u-boot/drivers/mmc/tegra_mmc.c
Stephen Warren eb3f68afbc ARM: tegra: fix Tegra186 SDHCI clock/reset names
The Tegra SDHCI binding dictates that the reseet name for the Tegra SDHCI
clock be "sdhci" not "sdmmc", and that the clock is accessed by index
rather than by name. Fix the Tegra186 DT and MMC driver to honor this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-25 13:47:49 -07:00

787 lines
20 KiB
C

/*
* (C) Copyright 2009 SAMSUNG Electronics
* Minkyu Kang <mk7.kang@samsung.com>
* Jaehoon Chung <jh80.chung@samsung.com>
* Portions Copyright 2011-2015 NVIDIA Corporation
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <bouncebuf.h>
#include <common.h>
#include <dm/device.h>
#include <errno.h>
#include <asm/gpio.h>
#include <asm/io.h>
#ifndef CONFIG_TEGRA186
#include <asm/arch/clock.h>
#include <asm/arch-tegra/clk_rst.h>
#endif
#include <asm/arch-tegra/mmc.h>
#include <asm/arch-tegra/tegra_mmc.h>
#include <mmc.h>
/*
* FIXME: TODO: This driver contains a number of ifdef CONFIG_TEGRA186 that
* should not be present. These are needed because newer Tegra SoCs support
* only the standard clock/reset APIs, whereas older Tegra SoCs support only
* a custom Tegra-specific API. ASAP the older Tegra SoCs' code should be
* fixed to implement the standard APIs, and all drivers converted to solely
* use the new standard APIs, with no ifdefs.
*/
DECLARE_GLOBAL_DATA_PTR;
struct mmc_host mmc_host[CONFIG_SYS_MMC_MAX_DEVICE];
#if !CONFIG_IS_ENABLED(OF_CONTROL)
#error "Please enable device tree support to use this driver"
#endif
static void mmc_set_power(struct mmc_host *host, unsigned short power)
{
u8 pwr = 0;
debug("%s: power = %x\n", __func__, power);
if (power != (unsigned short)-1) {
switch (1 << power) {
case MMC_VDD_165_195:
pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V1_8;
break;
case MMC_VDD_29_30:
case MMC_VDD_30_31:
pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_0;
break;
case MMC_VDD_32_33:
case MMC_VDD_33_34:
pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_3;
break;
}
}
debug("%s: pwr = %X\n", __func__, pwr);
/* Set the bus voltage first (if any) */
writeb(pwr, &host->reg->pwrcon);
if (pwr == 0)
return;
/* Now enable bus power */
pwr |= TEGRA_MMC_PWRCTL_SD_BUS_POWER;
writeb(pwr, &host->reg->pwrcon);
}
static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data,
struct bounce_buffer *bbstate)
{
unsigned char ctrl;
debug("buf: %p (%p), data->blocks: %u, data->blocksize: %u\n",
bbstate->bounce_buffer, bbstate->user_buffer, data->blocks,
data->blocksize);
writel((u32)(unsigned long)bbstate->bounce_buffer, &host->reg->sysad);
/*
* DMASEL[4:3]
* 00 = Selects SDMA
* 01 = Reserved
* 10 = Selects 32-bit Address ADMA2
* 11 = Selects 64-bit Address ADMA2
*/
ctrl = readb(&host->reg->hostctl);
ctrl &= ~TEGRA_MMC_HOSTCTL_DMASEL_MASK;
ctrl |= TEGRA_MMC_HOSTCTL_DMASEL_SDMA;
writeb(ctrl, &host->reg->hostctl);
/* We do not handle DMA boundaries, so set it to max (512 KiB) */
writew((7 << 12) | (data->blocksize & 0xFFF), &host->reg->blksize);
writew(data->blocks, &host->reg->blkcnt);
}
static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data)
