u-boot/drivers
Liu Gang b5f7c8732a powerpc/corenet_ds: Master module for boot from PCIE
For the powerpc processors with PCIE interface, boot location can be
configured from one PCIE interface by RCW. The processor booting from PCIE
can do without flash for u-boot image. The image can be fetched from another
processor's memory space by PCIE link connected between them.

The processor booting from PCIE is slave, the processor booting from normal
flash memory space is master, and it can help slave to boot from master's
memory space.

When boot from PCIE, slave's core should be in holdoff after powered on for
some specific requirements. Master will release the slave's core at the
right time by PCIE interface.

Environment and requirement:

master:
    1. NOR flash for its own u-boot image, ucode and ENV space.
    2. Slave's u-boot image is in master NOR flash.
    3. Normally boot from local NOR flash.
    4. Configure PCIE system if needed.
slave:
    1. Just has EEPROM for RCW. No flash for u-boot image, ucode and ENV.
    2. Boot location should be set to one PCIE interface by RCW.
    3. RCW should configure the SerDes, PCIE interfaces correctly.
	4. Must set all the cores in holdoff by RCW.
	5. Must be powered on before master's boot.

For the master module, need to finish these processes:
    1. Initialize the PCIE port and address space.
    2. Set inbound PCIE windows covered slave's u-boot image stored in
       master's NOR flash.
	3. Set outbound windows in order to configure slave's registers
	   for the core's releasing.
    4. Should set the environment variable "bootmaster" to "PCIE1", "PCIE2"
	   or "PCIE3" using the following command:

			setenv bootmaster PCIE1
			saveenv

Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23 10:24:15 -05:00
..
bios_emulator Add abs() macro to return absolute value 2012-05-15 08:31:37 +02:00
block Remove remaining mdelay() macros 2012-07-08 22:15:08 +02:00
dma DMA: Split the APBH DMA init into block and channel init 2012-04-16 14:53:59 +02:00
fpga Remove execute permissions from source files 2012-03-04 21:56:15 +01:00
gpio sh: Add support pin function control using GPIO 2012-08-08 10:24:41 +09:00
hwmon hwmon: do not init sensors on startup 2011-08-04 23:30:38 +02:00
i2c I2C: Add support for Multi channel 2012-07-31 08:03:03 +02:00
input tegra: Add tegra keyboard driver 2012-05-15 08:31:40 +02:00
misc powerpc/corenet_ds: Get rid of the CONFIG_SRIOBOOT_SLAVE_PORTx macro 2012-08-23 10:24:14 -05:00
mmc FSL/eSDHC: enable the clock to detect the SD card 2012-07-13 17:04:50 -05:00
mtd mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashs 2012-08-13 14:34:44 +02:00
net Merge branch 'next' of git://git.denx.de/u-boot 2012-07-30 20:39:52 +02:00
pci powerpc/corenet_ds: Master module for boot from PCIE 2012-08-23 10:24:15 -05:00
pcmcia PXA: Remove PXA PCMCIA support 2012-03-26 23:09:23 +02:00
power i2c: Add TPS6586X driver 2012-05-15 08:31:37 +02:00
qe drivers/qe/uec.c: Fix compile warning 2012-05-22 13:41:48 -05:00
rtc Add support for DS1388. 2012-08-10 23:46:54 +02:00
serial serial: sh: Add support Renesas R8A7740 2012-08-08 09:52:06 +09:00
spi spi: Fix merge conflicts - Makefile 2012-08-07 23:08:14 +02:00
tpm Introduce generic TPM support in u-boot 2011-12-07 08:45:51 +01:00
twserial Switch from archive libraries to partial linking 2010-11-17 21:02:18 +01:00
usb i.mx: iomux-v3.h: move to imx-common include directory 2012-07-31 08:00:19 +02:00
video ipu_common: Add ldb_clk for use in parenting the pixel clock 2012-07-10 11:35:39 +02:00
watchdog AT91: fix at91sam_wdt.c to reworked header files 2011-05-18 07:56:51 +02:00