mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 17:07:38 +00:00
0ef326b5e9
FriendlyARM NanoPi R5S is an open-sourced mini IoT gateway device. Board Specifications - Rockchip RK3568 - 2 or 4GB LPDDR4X - 8GB or 16GB eMMC, SD card slot - GbE LAN (Native) - 2x 2.5G LAN (PCIe) - M.2 Connector - HDMI 2.0, MIPI DSI/CSI - 2xUSB 3.0 Host - USB Type C PD, 5V/9V/12V - GPIO: 12-pin 0.5mm FPC connector The device tree is taken from kernel v6.4-rc1. Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Tianling Shen <cnsztl@gmail.com>
590 lines
12 KiB
Text
590 lines
12 KiB
Text
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
/*
|
|
* Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
|
|
* (http://www.friendlyelec.com)
|
|
*
|
|
* Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/soc/rockchip,vop2.h>
|
|
#include "rk3568.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
mmc0 = &sdmmc0;
|
|
mmc1 = &sdhci;
|
|
};
|
|
|
|
chosen: chosen {
|
|
stdout-path = "serial2:1500000n8";
|
|
};
|
|
|
|
hdmi-con {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con_in: endpoint {
|
|
remote-endpoint = <&hdmi_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
vdd_usbc: vdd-usbc-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_usbc";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
vcc3v3_sys: vcc3v3-sys-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vdd_usbc>;
|
|
};
|
|
|
|
vcc5v0_sys: vcc5v0-sys-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vdd_usbc>;
|
|
};
|
|
|
|
vcc3v3_pcie: vcc3v3-pcie-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_pcie";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
enable-active-high;
|
|
gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
|
startup-delay-us = <200000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc5v0_usb: vcc5v0-usb-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_usb";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vdd_usbc>;
|
|
};
|
|
|
|
vcc5v0_usb_host: vcc5v0-usb-host-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_usb_host_en>;
|
|
regulator-name = "vcc5v0_usb_host";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_usb>;
|
|
};
|
|
|
|
vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_usb_otg_en>;
|
|
regulator-name = "vcc5v0_usb_otg";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_usb>;
|
|
};
|
|
|
|
pcie30_avdd0v9: pcie30-avdd0v9-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pcie30_avdd0v9";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
vin-supply = <&vcc3v3_sys>;
|
|
};
|
|
|
|
pcie30_avdd1v8: pcie30-avdd1v8-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pcie30_avdd1v8";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc3v3_sys>;
|
|
};
|
|
};
|
|
|
|
&combphy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&cpu1 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&cpu2 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&cpu3 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_gpu>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
avdd-0v9-supply = <&vdda0v9_image>;
|
|
avdd-1v8-supply = <&vcca1v8_image>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_in {
|
|
hdmi_in_vp0: endpoint {
|
|
remote-endpoint = <&vp0_out_hdmi>;
|
|
};
|
|
};
|
|
|
|
&hdmi_out {
|
|
hdmi_out_con: endpoint {
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
};
|
|
};
|
|
|
|
&hdmi_sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
vdd_cpu: regulator@1c {
|
|
compatible = "tcs,tcs4525";
|
|
reg = <0x1c>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
regulator-name = "vdd_cpu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-ramp-delay = <2300>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
rk809: pmic@20 {
|
|
compatible = "rockchip,rk809";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
|
#clock-cells = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_int>;
|
|
rockchip,system-power-controller;
|
|
vcc1-supply = <&vcc3v3_sys>;
|
|
vcc2-supply = <&vcc3v3_sys>;
|
|
vcc3-supply = <&vcc3v3_sys>;
|
|
vcc4-supply = <&vcc3v3_sys>;
|
|
vcc5-supply = <&vcc3v3_sys>;
|
|
vcc6-supply = <&vcc3v3_sys>;
|
|
vcc7-supply = <&vcc3v3_sys>;
|
|
vcc8-supply = <&vcc3v3_sys>;
|
|
vcc9-supply = <&vcc3v3_sys>;
|
|
wakeup-source;
|
|
|
|
regulators {
|
|
vdd_logic: DCDC_REG1 {
|
|
regulator-name = "vdd_logic";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-init-microvolt = <900000>;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_gpu: DCDC_REG2 {
