mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
28d476eada
When apf27_defconfig is built with LTO, linking complains about undefined reference to `nand_boot`. This is because it is referenced from inline assembly. Make it visible. Signed-off-by: Marek Behún <marek.behun@nic.cz>
351 lines
8.6 KiB
C
351 lines
8.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2009
|
|
* Magnus Lilja <lilja.magnus@gmail.com>
|
|
*
|
|
* (C) Copyright 2008
|
|
* Maxim Artamonov, <scn1874 at yandex.ru>
|
|
*
|
|
* (C) Copyright 2006-2008
|
|
* Stefan Roese, DENX Software Engineering, sr at denx.de.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <hang.h>
|
|
#include <nand.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/io.h>
|
|
#include "mxc_nand.h"
|
|
|
|
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
|
|
static struct mxc_nand_regs *const nfc = (void *)NFC_BASE_ADDR;
|
|
#elif defined(MXC_NFC_V3_2)
|
|
static struct mxc_nand_regs *const nfc = (void *)NFC_BASE_ADDR_AXI;
|
|
static struct mxc_nand_ip_regs *const nfc_ip = (void *)NFC_BASE_ADDR;
|
|
#endif
|
|
|
|
static void nfc_wait_ready(void)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
|
|
while (!(readnfc(&nfc->config2) & NFC_V1_V2_CONFIG2_INT))
|
|
;
|
|
|
|
/* Reset interrupt flag */
|
|
tmp = readnfc(&nfc->config2);
|
|
tmp &= ~NFC_V1_V2_CONFIG2_INT;
|
|
writenfc(tmp, &nfc->config2);
|
|
#elif defined(MXC_NFC_V3_2)
|
|
while (!(readnfc(&nfc_ip->ipc) & NFC_V3_IPC_INT))
|
|
;
|
|
|
|
/* Reset interrupt flag */
|
|
tmp = readnfc(&nfc_ip->ipc);
|
|
tmp &= ~NFC_V3_IPC_INT;
|
|
writenfc(tmp, &nfc_ip->ipc);
|
|
#endif
|
|
}
|
|
|
|
static void nfc_nand_init(void)
|
|
{
|
|
#if defined(MXC_NFC_V3_2)
|
|
int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
|
|
int tmp;
|
|
|
|
tmp = (readnfc(&nfc_ip->config2) & ~(NFC_V3_CONFIG2_SPAS_MASK |
|
|
NFC_V3_CONFIG2_EDC_MASK | NFC_V3_CONFIG2_PS_MASK)) |
|
|
NFC_V3_CONFIG2_SPAS(CONFIG_SYS_NAND_OOBSIZE / 2) |
|
|
NFC_V3_CONFIG2_INT_MSK | NFC_V3_CONFIG2_ECC_EN |
|
|
NFC_V3_CONFIG2_ONE_CYCLE;
|
|
if (CONFIG_SYS_NAND_PAGE_SIZE == 4096)
|
|
tmp |= NFC_V3_CONFIG2_PS_4096;
|
|
else if (CONFIG_SYS_NAND_PAGE_SIZE == 2048)
|
|
tmp |= NFC_V3_CONFIG2_PS_2048;
|
|
else if (CONFIG_SYS_NAND_PAGE_SIZE == 512)
|
|
tmp |= NFC_V3_CONFIG2_PS_512;
|
|
/*
|
|
* if spare size is larger that 16 bytes per 512 byte hunk
|
|
* then use 8 symbol correction instead of 4
|
|
*/
|
|
if (CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16)
|
|
tmp |= NFC_V3_CONFIG2_ECC_MODE_8;
|
|
else
|
|
tmp &= ~NFC_V3_CONFIG2_ECC_MODE_8;
|
|
writenfc(tmp, &nfc_ip->config2);
|
|
|
|
tmp = NFC_V3_CONFIG3_NUM_OF_DEVS(0) |
|
|
NFC_V3_CONFIG3_NO_SDMA |
|
|
NFC_V3_CONFIG3_RBB_MODE |
|
|
NFC_V3_CONFIG3_SBB(6) | /* Reset default */
|
