u-boot/arch/arm/cpu/armv8/fsl-layerscape/soc.c
Prabhakar Kushwaha 49cdce1635 armv8: fsl-layerscape: Append "A" in SoC name for ARM based SoCs
Freescale ARMv8 SoC name ends with "A" to represent ARM SoCs.
like LS2080A, LS1043A, LS1012A.

So append "A" to SoC names.

Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-28 12:08:53 -07:00

343 lines
8.1 KiB
C

/*
* Copyright 2014-2015 Freescale Semiconductor
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <fsl_ifc.h>
#include <ahci.h>
#include <scsi.h>
#include <asm/arch/soc.h>
#include <asm/io.h>
#include <asm/global_data.h>
#include <asm/arch-fsl-layerscape/config.h>
#ifdef CONFIG_SYS_FSL_DDR
#include <fsl_ddr_sdram.h>
#include <fsl_ddr.h>
#endif
#ifdef CONFIG_CHAIN_OF_TRUST
#include <fsl_validate.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
bool soc_has_dp_ddr(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 svr = gur_in32(&gur->svr);
/* LS2085A has DP_DDR */
if (SVR_SOC_VER(svr) == SVR_LS2085A)
return true;
return false;
}
bool soc_has_aiop(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 svr = gur_in32(&gur->svr);
/* LS2085A has AIOP */
if (SVR_SOC_VER(svr) == SVR_LS2085A)
return true;
return false;
}
#ifdef CONFIG_LS2080A
/*
* This erratum requires setting a value to eddrtqcr1 to
* optimal the DDR performance.
*/
static void erratum_a008336(void)
{
u32 *eddrtqcr1;
#ifdef CONFIG_SYS_FSL_ERRATUM_A008336
#ifdef CONFIG_SYS_FSL_DCSR_DDR_ADDR
eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR_ADDR + 0x800;
out_le32(eddrtqcr1, 0x63b30002);
#endif
#ifdef CONFIG_SYS_FSL_DCSR_DDR2_ADDR
eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR2_ADDR + 0x800;
out_le32(eddrtqcr1, 0x63b30002);
#endif
#endif
}
/*
* This erratum requires a register write before being Memory
* controller 3 being enabled.
*/
static void erratum_a008514(void)
{
u32 *eddrtqcr1;
#ifdef CONFIG_SYS_FSL_ERRATUM_A008514
#ifdef CONFIG_SYS_FSL_DCSR_DDR3_ADDR
eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR3_ADDR + 0x800;
out_le32(eddrtqcr1, 0x63b20002);
#endif
#endif
}
#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
#define PLATFORM_CYCLE_ENV_VAR "a009635_interval_val"
static unsigned long get_internval_val_mhz(void)
{
char *interval = getenv(PLATFORM_CYCLE_ENV_VAR);
/*
* interval is the number of platform cycles(MHz) between
* wake up events generated by EPU.
*/
ulong interval_mhz = get_bus_freq(0) / (1000 * 1000);
if (interval)
interval_mhz = simple_strtoul(interval, NULL, 10);
return interval_mhz;
}
void erratum_a009635(void)
{
u32 val;
unsigned long interval_mhz = get_internval_val_mhz();
if (!interval_mhz)
return;
val = in_le32(DCSR_CGACRE5);
writel(val | 0x00000200, DCSR_CGACRE5);
val = in_le32(EPU_EPCMPR5);
writel(interval_mhz, EPU_EPCMPR5);
val = in_le32(EPU_EPCCR5);
writel(val | 0x82820000, EPU_EPCCR5);
val = in_le32(EPU_EPSMCR5);
writel(val | 0x002f0000, EPU_EPSMCR5);
val = in_le32(EPU_EPECR5);
writel(val | 0x20000000, EPU_EPECR5);
val = in_le32(EPU_EPGCR);
writel(val | 0x80000000, EPU_EPGCR);
}
#endif /* CONFIG_SYS_FSL_ERRATUM_A009635 */
static void erratum_rcw_src(void)
{
#if defined(CONFIG_SPL)
u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
u32 __iomem *dcfg_dcsr = (u32 __iomem *)DCFG_DCSR_BASE;
u32 val;
val = in_le32(dcfg_ccsr + DCFG_PORSR1 / 4);
val &= ~DCFG_PORSR1_RCW_SRC;
val |= DCFG_PORSR1_RCW_SRC_NOR;
out_le32(dcfg_dcsr + DCFG_DCSR_PORCR1 / 4, val);
#endif
}
#define I2C_DEBUG_REG 0x6
#define I2C_GLITCH_EN 0x8
/*
* This erratum requires setting glitch_en bit to enable
* digital glitch filter to improve clock stability.
*/
static void erratum_a009203(void)
{
u8 __iomem *ptr;
#ifdef CONFIG_SYS_I2C
#ifdef I2C1_BASE_ADDR
ptr = (u8 __iomem *)(I2C1_BASE_ADDR + I2C_DEBUG_REG);
writeb(I2C_GLITCH_EN, ptr);
#endif
#ifdef I2C2_BASE_ADDR
ptr = (u8 __iomem *)(I2C2_BASE_ADDR + I2C_DEBUG_REG);
writeb(I2C_GLITCH_EN, ptr);
#endif
#ifdef I2C3_BASE_ADDR
ptr = (u8 __iomem *)(I2C3_BASE_ADDR + I2C_DEBUG_REG);
writeb(I2C_GLITCH_EN, ptr);
#endif
#ifdef I2C4_BASE_ADDR
ptr = (u8 __iomem *)(I2C4_BASE_ADDR + I2C_DEBUG_REG);
writeb(I2C_GLITCH_EN, ptr);
#endif
#endif
}
void bypass_smmu(void)
