u-boot/board/ti/am43xx/board.c
Lokesh Vutla b5e01eecc8 ARM: AM43xx: GP_EVM: Add support for DDR3
GP EVM has 1GB DDR3 attached(Part no: MT41K512M8RH).
Adding details for the same.
Below is the brief description of DDR3 init sequence(SW leveling):
-> Enable VTT regulator
-> Configure VTP
-> Configure DDR IO settings
-> Disable initialization and refreshes until EMIF registers are programmed.
-> Program Timing registers
-> Program leveling registers
-> Program PHY control and Temp alert and ZQ config registers.
-> Enable initialization and refreshes and configure SDRAM CONFIG register

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-12-18 21:14:45 -05:00

404 lines
10 KiB
C

/*
* board.c
*
* Board functions for TI AM43XX based boards
*
* Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <i2c.h>
#include <asm/errno.h>
#include <spl.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mux.h>
#include <asm/arch/ddr_defs.h>
#include <asm/arch/gpio.h>
#include <asm/emif.h>
#include "board.h"
DECLARE_GLOBAL_DATA_PTR;
/*
* Read header information from EEPROM into global structure.
*/
static int read_eeprom(struct am43xx_board_id *header)
{
/* Check if baseboard eeprom is available */
if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
printf("Could not probe the EEPROM at 0x%x\n",
CONFIG_SYS_I2C_EEPROM_ADDR);
return -ENODEV;
}
/* read the eeprom using i2c */
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)header,
sizeof(struct am43xx_board_id))) {
printf("Could not read the EEPROM\n");
return -EIO;
}
if (header->magic != 0xEE3355AA) {
/*
* read the eeprom using i2c again,
* but use only a 1 byte address
*/
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, (uchar *)header,
sizeof(struct am43xx_board_id))) {
printf("Could not read the EEPROM at 0x%x\n",
CONFIG_SYS_I2C_EEPROM_ADDR);
return -EIO;
}
if (header->magic != 0xEE3355AA) {
printf("Incorrect magic number (0x%x) in EEPROM\n",
header->magic);
return -EINVAL;
}
}
strncpy(am43xx_board_name, (char *)header->name, sizeof(header->name));
am43xx_board_name[sizeof(header->name)] = 0;
return 0;
}
#ifdef CONFIG_SPL_BUILD
#define NUM_OPPS 6
const struct dpll_params dpll_mpu[NUM_CRYSTAL_FREQ][NUM_OPPS] = {
{ /* 19.2 MHz */
{-1, -1, -1, -1, -1, -1, -1}, /* OPP 50 */
{-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
{-1, -1, -1, -1, -1, -1, -1}, /* OPP 100 */
{-1, -1, -1, -1, -1, -1, -1}, /* OPP 120 */
{-1, -1, -1, -1, -1, -1, -1}, /* OPP TB */
{-1, -1, -1, -1, -1, -1, -1} /* OPP NT */
},
{ /* 24 MHz */
{300, 23, 1, -1, -1, -1, -1}, /* OPP 50 */
{-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
{600, 23, 1, -1, -1, -1, -1}, /* OPP 100 */
{720, 23, 1, -1, -1, -1, -1}, /* OPP 120 */
{800, 23, 1, -1, -1, -1, -1}, /* OPP TB */
{1000, 23, 1, -1, -1, -1, -1} /* OPP NT */
},
{ /* 25 MHz */
{300, 24, 1, -1, -1, -1, -1}, /* OPP 50 */
{-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
{600, 24, 1, -1, -1, -1, -1}, /* OPP 100 */
{720, 24, 1, -1, -1, -1, -1}, /* OPP 120 */
{800, 24, 1, -1, -1, -1, -1}, /* OPP TB */
{1000, 24, 1, -1, -1, -1, -1} /* OPP NT */
},
{ /* 26 MHz */
{300, 25, 1, -1, -1, -1, -1}, /* OPP 50 */
{-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
{600, 25, 1, -1, -1, -1, -1}, /* OPP 100 */
{720, 25, 1, -1, -1, -1, -1}, /* OPP 120 */
{800, 25, 1, -1, -1, -1, -1}, /* OPP TB */
{1000, 25, 1, -1, -1, -1, -1} /* OPP NT */
},
};
const struct dpll_params dpll_core[NUM_CRYSTAL_FREQ] = {
{-1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
{1000, 23, -1, -1, 10, 8, 4}, /* 24 MHz */
{1000, 24, -1, -1, 10, 8, 4}, /* 25 MHz */
{1000, 25, -1, -1, 10, 8, 4} /* 26 MHz */
};