|
NFC_V3_CONFIG3_ADD_OP(0);
|
|
#ifndef CONFIG_SYS_NAND_BUSWIDTH_16
|
|
tmp |= NFC_V3_CONFIG3_FW8;
|
|
#endif
|
|
writenfc(tmp, &nfc_ip->config3);
|
|
|
|
writenfc(0, &nfc_ip->delay_line);
|
|
#elif defined(MXC_NFC_V2_1)
|
|
int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
|
|
int config1;
|
|
|
|
writenfc(CONFIG_SYS_NAND_OOBSIZE / 2, &nfc->spare_area_size);
|
|
|
|
/* unlocking RAM Buff */
|
|
writenfc(0x2, &nfc->config);
|
|
|
|
/* hardware ECC checking and correct */
|
|
config1 = readnfc(&nfc->config1) | NFC_V1_V2_CONFIG1_ECC_EN |
|
|
NFC_V1_V2_CONFIG1_INT_MSK | NFC_V2_CONFIG1_ONE_CYCLE |
|
|
NFC_V2_CONFIG1_FP_INT;
|
|
/*
|
|
* if spare size is larger that 16 bytes per 512 byte hunk
|
|
* then use 8 symbol correction instead of 4
|
|
*/
|
|
if (CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16)
|
|
config1 &= ~NFC_V2_CONFIG1_ECC_MODE_4;
|
|
else
|
|
config1 |= NFC_V2_CONFIG1_ECC_MODE_4;
|
|
writenfc(config1, &nfc->config1);
|
|
#elif defined(MXC_NFC_V1)
|
|
/* unlocking RAM Buff */
|
|
writenfc(0x2, &nfc->config);
|
|
|
|
/* hardware ECC checking and correct */
|
|
writenfc(NFC_V1_V2_CONFIG1_ECC_EN | NFC_V1_V2_CONFIG1_INT_MSK,
|
|
&nfc->config1);
|
|
#endif
|
|
}
|
|
|
|
static void nfc_nand_command(unsigned short command)
|
|
{
|
|
writenfc(command, &nfc->flash_cmd);
|
|
writenfc(NFC_CMD, &nfc->operation);
|
|
nfc_wait_ready();
|
|
}
|
|
|
|
static void nfc_nand_address(unsigned short address)
|
|
{
|
|
writenfc(address, &nfc->flash_addr);
|
|
writenfc(NFC_ADDR, &nfc->operation);
|
|
nfc_wait_ready();
|
|
}
|
|
|
|
static void nfc_nand_page_address(unsigned int page_address)
|
|
{
|
|
unsigned int page_count;
|
|
|
|
nfc_nand_address(0x00);
|
|
|
|
/* code only for large page flash */
|
|
if (CONFIG_SYS_NAND_PAGE_SIZE > 512)
|
|
nfc_nand_address(0x00);
|
|
|
|
page_count = CONFIG_SYS_NAND_SIZE / CONFIG_SYS_NAND_PAGE_SIZE;
|
|
|
|
if (page_address <= page_count) {
|
|
page_count--; /* transform 0x01000000 to 0x00ffffff */
|
|
do {
|
|
nfc_nand_address(page_address & 0xff);
|
|
page_address = page_address >> 8;
|
|
page_count = page_count >> 8;
|
|
} while (page_count);
|
|
}
|
|
|
|
nfc_nand_address(0x00);
|
|
}
|
|
|
|
static void nfc_nand_data_output(void)
|
|
{
|
|
#ifdef NAND_MXC_2K_MULTI_CYCLE
|
|
int i;
|
|
#endif
|
|
|
|
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
|
|
writenfc(0, &nfc->buf_addr);
|
|
#elif defined(MXC_NFC_V3_2)
|
|
int config1 = readnfc(&nfc->config1);
|
|
config1 &= ~NFC_V3_CONFIG1_RBA_MASK;
|
|
writenfc(config1, &nfc->config1);
|
|
#endif
|
|
writenfc(NFC_OUTPUT, &nfc->operation);
|
|
nfc_wait_ready();
|
|
#ifdef NAND_MXC_2K_MULTI_CYCLE
|
|
/*
|
|
* This NAND controller requires multiple input commands
|
|
* for pages larger than 512 bytes.
