mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
2d18ef2364
Add ARMv7M STM32F1 support including clocks, timer, gpio, and flash. Signed-off-by: Matt Porter <mporter@konsulko.com>
180 lines
3.9 KiB
C
180 lines
3.9 KiB
C
/*
|
|
* (C) Copyright 2015
|
|
* Kamil Lulko, <rev13@wp.pl>
|
|
*
|
|
* Copyright 2015 ATS Advanced Telematics Systems GmbH
|
|
* Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/stm32.h>
|
|
|
|
#define STM32_FLASH_KEY1 0x45670123
|
|
#define STM32_FLASH_KEY2 0xcdef89ab
|
|
|
|
#define STM32_NUM_BANKS 2
|
|
#define STM32_MAX_BANK 0x200
|
|
|
|
flash_info_t flash_info[STM32_NUM_BANKS];
|
|
static struct stm32_flash_bank_regs *flash_bank[STM32_NUM_BANKS];
|
|
|
|
static void stm32f1_flash_lock(u8 bank, u8 lock)
|
|
{
|
|
if (lock) {
|
|
setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_LOCK);
|
|
} else {
|
|
writel(STM32_FLASH_KEY1, &flash_bank[bank]->keyr);
|
|
writel(STM32_FLASH_KEY2, &flash_bank[bank]->keyr);
|
|
}
|
|
}
|
|
|
|
/* Only XL devices are supported (2 KiB sector size) */
|
|
unsigned long flash_init(void)
|
|
{
|
|
u8 i, banks;
|
|
u16 j, size;
|
|
|
|
/* Set up accessors for XL devices with wonky register layout */
|
|
flash_bank[0] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr;
|
|
flash_bank[1] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr2;
|
|
|
|
/*
|
|
* Get total flash size (in KiB) and configure number of banks
|
|
* present and sector count per bank.
|
|
*/
|
|
size = readw(&STM32_DES->flash_size);
|
|
if (size <= STM32_MAX_BANK) {
|
|
banks = 1;
|
|
flash_info[0].sector_count = size >> 1;
|
|
} else if (size > STM32_MAX_BANK) {
|
|
banks = 2;
|
|
flash_info[0].sector_count = STM32_MAX_BANK >> 1;
|
|
flash_info[1].sector_count = (size - STM32_MAX_BANK) >> 1;
|
|
}
|
|
|
|
/* Configure start/size for all sectors */
|
|
for (i = 0; i < banks; i++) {
|
|
flash_info[i].flash_id = FLASH_STM32F1;
|
|
flash_info[i].start[0] = CONFIG_SYS_FLASH_BASE + (i << 19);
|
|
flash_info[i].size = 2048;
|
|
for (j = 1; (j < flash_info[i].sector_count); j++) {
|
|
flash_info[i].start[j] = flash_info[i].start[j - 1]
|
|
+ 2048;
|
|
flash_info[i].size += 2048;
|
|
}
|
|
}
|
|
|
|
return size << 10;
|
|
}
|
|
|
|
void flash_print_info(flash_info_t *info)
|
|
{
|
|
int i;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf("Missing or unknown FLASH type\n");
|
|
return;
|
|
} else if (info->flash_id == FLASH_STM32F1) {
|
|
printf("STM32F1 Embedded Flash\n");
|
|
}
|
|
|
|
printf(" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 10, info->sector_count);
|
|
|
|
printf(" Sector Start Addresses:");
|
|
for (i = 0; i < info->sector_count; ++i) {
|
|
if ((i % 5) == 0)
|
|
printf("\n ");
|
|
printf(" %08lX%s",
|
|
info->start[i],
|
|
info->protect[i] ? " (RO)" : " ");
|
|
}
|
|
printf("\n");
|
|
return;
|
|
}
|
|
|
|
int flash_erase(flash_info_t *info, int first, int last)
|
|
{
|
|
u8 bank = 0xff;
|
|
int i;
|
|
|
|
for (i = 0; i < STM32_NUM_BANKS; i++) {
|
|
if (info == &flash_info[i]) {
|
|
bank = i;
|
|
break;
|
|
}
|
|
}
|
|
if (bank == 0xff)
|
|
return -1;
|
|
|
|
stm32f1_flash_lock(bank, 0);
|
|
|
|
for (i = first; i <= last; i++) {
|
|
while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
|
|
;
|
|
|
|
setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER);
|
|
|
|
writel(info->start[i], &flash_bank[bank]->ar);
|
|
|
|
setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_STRT);
|
|
|
|
while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
|
|
;
|
|
}
|
|
|
|
clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER);
|
|
|
|
stm32f1_flash_lock(bank, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
|
|
{
|
|
ulong i;
|
|
u8 bank = 0xff;
|
|
|
|
if (addr & 1) {
|
|
printf("Flash address must be half word aligned\n");
|
|
return -1;
|
|
}
|
|
|
|
if (cnt & 1) {
|
|
printf("Flash length must be half word aligned\n");
|
|
return -1;
|
|
}
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
if (info == &flash_info[i]) {
|
|
bank = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (bank == 0xff)
|
|
return -1;
|
|
|
|
while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
|
|
;
|
|
|
|
stm32f1_flash_lock(bank, 0);
|
|
|
|
setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG);
|
|
|
|
/* STM32F1 requires half word writes */
|
|
for (i = 0; i < cnt >> 1; i++) {
|
|
*(u16 *)(addr + i * 2) = ((u16 *)src)[i];
|
|
while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
|
|
;
|
|
}
|
|
|
|
clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG);
|
|
|
|
stm32f1_flash_lock(bank, 1);
|
|
|
|
return 0;
|
|
}
|