const struct dpll_params dpll_per[NUM_CRYSTAL_FREQ] = {
{-1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
{960, 23, 5, -1, -1, -1, -1}, /* 24 MHz */
{960, 24, 5, -1, -1, -1, -1}, /* 25 MHz */
{960, 25, 5, -1, -1, -1, -1} /* 26 MHz */
};
const struct dpll_params epos_evm_dpll_ddr = {
266, 24, 1, -1, 1, -1, -1};
const struct dpll_params gp_evm_dpll_ddr = {
400, 23, 1, -1, 1, -1, -1};
const struct ctrl_ioregs ioregs_lpddr2 = {
.cm0ioctl = LPDDR2_ADDRCTRL_IOCTRL_VALUE,
.cm1ioctl = LPDDR2_ADDRCTRL_WD0_IOCTRL_VALUE,
.cm2ioctl = LPDDR2_ADDRCTRL_WD1_IOCTRL_VALUE,
.dt0ioctl = LPDDR2_DATA0_IOCTRL_VALUE,
.dt1ioctl = LPDDR2_DATA0_IOCTRL_VALUE,
.dt2ioctrl = LPDDR2_DATA0_IOCTRL_VALUE,
.dt3ioctrl = LPDDR2_DATA0_IOCTRL_VALUE,
.emif_sdram_config_ext = 0x1,
};
const struct emif_regs emif_regs_lpddr2 = {
.sdram_config = 0x808012BA,
.ref_ctrl = 0x0000040D,
.sdram_tim1 = 0xEA86B411,
.sdram_tim2 = 0x103A094A,
.sdram_tim3 = 0x0F6BA37F,
.read_idle_ctrl = 0x00050000,
.zq_config = 0x50074BE4,
.temp_alert_config = 0x0,
.emif_rd_wr_lvl_rmp_win = 0x0,
.emif_rd_wr_lvl_rmp_ctl = 0x0,
.emif_rd_wr_lvl_ctl = 0x0,
.emif_ddr_phy_ctlr_1 = 0x0E084006,
.emif_rd_wr_exec_thresh = 0x00000405,
.emif_ddr_ext_phy_ctrl_1 = 0x04010040,
.emif_ddr_ext_phy_ctrl_2 = 0x00500050,
.emif_ddr_ext_phy_ctrl_3 = 0x00500050,
.emif_ddr_ext_phy_ctrl_4 = 0x00500050,
.emif_ddr_ext_phy_ctrl_5 = 0x00500050
};
const u32 ext_phy_ctrl_const_base_lpddr2[] = {
0x00500050,
0x00350035,
0x00350035,
0x00350035,
0x00350035,
0x00350035,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x40001000,
0x08102040
};
const struct ctrl_ioregs ioregs_ddr3 = {
.cm0ioctl = DDR3_ADDRCTRL_IOCTRL_VALUE,
.cm1ioctl = DDR3_ADDRCTRL_WD0_IOCTRL_VALUE,
.cm2ioctl = DDR3_ADDRCTRL_WD1_IOCTRL_VALUE,
.dt0ioctl = DDR3_DATA0_IOCTRL_VALUE,
.dt1ioctl = DDR3_DATA0_IOCTRL_VALUE,
.dt2ioctrl = DDR3_DATA0_IOCTRL_VALUE,
.dt3ioctrl = DDR3_DATA0_IOCTRL_VALUE,
.emif_sdram_config_ext = 0x0043,
};
const struct emif_regs ddr3_emif_regs_400Mhz = {
.sdram_config = 0x638413B2,
.ref_ctrl = 0x00000C30,
.sdram_tim1 = 0xEAAAD4DB,
.sdram_tim2 = 0x266B7FDA,
.sdram_tim3 = 0x107F8678,
.read_idle_ctrl = 0x00050000,
.zq_config = 0x50074BE4,
.temp_alert_config = 0x0,
.emif_ddr_phy_ctlr_1 = 0x0E084008,
.emif_ddr_ext_phy_ctrl_1 = 0x08020080,
.emif_ddr_ext_phy_ctrl_2 = 0x00400040,
.emif_ddr_ext_phy_ctrl_3 = 0x00400040,
.emif_ddr_ext_phy_ctrl_4 = 0x00400040,
.emif_ddr_ext_phy_ctrl_5 = 0x00400040,
.emif_rd_wr_lvl_rmp_win = 0x0,
.emif_rd_wr_lvl_rmp_ctl = 0x0,
.emif_rd_wr_lvl_ctl = 0x0,
.emif_rd_wr_exec_thresh = 0x00000405
};
const u32 ext_phy_ctrl_const_base_ddr3[] = {
0x00400040,
0x00350035,
0x00350035,
0x00350035,
0x00350035,
0x00350035,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00340034,
0x00340034,
0x00340034,
0x00340034,
0x00340034,
0x0,
0x0,
0x40000000,
0x08102040
};
void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
{
if (board_is_eposevm()) {
*regs = ext_phy_ctrl_const_base_lpddr2;
*size = ARRAY_SIZE(ext_phy_ctrl_const_base_lpddr2);
} else if (board_is_gpevm()) {
*regs = ext_phy_ctrl_const_base_ddr3;
*size = ARRAY_SIZE(ext_phy_ctrl_const_base_ddr3);
}
return;
}
const struct dpll_params *get_dpll_ddr_params(void)
{
struct am43xx_board_id header;
enable_i2c0_pin_mux();
i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
if (read_eeprom(&header) < 0)
puts("Could not get board ID.\n");
if (board_is_eposevm())
return &epos_evm_dpll_ddr;
else if (board_is_gpevm())
return &gp_evm_dpll_ddr;
puts(" Board not supported\n");
return NULL;
}
/*
* get_sys_clk_index : returns the index of the sys_clk read from
* ctrl status register. This value is either
* read from efuse or sysboot pins.
