mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-10 13:23:09 +00:00
b12dc5d6fa
This driver supports Rockchip NFC (NAND Flash Controller) found on RK3308, RK2928, RKPX30, RV1108 and other SOCs. The driver has been tested using 8-bit NAND interface on the ARM based RK3308 platform. Support Rockchip SoCs and NFC versions: - PX30 and RK3326(NFCv900). ECC: 16/40/60/70 bits/1KB. CLOCK: ahb and nfc. - RK3308 and RV1108(NFCv800). ECC: 16 bits/1KB. CLOCK: ahb and nfc. - RK3036 and RK3128(NFCv622). ECC: 16/24/40/60 bits/1KB. CLOCK: ahb and nfc. - RK3066, RK3188 and RK2928(NFCv600). ECC: 16/24/40/60 bits/1KB. CLOCK: ahb. Supported features: - Read full page data by DMA. - Support HW ECC(one step is 1KB). - Support 2 - 32K page size. - Support 8 CS(depend on SoCs) Limitations: - No support for the ecc step size is 512. - Untested on some SoCs. - No support for subpages. - No support for the builtin randomizer. - The original bad block mask is not supported. It is recommended to use the BBT(bad block table). Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
83 lines
2.5 KiB
Makefile
83 lines
2.5 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
# (C) Copyright 2006
|
|
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
|
|
ifdef CONFIG_SPL_BUILD
|
|
|
|
ifdef CONFIG_SPL_NAND_DRIVERS
|
|
NORMAL_DRIVERS=y
|
|
endif
|
|
|
|
obj-$(CONFIG_SPL_NAND_AM33XX_BCH) += am335x_spl_bch.o
|
|
obj-$(CONFIG_SPL_NAND_DENALI) += denali_spl.o
|
|
obj-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o
|
|
obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
|
|
obj-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o
|
|
obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o
|
|
obj-$(CONFIG_SPL_NAND_IDENT) += nand_ids.o nand_timings.o
|
|
obj-$(CONFIG_SPL_NAND_INIT) += nand.o
|
|
ifeq ($(CONFIG_SPL_ENV_SUPPORT),y)
|
|
obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o
|
|
endif
|
|
|
|
else # not spl
|
|
|
|
NORMAL_DRIVERS=y
|
|
|
|
obj-y += nand.o
|
|
obj-y += nand_bbt.o
|
|
obj-y += nand_ids.o
|
|
obj-y += nand_util.o
|
|
obj-y += nand_ecc.o
|
|
obj-y += nand_base.o
|
|
obj-y += nand_timings.o
|
|
|
|
endif # not spl
|
|
|
|
ifdef NORMAL_DRIVERS
|
|
|
|
obj-$(CONFIG_NAND_ECC_BCH) += nand_bch.o
|
|
|
|
obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o
|
|
obj-$(CONFIG_NAND_ARASAN) += arasan_nfc.o
|
|
obj-$(CONFIG_NAND_BRCMNAND) += brcmnand/
|
|
obj-$(CONFIG_NAND_DAVINCI) += davinci_nand.o
|
|
obj-$(CONFIG_NAND_DENALI) += denali.o
|
|
obj-$(CONFIG_NAND_DENALI_DT) += denali_dt.o
|
|
obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
|
|
obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o
|
|
obj-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
|
|
obj-$(CONFIG_NAND_FSMC) += fsmc_nand.o
|
|
obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o
|
|
obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
|
|
obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
|
|
obj-$(CONFIG_NAND_LPC32XX_MLC) += lpc32xx_nand_mlc.o
|
|
obj-$(CONFIG_NAND_LPC32XX_SLC) += lpc32xx_nand_slc.o
|
|
obj-$(CONFIG_NAND_VF610_NFC) += vf610_nfc.o
|
|
obj-$(CONFIG_NAND_MXC) += mxc_nand.o
|
|
obj-$(CONFIG_NAND_MXS) += mxs_nand.o
|
|
obj-$(CONFIG_NAND_MXS_DT) += mxs_nand_dt.o
|
|
obj-$(CONFIG_NAND_OCTEONTX) += octeontx_nand.o
|
|
obj-$(CONFIG_NAND_OCTEONTX_HW_ECC) += octeontx_bch.o
|
|
obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o
|
|
obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
|
|
obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
|
|
obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
|
|
obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o
|
|
obj-$(CONFIG_NAND_PLAT) += nand_plat.o
|
|
obj-$(CONFIG_NAND_SUNXI) += sunxi_nand.o
|
|
obj-$(CONFIG_NAND_ZYNQ) += zynq_nand.o
|
|
obj-$(CONFIG_NAND_STM32_FMC2) += stm32_fmc2_nand.o
|
|
obj-$(CONFIG_CORTINA_NAND) += cortina_nand.o
|
|
obj-$(CONFIG_ROCKCHIP_NAND) += rockchip_nfc.o
|
|
|
|
else # minimal SPL drivers
|
|
|
|
obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
|
|
obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_spl.o
|
|
obj-$(CONFIG_NAND_MXC) += mxc_nand_spl.o
|
|
obj-$(CONFIG_NAND_MXS) += mxs_nand_spl.o mxs_nand.o
|
|
obj-$(CONFIG_NAND_SUNXI) += sunxi_nand_spl.o
|
|
|
|
endif # drivers
|