{
unsigned short mode;
debug(" mmc_set_transfer_mode called\n");
/*
* TRNMOD
* MUL1SIN0[5] : Multi/Single Block Select
* RD1WT0[4] : Data Transfer Direction Select
* 1 = read
* 0 = write
* ENACMD12[2] : Auto CMD12 Enable
* ENBLKCNT[1] : Block Count Enable
* ENDMA[0] : DMA Enable
*/
mode = (TEGRA_MMC_TRNMOD_DMA_ENABLE |
TEGRA_MMC_TRNMOD_BLOCK_COUNT_ENABLE);
if (data->blocks > 1)
mode |= TEGRA_MMC_TRNMOD_MULTI_BLOCK_SELECT;
if (data->flags & MMC_DATA_READ)
mode |= TEGRA_MMC_TRNMOD_DATA_XFER_DIR_SEL_READ;
writew(mode, &host->reg->trnmod);
}
static int mmc_wait_inhibit(struct mmc_host *host,
struct mmc_cmd *cmd,
struct mmc_data *data,
unsigned int timeout)
{
/*
* PRNSTS
* CMDINHDAT[1] : Command Inhibit (DAT)
* CMDINHCMD[0] : Command Inhibit (CMD)
*/
unsigned int mask = TEGRA_MMC_PRNSTS_CMD_INHIBIT_CMD;
/*
* We shouldn't wait for data inhibit for stop commands, even
* though they might use busy signaling
*/
if ((data == NULL) && (cmd->resp_type & MMC_RSP_BUSY))
mask |= TEGRA_MMC_PRNSTS_CMD_INHIBIT_DAT;
while (readl(&host->reg->prnsts) & mask) {
if (timeout == 0) {
printf("%s: timeout error\n", __func__);
return -1;
}
timeout--;
udelay(1000);
}
return 0;
}
static int mmc_send_cmd_bounced(struct mmc *mmc, struct mmc_cmd *cmd,
struct mmc_data *data, struct bounce_buffer *bbstate)
{
struct mmc_host *host = mmc->priv;
int flags, i;
int result;
unsigned int mask = 0;
unsigned int retry = 0x100000;
debug(" mmc_send_cmd called\n");
result = mmc_wait_inhibit(host, cmd, data, 10 /* ms */);
if (result < 0)
return result;
if (data)
mmc_prepare_data(host, data, bbstate);
debug("cmd->arg: %08x\n", cmd->cmdarg);
writel(cmd->cmdarg, &host->reg->argument);
if (data)
mmc_set_transfer_mode(host, data);
if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
return -1;
/*
* CMDREG
* CMDIDX[13:8] : Command index
* DATAPRNT[5] : Data Present Select
* ENCMDIDX[4] : Command Index Check Enable
* ENCMDCRC[3] : Command CRC Check Enable
* RSPTYP[1:0]
* 00 = No Response
* 01 = Length 136
* 10 = Length 48
* 11 = Length 48 Check busy after response
*/
if (!(cmd->resp_type & MMC_RSP_PRESENT))
flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_NO_RESPONSE;
else if (cmd->resp_type & MMC_RSP_136)
flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_136;
else if (cmd->resp_type & MMC_RSP_BUSY)
flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48_BUSY;
else
flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48;
if (cmd->resp_type & MMC_RSP_CRC)
flags |= TEGRA_MMC_TRNMOD_CMD_CRC_CHECK;
if (cmd->resp_type & MMC_RSP_OPCODE)
flags |= TEGRA_MMC_TRNMOD_CMD_INDEX_CHECK;
if (data)
flags |= TEGRA_MMC_TRNMOD_DATA_PRESENT_SELECT_DATA_TRANSFER;
debug("cmd: %d\n", cmd->cmdidx);
writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg);
for (i = 0; i < retry; i++) {
mask = readl(&host->reg->norintsts);
/* Command Complete */
if (mask & TEGRA_MMC_NORINTSTS_CMD_COMPLETE) {
if (!data)
writel(mask, &host->reg->norintsts);
break;
}
}
if (i == retry) {
printf("%s: waiting for status update\n", __func__);
writel(mask, &host->reg->norintsts);
return -ETIMEDOUT;
}
