u-boot/include/configs/ten64.h
Tom Rini eb8eb31749 configs: Re-run migrations
As the CI test for stopping platforms from being merged that were
defining symbols that had Kconfig entries, a small number of symbols
needed to be migrated again.  Do so, and catch two cases the README
should also have been updated but was not.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 08:43:25 -04:00

54 lines
1.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2017 NXP
* Copyright 2019-2021 Traverse Technologies
*/
#ifndef __TEN64_H
#define __TEN64_H
#include "ls1088a_common.h"
#define COUNTER_FREQUENCY 25000000 /* 25MHz */
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd"
#define SD_BOOTCOMMAND "run distro_bootcmd"
#define QSPI_MC_INIT_CMD \
"sf probe 0:0 && sf read 0x80000000 0x300000 0x200000 &&" \
"sf read 0x80200000 0x5C0000 0x40000 &&" \
"fsl_mc start mc 0x80000000 0x80200000 && " \
"sf read 0x80300000 0x580000 0x40000 && fsl_mc lazyapply DPL 0x80300000\0"
#define SD_MC_INIT_CMD \
"mmcinfo; fatload mmc 0 0x80000000 mcfirmware/mc_ls1088a.itb; "\
"fatload mmc 0 0x80200000 dpaa2config/dpc.0x1D-0x0D.dtb; "\
"fsl_mc start mc 0x80000000 0x80200000\0"
#define BOOT_TARGET_DEVICES(func) \
func(NVME, nvme, 0) \
func(USB, usb, 0) \
func(MMC, mmc, 0) \
func(SCSI, scsi, 0) \
func(DHCP, dhcp, 0) \
func(PXE, pxe, 0)
#include <config_distro_bootcmd.h>
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"BOARD=ten64\0" \
"fdt_addr_r=0x90000000\0" \
"fdt_high=0xa0000000\0" \
"kernel_addr_r=0x81000000\0" \
"load_addr=0xa0000000\0" \
BOOTENV \
"load_efi_dtb=mtd read devicetree $fdt_addr_r && fdt addr $fdt_addr_r && " \
"fdt resize && fdt boardsetup\0" \
"bootcmd_recovery=mtd read recovery 0xa0000000; mtd read dpl 0x80100000 && " \
"fsl_mc apply DPL 0x80100000 && bootm 0xa0000000#ten64\0"
#endif /* __TEN64_H */