mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-29 08:01:08 +00:00
f0f3762cb7
Taking into account the Amlogic Family name starts with GX, including the GXBB, GXL and GXM SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> |
||
---|---|---|
.. | ||
Kconfig | ||
khadas-vim.c | ||
MAINTAINERS | ||
Makefile | ||
README |
U-Boot for Khadas VIM ======================= Khadas VIM is an Open Source DIY Box manufactured by Shenzhen Wesion Technology Co., Ltd with the following specifications: - Amlogic S905x ARM Cortex-A53 quad-core SoC @ 2GHz - ARM Mali 450 GPU - 2GB DDR3 SDRAM - 10/100 Ethernet - HDMI 2.0 4K/60Hz display - 40-pin GPIO header - 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG - 8GB/16GBeMMC - microSD - SDIO Wifi Module, Bluetooth - Two channels IR receiver Currently the u-boot port supports the following devices: - serial - eMMC, microSD - Ethernet U-Boot compilation ================== > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make khadas-vim_defconfig > make Image creation ============== Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > git clone https://github.com/khadas/u-boot -b Vim vim-u-boot > cd vim-u-boot > make kvim_defconfig > make > export FIPDIR=$PWD/fip Go back to mainline U-Boot source tree then : > mkdir fip > cp $FIPDIR/gxl/bl2.bin fip/ > cp $FIPDIR/gxl/acs.bin fip/ > cp $FIPDIR/gxl/bl21.bin fip/ > cp $FIPDIR/gxl/bl30.bin fip/ > cp $FIPDIR/gxl/bl301.bin fip/ > cp $FIPDIR/gxl/bl31.img fip/ > cp u-boot.bin fip/bl33.bin > $FIPDIR/blx_fix.sh \ fip/bl30.bin \ fip/zero_tmp \ fip/bl30_zero.bin \ fip/bl301.bin \ fip/bl301_zero.bin \ fip/bl30_new.bin \ bl30 > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > $FIPDIR/blx_fix.sh \ fip/bl2_acs.bin \ fip/zero_tmp \ fip/bl2_zero.bin \ fip/bl21.bin \ fip/bl21_zero.bin \ fip/bl2_new.bin \ bl2 > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ --output fip/u-boot.bin \ --bl2 fip/bl2.n.bin.sig \ --bl30 fip/bl30_new.bin.enc \ --bl31 fip/bl31.img.enc \ --bl33 fip/bl33.bin.enc and then write the image to SD with: > DEV=/dev/your_sd_device > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444