if (mask & TEGRA_MMC_NORINTSTS_CMD_TIMEOUT) {
/* Timeout Error */
debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx);
writel(mask, &host->reg->norintsts);
return -ETIMEDOUT;
} else if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) {
/* Error Interrupt */
debug("error: %08x cmd %d\n", mask, cmd->cmdidx);
writel(mask, &host->reg->norintsts);
return -1;
}
if (cmd->resp_type & MMC_RSP_PRESENT) {
if (cmd->resp_type & MMC_RSP_136) {
/* CRC is stripped so we need to do some shifting. */
for (i = 0; i < 4; i++) {
unsigned long offset =
(unsigned long)(&host->reg->rspreg3 - i);
cmd->response[i] = readl(offset) << 8;
if (i != 3) {
cmd->response[i] |=
readb(offset - 1);
}
debug("cmd->resp[%d]: %08x\n",
i, cmd->response[i]);
}
} else if (cmd->resp_type & MMC_RSP_BUSY) {
for (i = 0; i < retry; i++) {
/* PRNTDATA[23:20] : DAT[3:0] Line Signal */
if (readl(&host->reg->prnsts)
& (1 << 20)) /* DAT[0] */
break;
}
if (i == retry) {
printf("%s: card is still busy\n", __func__);
writel(mask, &host->reg->norintsts);
return -ETIMEDOUT;
}
cmd->response[0] = readl(&host->reg->rspreg0);
debug("cmd->resp[0]: %08x\n", cmd->response[0]);
} else {
cmd->response[0] = readl(&host->reg->rspreg0);
debug("cmd->resp[0]: %08x\n", cmd->response[0]);
}
}
if (data) {
unsigned long start = get_timer(0);
while (1) {
mask = readl(&host->reg->norintsts);
if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) {
/* Error Interrupt */
writel(mask, &host->reg->norintsts);
printf("%s: error during transfer: 0x%08x\n",
__func__, mask);
return -1;
} else if (mask & TEGRA_MMC_NORINTSTS_DMA_INTERRUPT) {
/*
* DMA Interrupt, restart the transfer where
* it was interrupted.
*/
unsigned int address = readl(&host->reg->sysad);
debug("DMA end\n");
writel(TEGRA_MMC_NORINTSTS_DMA_INTERRUPT,
&host->reg->norintsts);
writel(address, &host->reg->sysad);
} else if (mask & TEGRA_MMC_NORINTSTS_XFER_COMPLETE) {
/* Transfer Complete */
debug("r/w is done\n");
break;
} else if (get_timer(start) > 8000UL) {
writel(mask, &host->reg->norintsts);
printf("%s: MMC Timeout\n"
" Interrupt status 0x%08x\n"
" Interrupt status enable 0x%08x\n"
" Interrupt signal enable 0x%08x\n"
" Present status 0x%08x\n",
__func__, mask,
readl(&host->reg->norintstsen),
readl(&host->reg->norintsigen),
readl(&host->reg->prnsts));
return -1;
}
}
writel(mask, &host->reg->norintsts);
}
udelay(1000);
return 0;
}
static int tegra_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
struct mmc_data *data)
{
void *buf;
unsigned int bbflags;
size_t len;
struct bounce_buffer bbstate;
int ret;
if (data) {
if (data->flags & MMC_DATA_READ) {
buf = data->dest;
bbflags = GEN_BB_WRITE;
} else {
buf = (void *)data->src;
bbflags = GEN_BB_READ;
}
len = data->blocks * data->blocksize;
bounce_buffer_start(&bbstate, buf, len, bbflags);
}
ret = mmc_send_cmd_bounced(mmc, cmd, data, &bbstate);
if (data)
bounce_buffer_stop(&bbstate);
return ret;
}
static void mmc_change_clock(struct mmc_host *host, uint clock)
{
int div;
unsigned short clk;
unsigned long timeout;
debug(" mmc_change_clock called\n");
/*
* Change Tegra SDMMCx clock divisor here. Source is PLLP_OUT0
