mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 09:30:10 +00:00
21755161b2
The micro SD card slot uses GPIO3_13 as card detect pin, so describe it in the devicetree. This was noticed when converting imx53-qsb board to driver model in U-Boot as the micro SD card was not getting detected. After this change it is possible to load the dtb and zImage from the SD card and boot Linux. Signed-off-by: Fabio Estevam <festevam@gmail.com>
387 lines
8.3 KiB
Text
387 lines
8.3 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// Copyright 2011 Freescale Semiconductor, Inc.
|
|
// Copyright 2011 Linaro Ltd.
|
|
|
|
#include "imx53.dtsi"
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = &uart1;
|
|
};
|
|
|
|
memory@70000000 {
|
|
device_type = "memory";
|
|
reg = <0x70000000 0x20000000>,
|
|
<0xb0000000 0x20000000>;
|
|
};
|
|
|
|
display0: disp0 {
|
|
compatible = "fsl,imx-parallel-display";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ipu_disp0>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
display0_in: endpoint {
|
|
remote-endpoint = <&ipu_di0_disp0>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
display_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
power {
|
|
label = "Power Button";
|
|
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_POWER>;
|
|
};
|
|
|
|
volume-up {
|
|
label = "Volume Up";
|
|
gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
wakeup-source;
|
|
};
|
|
|
|
volume-down {
|
|
label = "Volume Down";
|
|
gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&led_pin_gpio7_7>;
|
|
|
|
user {
|
|
label = "Heartbeat";
|
|
gpios = <&gpio7 7 0>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
panel {
|
|
compatible = "sii,43wvf1g";
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&display_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reg_3p2v: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "3P2V";
|
|
regulator-min-microvolt = <3200000>;
|
|
regulator-max-microvolt = <3200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_usb_vbus: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "usb_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio7 8 0>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "fsl,imx53-qsb-sgtl5000",
|
|
"fsl,imx-audio-sgtl5000";
|
|
model = "imx53-qsb-sgtl5000";
|
|
ssi-controller = <&ssi2>;
|
|
audio-codec = <&sgtl5000>;
|
|
audio-routing =
|
|
"MIC_IN", "Mic Jack",
|
|
"Mic Jack", "Mic Bias",
|
|
"Headphone Jack", "HP_OUT";
|
|
mux-int-port = <2>;
|
|
mux-ext-port = <5>;
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
|
|
operating-points = <
|
|
/* kHz uV */
|
|
166666 850000
|
|
400000 900000
|
|
800000 1050000
|
|
1000000 1200000
|
|
>;
|
|
};
|
|
|
|
&esdhc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esdhc1>;
|
|
cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ipu_di0_disp0 {
|
|
remote-endpoint = <&display0_in>;
|
|
};
|
|
|
|
&ssi2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&esdhc3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esdhc3>;
|
|
cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
|
|
wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
|
|
bus-width = <8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
imx53-qsb {
|
|
pinctrl_hog: hoggrp {
|
|
fsl,pins = <
|
|
MX53_PAD_GPIO_8__GPIO1_8 0x80000000
|
|
MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
|
|
MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
|
|
MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
|
|
MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
|
|
MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
|
|
MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
|
|
MX53_PAD_GPIO_16__GPIO7_11 0x80000000
|
|
>;
|
|
};
|
|
|
|
led_pin_gpio7_7: led_gpio7_7 {
|
|
fsl,pins = <
|
|
MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_audmux: audmuxgrp {
|
|
fsl,pins = <
|
|
MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000
|
|
MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000
|
|
MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
|
|
MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_codec: codecgrp {
|
|
fsl,pins = <
|
|
MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
|
|
>;
|
|
};
|
|
|
|
pinctrl_esdhc1: esdhc1grp {
|
|
fsl,pins = <
|
|
MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
|
|
MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
|
|
MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
|
|
MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
|
|
MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
|
|
MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
|
|
MX53_PAD_EIM_DA13__GPIO3_13 0xe4
|
|
>;
|
|
};
|
|
|
|
pinctrl_esdhc3: esdhc3grp {
|
|
fsl,pins = <
|
|
MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5
|
|
MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5
|
|
MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
|
|
MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
|
|
MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5
|
|
MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5
|
|
MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5
|
|
MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5
|
|
MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
|
|
MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5
|
|
>;
|
|
};
|
|
|
|
pinctrl_fec: fecgrp {
|
|
fsl,pins = <
|
|
MX53_PAD_FEC_MDC__FEC_MDC 0x4
|
|
MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc
|
|
MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180
|
|
MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180
|
|
MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180
|
|
MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180
|
|
MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180
|
|
MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4
|
|
MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4
|
|
MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4
|
|
>;
|
|
};
|
|
|
|
/* open drain */
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec
|
|
MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
|
|
MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_ipu_disp0: ipudisp0grp {
|
|
fsl,pins = <
|
|
MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5
|
|
MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5
|
|
MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5
|
|
MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5
|
|
MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5
|
|
MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5
|
|
MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5
|
|
MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5
|
|
MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5
|
|
MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5
|
|
MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5
|
|
MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5
|
|
MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5
|
|
MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5
|
|
MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5
|
|
MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5
|
|
MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5
|
|
MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5
|
|
MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5
|
|
MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5
|
|
MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5
|
|
MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5
|
|
MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5
|
|
MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5
|
|
MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5
|
|
MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5
|
|
MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5
|
|
MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5
|
|
>;
|
|
};
|
|
|
|
pinctrl_vga_sync: vgasync-grp {
|
|
fsl,pins = <
|
|
/* VGA_HSYNC, VSYNC with max drive strength */
|
|
MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
|
|
MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
|
|
MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&tve {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_vga_sync>;
|
|
ddc-i2c-bus = <&i2c2>;
|
|
fsl,tve-mode = "vga";
|
|
fsl,hsync-pin = <7>; /* IPU DI1 PIN7 via EIM_OE */
|
|
fsl,vsync-pin = <8>; /* IPU DI1 PIN8 via EIM_RW */
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
|
|
sgtl5000: codec@a {
|
|
compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_codec>;
|
|
#sound-dai-cells = <0>;
|
|
VDDA-supply = <®_3p2v>;
|
|
VDDIO-supply = <®_3p2v>;
|
|
clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
accelerometer: mma8450@1c {
|
|
compatible = "fsl,mma8450";
|
|
reg = <0x1c>;
|
|
};
|
|
};
|
|
|
|
&audmux {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_audmux>;
|
|
status = "okay";
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec>;
|
|
phy-mode = "rmii";
|
|
phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sata {
|
|
status = "okay";
|
|
};
|
|
|
|
&vpu {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
vbus-supply = <®_usb_vbus>;
|
|
phy_type = "utmi";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
dr_mode = "peripheral";
|
|
status = "okay";
|
|
};
|