u-boot/board/ti/dra7xx
Tom Rini b4c4fec300 dra7xx: Move CONS_INDEX to Kconfig and enable CONFIG_SPL_STACK_ADDR
- Move the CONS_INDEX selection out of CONFIG_SYS_EXTRA_OPTIONS and
  into Kconfig proper.
- While in here, enable CONFIG_SPL_STACK_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-12 20:48:07 -04:00
..
evm.c ARM: DRA7: CPSW: Remove IO delay hack 2015-06-12 13:02:06 -04:00
Kconfig dra7xx: Move CONS_INDEX to Kconfig and enable CONFIG_SPL_STACK_ADDR 2015-08-12 20:48:07 -04:00
MAINTAINERS Add board MAINTAINERS files 2014-07-30 08:48:06 -04:00
Makefile board: ti: convert makefiles to Kbuild style 2013-10-31 13:26:44 -04:00
mux_data.h ARM: DRA7-evm: prevent DCAN1 _wait_target_disable failure in kernel 2015-07-08 18:26:42 -04:00
README mmc: Add 'mmc rst-function' sub-command 2014-04-02 13:02:58 +03:00

Summary
=======

This document covers various features of the 'dra7xx_evm' build and some
related uses.

eMMC boot partition use
=======================

It is possible, depending on SYSBOOT configuration to boot from the eMMC
boot partitions using (name depending on documentation referenced)
Alternative Boot operation mode or Boot Sequence Option 1/2.  In this
example we load MLO and u-boot.img from the build into DDR and then use
'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to
set boot0 as the boot device.
U-Boot # setenv autoload no
U-Boot # usb start
U-Boot # dhcp
U-Boot # mmc dev 1 1
U-Boot # tftp ${loadaddr} dra7xx/MLO
U-Boot # mmc write ${loadaddr} 0 100
U-Boot # tftp ${loadaddr} dra7xx/u-boot.img
U-Boot # mmc write ${loadaddr} 300 400
U-Boot # mmc bootbus 1 2 0 2
U-Boot # mmc partconf 1 1 1 0
U-Boot # mmc rst-function 1 1