u-boot/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c
Masahiro Yamada 5894ca007d ARM: UniPhier: add UniPhier SoC support code
These are used by Panasonic UniPhier SoC family.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-05 14:10:09 +09:00

75 lines
2.3 KiB
C

/*
* Copyright (C) 2011-2014 Panasonic Corporation
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/sbc-regs.h>
#include <asm/arch/sg-regs.h>
void sbc_init(void)
{
#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
/*
* Only CS1 is connected to support card.
* BKSZ[1:0] should be set to "01".
*/
writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10);
writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11);
writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12);
writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14);
if (readl(SBBASE0) & 0x1) {
/*
* Boot Swap Off: boot from mask ROM
* 0x00000000-0x01ffffff: mask ROM
* 0x02000000-0x3effffff: memory bank (31MB)
* 0x03f00000-0x3fffffff: peripherals (1MB)
*/
writel(0x0000be01, SBBASE0); /* dummy */
writel(0x0200be01, SBBASE1);
} else {
/*
* Boot Swap On: boot from external NOR/SRAM
* 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff.
*
* 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank
* 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals
*/
writel(0x0000bc01, SBBASE0);
}
#elif defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
#if !defined(CONFIG_SPL_BUILD)
/* XECS0: boot/sub memory (boot swap = off/on) */
writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00);
writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01);
writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02);
writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04);
#endif
/* XECS1: sub/boot memory (boot swap = off/on) */
writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10);
writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11);
writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12);
writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14);
/* XECS3: peripherals */
writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30);
writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31);
writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32);
writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34);
writel(0x0000bc01, SBBASE0); /* boot memory */
writel(0x0400bc01, SBBASE1); /* sub memory */
writel(0x0800bf01, SBBASE3); /* peripherals */
#if !defined(CONFIG_SPL_BUILD)
sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */
#endif
sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */
writel(0x00000001, SG_LOADPINCTRL);
#endif /* CONFIG_XXX_MICRO_SUPPORT_CARD */
}