*/
if (clock == 0)
goto out;
#ifdef CONFIG_TEGRA186
{
ulong rate = clk_set_rate(&host->clk, clock);
div = (rate + clock - 1) / clock;
}
#else
clock_adjust_periph_pll_div(host->mmc_id, CLOCK_ID_PERIPH, clock,
&div);
#endif
debug("div = %d\n", div);
writew(0, &host->reg->clkcon);
/*
* CLKCON
* SELFREQ[15:8] : base clock divided by value
* ENSDCLK[2] : SD Clock Enable
* STBLINTCLK[1] : Internal Clock Stable
* ENINTCLK[0] : Internal Clock Enable
*/
div >>= 1;
clk = ((div << TEGRA_MMC_CLKCON_SDCLK_FREQ_SEL_SHIFT) |
TEGRA_MMC_CLKCON_INTERNAL_CLOCK_ENABLE);
writew(clk, &host->reg->clkcon);
/* Wait max 10 ms */
timeout = 10;
while (!(readw(&host->reg->clkcon) &
TEGRA_MMC_CLKCON_INTERNAL_CLOCK_STABLE)) {
if (timeout == 0) {
printf("%s: timeout error\n", __func__);
return;
}
timeout--;
udelay(1000);
}
clk |= TEGRA_MMC_CLKCON_SD_CLOCK_ENABLE;
writew(clk, &host->reg->clkcon);
debug("mmc_change_clock: clkcon = %08X\n", clk);
out:
host->clock = clock;
}
static void tegra_mmc_set_ios(struct mmc *mmc)
{
struct mmc_host *host = mmc->priv;
unsigned char ctrl;
debug(" mmc_set_ios called\n");
debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
/* Change clock first */
mmc_change_clock(host, mmc->clock);
ctrl = readb(&host->reg->hostctl);
/*
* WIDE8[5]
* 0 = Depend on WIDE4
* 1 = 8-bit mode
* WIDE4[1]
* 1 = 4-bit mode
* 0 = 1-bit mode
*/
if (mmc->bus_width == 8)
ctrl |= (1 << 5);
else if (mmc->bus_width == 4)
ctrl |= (1 << 1);
else
ctrl &= ~(1 << 1);
writeb(ctrl, &host->reg->hostctl);
debug("mmc_set_ios: hostctl = %08X\n", ctrl);
}
static void mmc_reset(struct mmc_host *host, struct mmc *mmc)
{
unsigned int timeout;
debug(" mmc_reset called\n");
/*
* RSTALL[0] : Software reset for all
* 1 = reset
* 0 = work
*/
writeb(TEGRA_MMC_SWRST_SW_RESET_FOR_ALL, &host->reg->swrst);
host->clock = 0;
/* Wait max 100 ms */
timeout = 100;
/* hw clears the bit when it's done */
while (readb(&host->reg->swrst) & TEGRA_MMC_SWRST_SW_RESET_FOR_ALL) {
if (timeout == 0) {
printf("%s: timeout error\n", __func__);
return;
}
timeout--;
udelay(1000);
}
/* Set SD bus voltage & enable bus power */
mmc_set_power(host, fls(mmc->cfg->voltages) - 1);
debug("%s: power control = %02X, host control = %02X\n", __func__,
readb(&host->reg->pwrcon), readb(&host->reg->hostctl));
/* Make sure SDIO pads are set up */
pad_init_mmc(host);
}
static int tegra_mmc_core_init(struct mmc *mmc)
{
struct mmc_host *host = mmc->priv;
unsigned int mask;
debug(" mmc_core_init called\n");
mmc_reset(host, mmc);
host->version = readw(&host->reg->hcver);
debug("host version = %x\n", host->version);
/* mask all */
writel(0xffffffff, &host->reg->norintstsen);
writel(0xffffffff, &host->reg->norintsigen);
writeb(0xe, &host->reg->timeoutcon); /* TMCLK * 2^27 */
/*
* NORMAL Interrupt Status Enable Register init
* [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable
* [4] ENSTABUFWTRDY : Buffer write Ready Status Enable
* [3] ENSTADMAINT : DMA boundary interrupt
* [1] ENSTASTANSCMPLT : Transfre Complete Status Enable
* [0] ENSTACMDCMPLT : Command Complete Status Enable
*/
mask = readl(&host->reg->norintstsen);