{
u32 val;
val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
out_le32(SMMU_SCR0, val);
val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
out_le32(SMMU_NSCR0, val);
}
void fsl_lsch3_early_init_f(void)
{
erratum_rcw_src();
init_early_memctl_regs(); /* tighten IFC timing */
erratum_a009203();
erratum_a008514();
erratum_a008336();
#ifdef CONFIG_CHAIN_OF_TRUST
/* In case of Secure Boot, the IBR configures the SMMU
* to allow only Secure transactions.
* SMMU must be reset in bypass mode.
* Set the ClientPD bit and Clear the USFCFG Bit
*/
if (fsl_check_boot_mode_secure() == 1)
bypass_smmu();
#endif
}
#ifdef CONFIG_SCSI_AHCI_PLAT
int sata_init(void)
{
struct ccsr_ahci __iomem *ccsr_ahci;
ccsr_ahci = (void *)CONFIG_SYS_SATA2;
out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
ccsr_ahci = (void *)CONFIG_SYS_SATA1;
out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
ahci_init((void __iomem *)CONFIG_SYS_SATA1);
scsi_scan(0);
return 0;
}
#endif
#elif defined(CONFIG_FSL_LSCH2)
#ifdef CONFIG_SCSI_AHCI_PLAT
int sata_init(void)
{
struct ccsr_ahci __iomem *ccsr_ahci = (void *)CONFIG_SYS_SATA;
out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY_2_CFG);
out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY_3_CFG);
out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
ahci_init((void __iomem *)CONFIG_SYS_SATA);
scsi_scan(0);
return 0;
}
#endif
static void erratum_a009929(void)
{
#ifdef CONFIG_SYS_FSL_ERRATUM_A009929
struct ccsr_gur *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
u32 __iomem *dcsr_cop_ccp = (void *)CONFIG_SYS_DCSR_COP_CCP_ADDR;
u32 rstrqmr1 = gur_in32(&gur->rstrqmr1);
rstrqmr1 |= 0x00000400;
gur_out32(&gur->rstrqmr1, rstrqmr1);
writel(0x01000000, dcsr_cop_ccp);
#endif
}
/*
* This erratum requires setting a value to eddrtqcr1 to optimal
* the DDR performance. The eddrtqcr1 register is in SCFG space
* of LS1043A and the offset is 0x157_020c.
*/
#if defined(CONFIG_SYS_FSL_ERRATUM_A009660) \
&& defined(CONFIG_SYS_FSL_ERRATUM_A008514)
#error A009660 and A008514 can not be both enabled.
#endif
static void erratum_a009660(void)
{
#ifdef CONFIG_SYS_FSL_ERRATUM_A009660
u32 *eddrtqcr1 = (void *)CONFIG_SYS_FSL_SCFG_ADDR + 0x20c;
out_be32(eddrtqcr1, 0x63b20042);
#endif
}
static void erratum_a008850_early(void)
{
#ifdef CONFIG_SYS_FSL_ERRATUM_A008850
/* part 1 of 2 */
struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR;
struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
/* disables propagation of barrier transactions to DDRC from CCI400 */
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
/* disable the re-ordering in DDRC */
ddr_out32(&ddr->eor, DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS);
#endif
}
void erratum_a008850_post(void)
{
#ifdef CONFIG_SYS_FSL_ERRATUM_A008850
/* part 2 of 2 */
struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR;
struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
u32 tmp;
/* enable propagation of barrier transactions to DDRC from CCI400 */
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
/* enable the re-ordering in DDRC */
tmp = ddr_in32(&ddr->eor);
tmp &= ~(DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS);
ddr_out32(&ddr->eor, tmp);
#endif
}
void fsl_lsch2_early_init_f(void)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
#ifdef CONFIG_FSL_IFC
init_early_memctl_regs(); /* tighten IFC timing */
#endif
#if defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT)
out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
#endif
/* Make SEC reads and writes snoopable */
setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP |
SCFG_SNPCNFGCR_SECWRSNP);
/*
* Enable snoop requests and DVM message requests for
* Slave insterface S4 (A53 core cluster)
*/
out_le32(&cci->slave[4].snoop_ctrl,
CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
/* Erratum */
erratum_a008850_early(); /* part 1 of 2 */
erratum_a009929();
erratum_a009660();
}
#endif
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
#ifdef CONFIG_SCSI_AHCI_PLAT
sata_init();
#endif
#ifdef CONFIG_CHAIN_OF_TRUST
fsl_setenv_chain_of_trust();
#endif
return 0;
}
#endif