Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-27 15:12:21 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/env/sf.c
Masahiro Yamada 9b643e312d treewide: replace with error() with pr_err() 
U-Boot widely uses error() as a bit noisier variant of printf().

This macro causes name conflict with the following line in
include/linux/compiler-gcc.h:

  # define __compiletime_error(message) __attribute__((error(message)))

This prevents us from using __compiletime_error(), and makes it
difficult to fully sync BUILD_BUG macros with Linux.  (Notice
Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().)

Let's convert error() into now treewide-available pr_err().

Done with the help of Coccinelle, excluing tools/ directory.

The semantic patch I used is as follows:

// <smpl>
@@@@
-error
+pr_err
 (...)
// </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Re-run Coccinelle]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-04 11:59:44 -04:00

358 lines
7.5 KiB
C
Raw Blame History

/*
* (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Andreas Heppel <aheppel@sysgo.de>
*
* (C) Copyright 2008 Atmel Corporation
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <environment.h>
#include <malloc.h>
#include <spi.h>
#include <spi_flash.h>
#include <search.h>
#include <errno.h>
#include <dm/device-internal.h>
#ifndef CONFIG_ENV_SPI_BUS
# define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
#endif
#ifndef CONFIG_ENV_SPI_CS
# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
#endif
#ifndef CONFIG_ENV_SPI_MAX_HZ
# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#endif
#ifndef CONFIG_ENV_SPI_MODE
# define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
#endif
#ifndef CONFIG_SPL_BUILD
#define CMD_SAVEENV
#endif
#ifdef CONFIG_ENV_OFFSET_REDUND
#ifdef CMD_SAVEENV
static ulong env_offset = CONFIG_ENV_OFFSET;
static ulong env_new_offset = CONFIG_ENV_OFFSET_REDUND;
#endif
#define ACTIVE_FLAG 1
#define OBSOLETE_FLAG 0
#endif /* CONFIG_ENV_OFFSET_REDUND */
DECLARE_GLOBAL_DATA_PTR;
static struct spi_flash *env_flash;
static int setup_flash_device(void)
{
#ifdef CONFIG_DM_SPI_FLASH
struct udevice *new;
int ret;
/* speed and mode will be read from DT */
ret = spi_flash_probe_bus_cs(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
0, 0, &new);
if (ret) {
set_default_env("!spi_flash_probe_bus_cs() failed");
return ret;
}
env_flash = dev_get_uclass_priv(new);
#else
if (!env_flash) {
env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS,
CONFIG_ENV_SPI_CS,
CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
if (!env_flash) {
set_default_env("!spi_flash_probe() failed");
return -EIO;
}
}
#endif
return 0;
}
#if defined(CONFIG_ENV_OFFSET_REDUND)
#ifdef CMD_SAVEENV
static int env_sf_save(void)
{
env_t env_new;
char *saved_buffer = NULL, flag = OBSOLETE_FLAG;
u32 saved_size, saved_offset, sector;
int ret;
ret = setup_flash_device();
if (ret)
return ret;
ret = env_export(&env_new);
if (ret)
return -EIO;
env_new.flags = ACTIVE_FLAG;
if (gd->env_valid == ENV_VALID) {
env_new_offset = CONFIG_ENV_OFFSET_REDUND;
env_offset = CONFIG_ENV_OFFSET;
} else {
env_new_offset = CONFIG_ENV_OFFSET;
env_offset = CONFIG_ENV_OFFSET_REDUND;
}
/* Is the sector larger than the env (i.e. embedded) */
if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE;
saved_offset = env_new_offset + CONFIG_ENV_SIZE;
saved_buffer = memalign(ARCH_DMA_MINALIGN, saved_size);
if (!saved_buffer) {
ret = -ENOMEM;
goto done;
}
ret = spi_flash_read(env_flash, saved_offset,
saved_size, saved_buffer);
if (ret)
goto done;
}
sector = DIV_ROUND_UP(CONFIG_ENV_SIZE, CONFIG_ENV_SECT_SIZE);
puts("Erasing SPI flash...");
ret = spi_flash_erase(env_flash, env_new_offset,
sector * CONFIG_ENV_SECT_SIZE);
if (ret)
goto done;
puts("Writing to SPI flash...");
ret = spi_flash_write(env_flash, env_new_offset,
CONFIG_ENV_SIZE, &env_new);
if (ret)
goto done;
if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
ret = spi_flash_write(env_flash, saved_offset,
saved_size, saved_buffer);
if (ret)
goto done;
}
ret = spi_flash_write(env_flash, env_offset + offsetof(env_t, flags),
