mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 23:47:24 +00:00
05c2ff7dc6
This commit adds SD/MMC clocks, and provides .set/get_rate callbacks for SD/MMC device present on Actions OWL S700 SoCs. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
265 lines
6.1 KiB
C
265 lines
6.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Common clock driver for Actions Semi SoCs.
|
|
*
|
|
* Copyright (C) 2015 Actions Semi Co., Ltd.
|
|
* Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include "clk_owl.h"
|
|
#include <asm/io.h>
|
|
#if defined(CONFIG_MACH_S900)
|
|
#include <asm/arch-owl/regs_s900.h>
|
|
#include <dt-bindings/clock/actions,s900-cmu.h>
|
|
#elif defined(CONFIG_MACH_S700)
|
|
#include <asm/arch-owl/regs_s700.h>
|
|
#include <dt-bindings/clock/actions,s700-cmu.h>
|
|
#endif
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
|
|
#define CMU_DEVCLKEN0_SD0 BIT(22)
|
|
|
|
void owl_clk_init(struct owl_clk_priv *priv)
|
|
{
|
|
u32 bus_clk = 0, core_pll, dev_pll;
|
|
|
|
#if defined(CONFIG_MACH_S900)
|
|
/* Enable ASSIST_PLL */
|
|
setbits_le32(priv->base + CMU_ASSISTPLL, BIT(0));
|
|
udelay(PLL_STABILITY_WAIT_US);
|
|
#endif
|
|
|
|
/* Source HOSC to DEV_CLK */
|
|
clrbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
|
|
|
|
/* Configure BUS_CLK */
|
|
bus_clk |= (CMU_PDBGDIV_DIV | CMU_PERDIV_DIV | CMU_NOCDIV_DIV |
|
|
CMU_DMMCLK_SRC | CMU_APBCLK_DIV | CMU_AHBCLK_DIV |
|
|
CMU_NOCCLK_SRC | CMU_CORECLK_HOSC);
|
|
writel(bus_clk, priv->base + CMU_BUSCLK);
|
|
|
|
udelay(PLL_STABILITY_WAIT_US);
|
|
|
|
/* Configure CORE_PLL */
|
|
core_pll = readl(priv->base + CMU_COREPLL);
|
|
core_pll |= (CMU_COREPLL_EN | CMU_COREPLL_HOSC_EN | CMU_COREPLL_OUT);
|
|
writel(core_pll, priv->base + CMU_COREPLL);
|
|
|
|
udelay(PLL_STABILITY_WAIT_US);
|
|
|
|
/* Configure DEV_PLL */
|
|
dev_pll = readl(priv->base + CMU_DEVPLL);
|
|
dev_pll |= (CMU_DEVPLL_EN | CMU_DEVPLL_OUT);
|
|
writel(dev_pll, priv->base + CMU_DEVPLL);
|
|
|
|
udelay(PLL_STABILITY_WAIT_US);
|
|
|
|
/* Source CORE_PLL for CORE_CLK */
|
|
clrsetbits_le32(priv->base + CMU_BUSCLK, CMU_CORECLK_MASK,
|
|
CMU_CORECLK_CPLL);
|
|
|
|
/* Source DEV_PLL for DEV_CLK */
|
|
setbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
|
|
|
|
udelay(PLL_STABILITY_WAIT_US);
|
|
}
|
|
|
|
int owl_clk_enable(struct clk *clk)
|
|
{
|
|
struct owl_clk_priv *priv = dev_get_priv(clk->dev);
|
|
enum owl_soc model = dev_get_driver_data(clk->dev);
|
|
|
|
switch (clk->id) {
|
|
case CLK_UART5:
|
|
if (model != S900)
|
|
return -EINVAL;
|
|
/* Source HOSC for UART5 interface */
|
|
clrbits_le32(priv->base + CMU_UART5CLK, CMU_UARTCLK_SRC_DEVPLL);
|
|
/* Enable UART5 interface clock */
|
|
setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
|
|
break;
|
|
case CLK_UART3:
|
|
if (model != S700)
|
|
return -EINVAL;
|
|
/* Source HOSC for UART3 interface */
|
|
clrbits_le32(priv->base + CMU_UART3CLK, CMU_UARTCLK_SRC_DEVPLL);
|
|
/* Enable UART3 interface clock */
|
|
setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART3);
|
|
break;
|
|
case CLK_RMII_REF:
|
|
case CLK_ETHERNET:
|
|
setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_ETH);
|
|
setbits_le32(priv->base + CMU_ETHERNETPLL, 5);
|
|
break;
|
|
case CLK_SD0:
|
|
setbits_le32(priv->base + CMU_DEVCLKEN0, CMU_DEVCLKEN0_SD0);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int owl_clk_disable(struct clk *clk)
|
|
{
|
|
struct owl_clk_priv *priv = dev_get_priv(clk->dev);
|
|
enum owl_soc model = dev_get_driver_data(clk->dev);
|
|
|
|
switch (clk->id) {
|
|
case CLK_UART5:
|
|
if (model != S900)
|
|
return -EINVAL;
|
|
