mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
b5ec417b56
This adds some additional info about booting from different sources, including the correct switch positions. Signed-off-by: Sean Anderson <sean.anderson@seco.com>
111 lines
3.7 KiB
ReStructuredText
111 lines
3.7 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
LS1046ARDB
|
|
==========
|
|
|
|
The LS1046A Reference Design Board (RDB) is a high-performance computing,
|
|
evaluation, and development platform that supports the QorIQ LS1046A
|
|
LayerScape Architecture processor. The LS1046ARDB provides SW development
|
|
platform for the Freescale LS1046A processor series, with a complete
|
|
debugging environment. The LS1046A RDB is lead-free and RoHS-compliant.
|
|
|
|
LS1046A SoC Overview
|
|
--------------------
|
|
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1046A
|
|
SoC overview.
|
|
|
|
LS1046ARDB board Overview
|
|
-------------------------
|
|
- SERDES1 Connections, 4 lanes supporting:
|
|
|
|
- Lane0: 10GBase-R with x1 RJ45 connector
|
|
- Lane1: 10GBase-R Cage
|
|
- Lane2: SGMII.5
|
|
- Lane3: SGMII.6
|
|
|
|
- SERDES2 Connections, 4 lanes supporting:
|
|
|
|
- Lane0: PCIe1 with miniPCIe slot
|
|
- Lane1: PCIe2 with PCIe x2 slot
|
|
- Lane2: PCIe3 with PCIe x4 slot
|
|
- Lane3: SATA
|
|
|
|
- DDR Controller
|
|
|
|
- 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s
|
|
|
|
- IFC/Local Bus
|
|
|
|
- One 512 MB NAND flash with ECC support
|
|
- CPLD connection
|
|
|
|
- USB 3.0
|
|
|
|
- one Type A port, one Micro-AB port
|
|
|
|
- SDHC: connects directly to a full SD/MMC slot
|
|
- DSPI: 64 MB high-speed flash Memory for boot code and storage (up to 108MHz)
|
|
- 4 I2C controllers
|
|
- UART
|
|
|
|
- Two 4-pin serial ports at up to 115.2 Kbit/s
|
|
- Two DB9 D-Type connectors supporting one Serial port each
|
|
|
|
- ARM JTAG support
|
|
|
|
Memory map from core's view
|
|
----------------------------
|
|
|
|
================== ================== ================ =====
|
|
Start Address End Address Description Size
|
|
================== ================== ================ =====
|
|
``0x00_0000_0000`` ``0x00_000F_FFFF`` Secure Boot ROM 1M
|
|
``0x00_0100_0000`` ``0x00_0FFF_FFFF`` CCSRBAR 240M
|
|
``0x00_1000_0000`` ``0x00_1000_FFFF`` OCRAM0 64K
|
|
``0x00_1001_0000`` ``0x00_1001_FFFF`` OCRAM1 64K
|
|
``0x00_2000_0000`` ``0x00_20FF_FFFF`` DCSR 16M
|
|
``0x00_7E80_0000`` ``0x00_7E80_FFFF`` IFC - NAND Flash 64K
|
|
``0x00_7FB0_0000`` ``0x00_7FB0_0FFF`` IFC - CPLD 4K
|
|
``0x00_8000_0000`` ``0x00_FFFF_FFFF`` DRAM1 2G
|
|
``0x05_0000_0000`` ``0x05_07FF_FFFF`` QMAN S/W Portal 128M
|
|
``0x05_0800_0000`` ``0x05_0FFF_FFFF`` BMAN S/W Portal 128M
|
|
``0x08_8000_0000`` ``0x09_FFFF_FFFF`` DRAM2 6G
|
|
``0x40_0000_0000`` ``0x47_FFFF_FFFF`` PCI Express1 32G
|
|
``0x48_0000_0000`` ``0x4F_FFFF_FFFF`` PCI Express2 32G
|
|
``0x50_0000_0000`` ``0x57_FFFF_FFFF`` PCI Express3 32G
|
|
================== ================== ================ =====
|
|
|
|
QSPI flash map
|
|
--------------
|
|
|
|
================== ================== ================== =====
|
|
Start Address End Address Description Size
|
|
================== ================== ================== =====
|
|
``0x00_4000_0000`` ``0x00_400F_FFFF`` RCW + PBI 1M
|
|
``0x00_4010_0000`` ``0x00_402F_FFFF`` U-Boot 2M
|
|
``0x00_4030_0000`` ``0x00_403F_FFFF`` U-Boot Env 1M
|
|
``0x00_4040_0000`` ``0x00_405F_FFFF`` PPA 2M
|
|
``0x00_4060_0000`` ``0x00_408F_FFFF`` Secure boot header 3M
|
|
+ bootscript
|
|
``0x00_4090_0000`` ``0x00_4093_FFFF`` FMan ucode 256K
|
|
``0x00_4094_0000`` ``0x00_4097_FFFF`` QE/uQE firmware 256K
|
|
``0x00_4098_0000`` ``0x00_40FF_FFFF`` Reserved 6M
|
|
``0x00_4100_0000`` ``0x00_43FF_FFFF`` FIT Image 48M
|
|
================== ================== ================== =====
|
|
|
|
Booting Options
|
|
---------------
|
|
|
|
NB: The reference manual documents the RCW source with the *least-significant
|
|
bit first*.
|
|
|
|
QSPI boot
|
|
^^^^^^^^^
|
|
|
|
This is the default. ``{ SW5[0:8], SW4[0] }`` should be ``0010_0010_0``.
|
|
|
|
SD boot and eMMC boot
|
|
^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
``{ SW5[0:8], SW4[0] }`` should be ``0010_0000_0``. eMMC is selected only if
|
|
there is no SD card in the slot.
|