|
|
regulator-name = "vdd_gpu";
|
|
regulator-always-on;
|
|
regulator-init-microvolt = <900000>;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-name = "vcc_ddr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-initial-mode = <0x2>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_npu: DCDC_REG4 {
|
|
regulator-name = "vdd_npu";
|
|
regulator-init-microvolt = <900000>;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8: DCDC_REG5 {
|
|
regulator-name = "vcc_1v8";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda0v9_image: LDO_REG1 {
|
|
regulator-name = "vdda0v9_image";
|
|
regulator-min-microvolt = <950000>;
|
|
regulator-max-microvolt = <950000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda_0v9: LDO_REG2 {
|
|
regulator-name = "vdda_0v9";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda0v9_pmu: LDO_REG3 {
|
|
regulator-name = "vdda0v9_pmu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
vccio_acodec: LDO_REG4 {
|
|
regulator-name = "vccio_acodec";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vccio_sd: LDO_REG5 {
|
|
regulator-name = "vccio_sd";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc3v3_pmu: LDO_REG6 {
|
|
regulator-name = "vcc3v3_pmu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcca_1v8: LDO_REG7 {
|
|
regulator-name = "vcca_1v8";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca1v8_pmu: LDO_REG8 {
|
|
regulator-name = "vcca1v8_pmu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcca1v8_image: LDO_REG9 {
|
|
regulator-name = "vcca1v8_image";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_3v3: SWITCH_REG1 {
|
|
regulator-name = "vcc_3v3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc3v3_sd: SWITCH_REG2 {
|
|
regulator-name = "vcc3v3_sd";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
};
|
|
};
|
|
|
|
&i2c5 {
|
|
status = "okay";
|
|
|
|
hym8563: rtc@51 {
|
|
compatible = "haoyu,hym8563";
|
|
reg = <0x51>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "rtcic_32kout";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hym8563_int>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&i2s0_8ch {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie30phy {
|
|
data-lanes = <1 2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
hym8563 {
|
|
hym8563_int: hym8563-int {
|
|
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
pmic {
|
|
pmic_int: pmic-int {
|
|
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
vcc5v0_usb_host_en: vcc5v0-usb-host-en {
|
|
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
|
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmu_io_domains {
|
|
pmuio1-supply = <&vcc3v3_pmu>;
|
|
pmuio2-supply = <&vcc3v3_pmu>;
|
|
vccio1-supply = <&vccio_acodec>;
|
|
vccio3-supply = <&vccio_sd>;
|
|
vccio4-supply = <&vcc_1v8>;
|
|
vccio5-supply = <&vcc_3v3>;
|
|
vccio6-supply = <&vcc_1v8>;
|
|
vccio7-supply = <&vcc_3v3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&vcca_1v8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
max-frequency = <200000000>;
|
|
non-removable;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc0 {
|
|
max-frequency = <150000000>;
|
|
no-sdio;
|
|
no-mmc;
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
vmmc-supply = <&vcc3v3_sd>;
|
|
vqmmc-supply = <&vccio_sd>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
|
status = "okay";
|
|
};
|
|
|
|
&tsadc {
|
|
rockchip,hw-tshut-mode = <1>;
|
|
rockchip,hw-tshut-polarity = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_xhci {
|
|
extcon = <&usb2phy0>;
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_xhci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy0_host {
|
|
phy-supply = <&vcc5v0_usb_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy0_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy1_host {
|
|
phy-supply = <&vcc5v0_usb_otg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy1_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop {
|
|
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
|
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
|
status = "okay";
|
|
};
|
|
|
|
&vop_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vp0 {
|
|
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
|
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
|
remote-endpoint = <&hdmi_in_vp0>;
|
|
};
|
|
};
|