*/
static u32 get_sys_clk_index(void)
{
struct ctrl_stat *ctrl = (struct ctrl_stat *)CTRL_BASE;
u32 ind = readl(&ctrl->statusreg), src;
src = (ind & CTRL_CRYSTAL_FREQ_SRC_MASK) >> CTRL_CRYSTAL_FREQ_SRC_SHIFT;
if (src == CTRL_CRYSTAL_FREQ_SRC_EFUSE) /* Value read from EFUSE */
return ((ind & CTRL_CRYSTAL_FREQ_SELECTION_MASK) >>
CTRL_CRYSTAL_FREQ_SELECTION_SHIFT);
else /* Value read from SYS BOOT pins */
return ((ind & CTRL_SYSBOOT_15_14_MASK) >>
CTRL_SYSBOOT_15_14_SHIFT);
}
/*
* get_opp_offset:
* Returns the index for safest OPP of the device to boot.
* max_off: Index of the MAX OPP in DEV ATTRIBUTE register.
* min_off: Index of the MIN OPP in DEV ATTRIBUTE register.
* This data is read from dev_attribute register which is e-fused.
* A'1' in bit indicates OPP disabled and not available, a '0' indicates
* OPP available. Lowest OPP starts with min_off. So returning the
* bit with rightmost '0'.
*/
static int get_opp_offset(int max_off, int min_off)
{
struct ctrl_stat *ctrl = (struct ctrl_stat *)CTRL_BASE;
int opp = readl(&ctrl->dev_attr), offset, i;
for (i = max_off; i >= min_off; i--) {
offset = opp & (1 << i);
if (!offset)
return i;
}
return min_off;
}
const struct dpll_params *get_dpll_mpu_params(void)
{
int opp = get_opp_offset(DEV_ATTR_MAX_OFFSET, DEV_ATTR_MIN_OFFSET);
u32 ind = get_sys_clk_index();
return &dpll_mpu[ind][opp];
}
const struct dpll_params *get_dpll_core_params(void)
{
int ind = get_sys_clk_index();
return &dpll_core[ind];
}
const struct dpll_params *get_dpll_per_params(void)
{
int ind = get_sys_clk_index();
return &dpll_per[ind];
}
void set_uart_mux_conf(void)
{
enable_uart0_pin_mux();
}
void set_mux_conf_regs(void)
{
enable_board_pin_mux();
}
static void enable_vtt_regulator(void)
{
u32 temp;
/* enable module */
writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO0_BASE + OMAP_GPIO_CTRL);
/* enable output for GPIO0_22 */
writel(GPIO_SETDATAOUT(GPIO_22),
AM33XX_GPIO0_BASE + OMAP_GPIO_SETDATAOUT);
temp = readl(AM33XX_GPIO0_BASE + OMAP_GPIO_OE);
temp = temp & ~(GPIO_OE_ENABLE(GPIO_22));
writel(temp, AM33XX_GPIO0_BASE + OMAP_GPIO_OE);
}
void sdram_init(void)
{
/*
* EPOS EVM has 1GB LPDDR2 connected to EMIF.
* GP EMV has 1GB DDR3 connected to EMIF
* along with VTT regulator.
*/
if (board_is_eposevm()) {
config_ddr(0, &ioregs_lpddr2, NULL, NULL, &emif_regs_lpddr2, 0);
} else if (board_is_gpevm()) {
enable_vtt_regulator();
config_ddr(0, &ioregs_ddr3, NULL, NULL,
&ddr3_emif_regs_400Mhz, 0);
}
}
#endif
int board_init(void)
{
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
char safe_string[HDR_NAME_LEN + 1];
struct am43xx_board_id header;
if (read_eeprom(&header) < 0)
puts("Could not get board ID.\n");
/* Now set variables based on the header. */
strncpy(safe_string, (char *)header.name, sizeof(header.name));
safe_string[sizeof(header.name)] = 0;
setenv("board_name", safe_string);
strncpy(safe_string, (char *)header.version, sizeof(header.version));
safe_string[sizeof(header.version)] = 0;
setenv("board_rev", safe_string);
#endif
return 0;
}
#endif