/* Disable UART5 interface clock */
|
|
clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
|
|
break;
|
|
case CLK_UART3:
|
|
if (model != S700)
|
|
return -EINVAL;
|
|
/* Disable UART3 interface clock */
|
|
clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART3);
|
|
break;
|
|
case CLK_RMII_REF:
|
|
case CLK_ETHERNET:
|
|
clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_ETH);
|
|
break;
|
|
case CLK_SD0:
|
|
clrbits_le32(priv->base + CMU_DEVCLKEN0, CMU_DEVCLKEN0_SD0);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ulong get_sd_parent_rate(struct owl_clk_priv *priv, u32 dev_index)
|
|
{
|
|
ulong rate;
|
|
u32 reg;
|
|
|
|
reg = readl(priv->base + (CMU_SD0CLK + dev_index * 0x4));
|
|
/* Clock output of DEV/NAND_PLL
|
|
* Range: 48M ~ 756M
|
|
* Frequency= PLLCLK * 6
|
|
*/
|
|
if (reg & 0x200)
|
|
rate = readl(priv->base + CMU_NANDPLL) & 0x7f;
|
|
else
|
|
rate = readl(priv->base + CMU_DEVPLL) & 0x7f;
|
|
|
|
rate *= 6000000;
|
|
|
|
return rate;
|
|
}
|
|
|
|
static ulong owl_get_sd_clk_rate(struct owl_clk_priv *priv, int sd_index)
|
|
{
|
|
uint div, val;
|
|
ulong parent_rate = get_sd_parent_rate(priv, sd_index);
|
|
|
|
val = readl(priv->base + (CMU_SD0CLK + sd_index * 0x4));
|
|
div = (val & 0x1f) + 1;
|
|
|
|
return (parent_rate / div);
|
|
}
|
|
|
|
static ulong owl_set_sd_clk_rate(struct owl_clk_priv *priv, ulong rate,
|
|
int sd_index)
|
|
{
|
|
uint div, val;
|
|
ulong parent_rate = get_sd_parent_rate(priv, sd_index);
|
|
|
|
if (rate == 0)
|
|
return rate;
|
|
|
|
div = (parent_rate / rate);
|
|
|
|
val = readl(priv->base + (CMU_SD0CLK + sd_index * 0x4));
|
|
/* Bits 4..0 is used to program div value and bit 8 to enable
|
|
* divide by 128 circuit
|
|
*/
|
|
val &= ~0x11f;
|
|
if (div >= 128) {
|
|
div = div / 128;
|
|
val |= 0x100; /* enable divide by 128 circuit */
|
|
}
|
|
val |= ((div - 1) & 0x1f);
|
|
writel(val, priv->base + (CMU_SD0CLK + sd_index * 0x4));
|
|
|
|
return owl_get_sd_clk_rate(priv, 0);
|
|
}
|
|
|
|
static ulong owl_clk_get_rate(struct clk *clk)
|
|
{
|
|
struct owl_clk_priv *priv = dev_get_priv(clk->dev);
|
|
ulong rate;
|
|
|
|
switch (clk->id) {
|
|
case CLK_SD0:
|
|
rate = owl_get_sd_clk_rate(priv, 0);
|
|
break;
|
|
default:
|
|
return -ENOENT;
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
|
|
static ulong owl_clk_set_rate(struct clk *clk, ulong rate)
|
|
{
|
|
struct owl_clk_priv *priv = dev_get_priv(clk->dev);
|
|
ulong new_rate;
|
|
|
|
switch (clk->id) {
|
|
case CLK_SD0:
|
|
new_rate = owl_set_sd_clk_rate(priv, rate, 0);
|
|
break;
|
|
default:
|
|
return -ENOENT;
|
|
}
|
|
|
|
return new_rate;
|
|
}
|
|
|
|
static int owl_clk_probe(struct udevice *dev)
|
|
{
|
|
struct owl_clk_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->base = dev_read_addr(dev);
|
|
if (priv->base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
/* setup necessary clocks */
|
|
owl_clk_init(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops owl_clk_ops = {
|
|
.enable = owl_clk_enable,
|
|
.disable = owl_clk_disable,
|
|
.get_rate = owl_clk_get_rate,
|
|
.set_rate = owl_clk_set_rate,
|
|
};
|
|
|
|
static const struct udevice_id owl_clk_ids[] = {
|
|
#if defined(CONFIG_MACH_S900)
|
|
{ .compatible = "actions,s900-cmu", .data = S900 },
|
|
#elif defined(CONFIG_MACH_S700)
|
|
{ .compatible = "actions,s700-cmu", .data = S700 },
|
|
#endif
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(clk_owl) = {
|
|
.name = "clk_owl",
|
|
.id = UCLASS_CLK,
|
|
.of_match = owl_clk_ids,
|
|
.ops = &owl_clk_ops,
|
|
.priv_auto = sizeof(struct owl_clk_priv),
|
|
.probe = owl_clk_probe,
|
|
};
|