sizeof(env_new.flags), &flag);
if (ret)
goto done;
puts("done\n");
gd->env_valid = gd->env_valid == ENV_REDUND ? ENV_VALID : ENV_REDUND;
printf("Valid environment: %d\n", (int)gd->env_valid);
done:
if (saved_buffer)
free(saved_buffer);
return ret;
}
#endif /* CMD_SAVEENV */
static int env_sf_load(void)
{
int ret;
int crc1_ok = 0, crc2_ok = 0;
env_t *tmp_env1 = NULL;
env_t *tmp_env2 = NULL;
env_t *ep = NULL;
tmp_env1 = (env_t *)memalign(ARCH_DMA_MINALIGN,
CONFIG_ENV_SIZE);
tmp_env2 = (env_t *)memalign(ARCH_DMA_MINALIGN,
CONFIG_ENV_SIZE);
if (!tmp_env1 || !tmp_env2) {
set_default_env("!malloc() failed");
ret = -EIO;
goto out;
}
ret = setup_flash_device();
if (ret)
goto out;
ret = spi_flash_read(env_flash, CONFIG_ENV_OFFSET,
CONFIG_ENV_SIZE, tmp_env1);
if (ret) {
set_default_env("!spi_flash_read() failed");
goto err_read;
}
if (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc)
crc1_ok = 1;
ret = spi_flash_read(env_flash, CONFIG_ENV_OFFSET_REDUND,
CONFIG_ENV_SIZE, tmp_env2);
if (!ret) {
if (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc)
crc2_ok = 1;
}
if (!crc1_ok && !crc2_ok) {
set_default_env("!bad CRC");
ret = -EIO;
goto err_read;
} else if (crc1_ok && !crc2_ok) {
gd->env_valid = ENV_VALID;
} else if (!crc1_ok && crc2_ok) {
gd->env_valid = ENV_REDUND;
} else if (tmp_env1->flags == ACTIVE_FLAG &&
tmp_env2->flags == OBSOLETE_FLAG) {
gd->env_valid = ENV_VALID;
} else if (tmp_env1->flags == OBSOLETE_FLAG &&
tmp_env2->flags == ACTIVE_FLAG) {
gd->env_valid = ENV_REDUND;
} else if (tmp_env1->flags == tmp_env2->flags) {
gd->env_valid = ENV_VALID;
} else if (tmp_env1->flags == 0xFF) {
gd->env_valid = ENV_VALID;
} else if (tmp_env2->flags == 0xFF) {
gd->env_valid = ENV_REDUND;
} else {
/*
* this differs from code in env_flash.c, but I think a sane
* default path is desirable.
*/
gd->env_valid = ENV_VALID;
}
if (gd->env_valid == ENV_VALID)
ep = tmp_env1;
else
ep = tmp_env2;
ret = env_import((char *)ep, 0);
if (!ret) {
pr_err("Cannot import environment: errno = %d\n", errno);
set_default_env("!env_import failed");
}
err_read:
spi_flash_free(env_flash);
env_flash = NULL;
out:
free(tmp_env1);
free(tmp_env2);
return ret;
}
#else
#ifdef CMD_SAVEENV
static int env_sf_save(void)
{
u32 saved_size, saved_offset, sector;
char *saved_buffer = NULL;
int ret = 1;
env_t env_new;
ret = setup_flash_device();
if (ret)
return ret;
/* Is the sector larger than the env (i.e. embedded) */
if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE;
saved_offset = CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE;
saved_buffer = malloc(saved_size);
if (!saved_buffer)
goto done;
ret = spi_flash_read(env_flash, saved_offset,
saved_size, saved_buffer);
if (ret)
goto done;
}
ret = env_export(&env_new);
if (ret)
goto done;
sector = DIV_ROUND_UP(CONFIG_ENV_SIZE, CONFIG_ENV_SECT_SIZE);
puts("Erasing SPI flash...");
ret = spi_flash_erase(env_flash, CONFIG_ENV_OFFSET,
sector * CONFIG_ENV_SECT_SIZE);
if (ret)
goto done;
puts("Writing to SPI flash...");
ret = spi_flash_write(env_flash, CONFIG_ENV_OFFSET,
CONFIG_ENV_SIZE, &env_new);
if (ret)
goto done;
if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
ret = spi_flash_write(env_flash, saved_offset,
saved_size, saved_buffer);
if (ret)
goto done;
}
ret = 0;
puts("done\n");
done:
if (saved_buffer)
free(saved_buffer);
return ret;
}
#endif /* CMD_SAVEENV */
static int env_sf_load(void)
{
int ret;
char *buf = NULL;
buf = (char *)memalign(ARCH_DMA_MINALIGN, CONFIG_ENV_SIZE);
if (!buf) {
set_default_env("!malloc() failed");
return -EIO;
}
ret = setup_flash_device();
if (ret)
goto out;
ret = spi_flash_read(env_flash,
CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, buf);
if (ret) {
set_default_env("!spi_flash_read() failed");
goto err_read;
}
ret = env_import(buf, 1);
if (ret)
gd->env_valid = ENV_VALID;
err_read:
spi_flash_free(env_flash);
env_flash = NULL;
out:
free(buf);
return ret;
}
#endif
U_BOOT_ENV_LOCATION(sf) = {
.location = ENVL_SPI_FLASH,
ENV_NAME("SPI Flash")
.load = env_sf_load,
#ifdef CMD_SAVEENV
.save = env_save_ptr(env_sf_save),
#endif
};
Reference in a new issue View git blame Copy permalink