,
|
|
.of_match = at91_i2c_ids,
|
|
.probe = at91_i2c_probe,
|
|
.of_to_plat = at91_i2c_of_to_plat,
|
|
.per_child_auto = sizeof(struct dm_i2c_chip),
|
|
.priv_auto = sizeof(struct at91_i2c_bus),
|
|
.ops = &at91_i2c_ops,
|
|
};
|