|
|
*/
|
|
for (i = 1; i < CONFIG_SYS_NAND_PAGE_SIZE / 512; i++) {
|
|
writenfc(i, &nfc->buf_addr);
|
|
writenfc(NFC_OUTPUT, &nfc->operation);
|
|
nfc_wait_ready();
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static int nfc_nand_check_ecc(void)
|
|
{
|
|
#if defined(MXC_NFC_V1)
|
|
u16 ecc_status = readw(&nfc->ecc_status_result);
|
|
return (ecc_status & 0x3) == 2 || (ecc_status >> 2) == 2;
|
|
#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
|
|
u32 ecc_status = readl(&nfc->ecc_status_result);
|
|
int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
|
|
int err_limit = CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16 ? 8 : 4;
|
|
int subpages = CONFIG_SYS_NAND_PAGE_SIZE / 512;
|
|
|
|
do {
|
|
if ((ecc_status & 0xf) > err_limit)
|
|
return 1;
|
|
ecc_status >>= 4;
|
|
} while (--subpages);
|
|
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
static void nfc_nand_read_page(unsigned int page_address)
|
|
{
|
|
/* read in first 0 buffer */
|
|
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
|
|
writenfc(0, &nfc->buf_addr);
|
|
#elif defined(MXC_NFC_V3_2)
|
|
int config1 = readnfc(&nfc->config1);
|
|
config1 &= ~NFC_V3_CONFIG1_RBA_MASK;
|
|
writenfc(config1, &nfc->config1);
|
|
#endif
|
|
nfc_nand_command(NAND_CMD_READ0);
|
|
nfc_nand_page_address(page_address);
|
|
|
|
if (CONFIG_SYS_NAND_PAGE_SIZE > 512)
|
|
nfc_nand_command(NAND_CMD_READSTART);
|
|
|
|
nfc_nand_data_output(); /* fill the main buffer 0 */
|
|
}
|
|
|
|
static int nfc_read_page(unsigned int page_address, unsigned char *buf)
|
|
{
|
|
int i;
|
|
u32 *src;
|
|
u32 *dst;
|
|
|
|
nfc_nand_read_page(page_address);
|
|
|
|
if (nfc_nand_check_ecc())
|
|
return -EBADMSG;
|
|
|
|
src = (u32 *)&nfc->main_area[0][0];
|
|
dst = (u32 *)buf;
|
|
|
|
/* main copy loop from NAND-buffer to SDRAM memory */
|
|
for (i = 0; i < CONFIG_SYS_NAND_PAGE_SIZE / 4; i++) {
|
|
writel(readl(src), dst);
|
|
src++;
|
|
dst++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int is_badblock(int pagenumber)
|
|
{
|
|
int page = pagenumber;
|
|
u32 badblock;
|
|
u32 *src;
|
|
|
|
/* Check the first two pages for bad block markers */
|
|
for (page = pagenumber; page < pagenumber + 2; page++) {
|
|
nfc_nand_read_page(page);
|
|
|
|
src = (u32 *)&nfc->spare_area[0][0];
|
|
|
|
/*
|
|
* IMPORTANT NOTE: The nand flash controller uses a non-
|
|
* standard layout for large page devices. This can
|
|
* affect the position of the bad block marker.
|
|
*/
|
|
/* Get the bad block marker */
|
|
badblock = readl(&src[CONFIG_SYS_NAND_BAD_BLOCK_POS / 4]);
|
|
badblock >>= 8 * (CONFIG_SYS_NAND_BAD_BLOCK_POS % 4);
|
|
badblock &= 0xff;
|
|
|
|
/* bad block marker verify */
|
|
if (badblock != 0xff)
|
|
return 1; /* potential bad block */
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int nand_spl_load_image(uint32_t from, unsigned int size, void *buf)
|
|
{
|
|
int i;
|
|
unsigned int page;
|
|
unsigned int maxpages = CONFIG_SYS_NAND_SIZE /
|
|
CONFIG_SYS_NAND_PAGE_SIZE;
|
|
|
|
nfc_nand_init();
|
|
|
|
/* Convert to page number */
|
|
page = from / CONFIG_SYS_NAND_PAGE_SIZE;
|
|
i = 0;
|
|
|
|
size = roundup(size, CONFIG_SYS_NAND_PAGE_SIZE);
|
|
while (i < size / CONFIG_SYS_NAND_PAGE_SIZE) {
|
|
if (nfc_read_page(page, buf) < 0)
|
|
return -1;
|
|
|
|
page++;
|
|
i++;
|
|
buf = buf + CONFIG_SYS_NAND_PAGE_SIZE;
|
|
|
|
/*
|
|
* Check if we have crossed a block boundary, and if so
|
|
* check for bad block.
|
|
*/
|
|
if (!(page % CONFIG_SYS_NAND_PAGE_COUNT)) {
|
|
/*
|
|
* Yes, new block. See if this block is good. If not,
|
|
* loop until we find a good block.
|
|
*/
|
|
while (is_badblock(page)) {
|
|
page = page + CONFIG_SYS_NAND_PAGE_COUNT;
|
|
/* Check i we've reached the end of flash. */
|
|
if (page >= maxpages)
|
|
return -1;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_SPL_FRAMEWORK
|
|
/*
|
|
* The main entry for NAND booting. It's necessary that SDRAM is already
|
|
* configured and available since this code loads the main U-Boot image
|
|
* from NAND into SDRAM and starts it from there.
|
|
*/
|
|
__used void nand_boot(void)
|
|
{
|
|
__attribute__((noreturn)) void (*uboot)(void);
|
|
|
|
/*
|
|
* CONFIG_SYS_NAND_U_BOOT_OFFS and CONFIG_SYS_NAND_U_BOOT_SIZE must
|
|
* be aligned to full pages
|
|
*/
|
|
if (!nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
|
|
CONFIG_SYS_NAND_U_BOOT_SIZE,
|
|
(uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) {
|
|
/* Copy from NAND successful, start U-Boot */
|
|
uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
|
|
uboot();
|
|
} else {
|
|
/* Unrecoverable error when copying from NAND */
|
|
hang();
|
|
}
|
|
}
|
|
#endif
|
|
|
|
void nand_init(void) {}
|
|
void nand_deselect(void) {}
|