mask &= ~(0xffff);
mask |= (TEGRA_MMC_NORINTSTSEN_CMD_COMPLETE |
TEGRA_MMC_NORINTSTSEN_XFER_COMPLETE |
TEGRA_MMC_NORINTSTSEN_DMA_INTERRUPT |
TEGRA_MMC_NORINTSTSEN_BUFFER_WRITE_READY |
TEGRA_MMC_NORINTSTSEN_BUFFER_READ_READY);
writel(mask, &host->reg->norintstsen);
/*
* NORMAL Interrupt Signal Enable Register init
* [1] ENSTACMDCMPLT : Transfer Complete Signal Enable
*/
mask = readl(&host->reg->norintsigen);
mask &= ~(0xffff);
mask |= TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE;
writel(mask, &host->reg->norintsigen);
return 0;
}
static int tegra_mmc_getcd(struct mmc *mmc)
{
struct mmc_host *host = mmc->priv;
debug("tegra_mmc_getcd called\n");
if (dm_gpio_is_valid(&host->cd_gpio))
return dm_gpio_get_value(&host->cd_gpio);
return 1;
}
static const struct mmc_ops tegra_mmc_ops = {
.send_cmd = tegra_mmc_send_cmd,
.set_ios = tegra_mmc_set_ios,
.init = tegra_mmc_core_init,
.getcd = tegra_mmc_getcd,
};
static int do_mmc_init(int dev_index, bool removable)
{
struct mmc_host *host;
struct mmc *mmc;
#ifdef CONFIG_TEGRA186
int ret;
#endif
/* DT should have been read & host config filled in */
host = &mmc_host[dev_index];
if (!host->enabled)
return -1;
debug(" do_mmc_init: index %d, bus width %d pwr_gpio %d cd_gpio %d\n",
dev_index, host->width, gpio_get_number(&host->pwr_gpio),
gpio_get_number(&host->cd_gpio));
host->clock = 0;
#ifdef CONFIG_TEGRA186
ret = reset_assert(&host->reset_ctl);
if (ret)
return ret;
ret = clk_enable(&host->clk);
if (ret)
return ret;
ret = clk_set_rate(&host->clk, 20000000);
if (IS_ERR_VALUE(ret))
return ret;
ret = reset_deassert(&host->reset_ctl);
if (ret)
return ret;
#else
clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000);
#endif
if (dm_gpio_is_valid(&host->pwr_gpio))
dm_gpio_set_value(&host->pwr_gpio, 1);
memset(&host->cfg, 0, sizeof(host->cfg));
host->cfg.name = "Tegra SD/MMC";
host->cfg.ops = &tegra_mmc_ops;
host->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
host->cfg.host_caps = 0;
if (host->width == 8)
host->cfg.host_caps |= MMC_MODE_8BIT;
if (host->width >= 4)
host->cfg.host_caps |= MMC_MODE_4BIT;
host->cfg.host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
/*
* min freq is for card identification, and is the highest
* low-speed SDIO card frequency (actually 400KHz)
* max freq is highest HS eMMC clock as per the SD/MMC spec
* (actually 52MHz)
*/
host->cfg.f_min = 375000;
host->cfg.f_max = 48000000;
host->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
mmc = mmc_create(&host->cfg, host);
mmc->block_dev.removable = removable;
if (mmc == NULL)
return -1;
return 0;
}
/**
* Get the host address and peripheral ID for a node.
*
* @param blob fdt blob
* @param node Device index (0-3)
* @param host Structure to fill in (reg, width, mmc_id)
*/
static int mmc_get_config(const void *blob, int node, struct mmc_host *host,
bool *removablep)
{
debug("%s: node = %d\n", __func__, node);
host->enabled = fdtdec_get_is_enabled(blob, node);
host->reg = (struct tegra_mmc *)fdtdec_get_addr(blob, node, "reg");
if ((fdt_addr_t)host->reg == FDT_ADDR_T_NONE) {
debug("%s: no sdmmc base reg info found\n", __func__);
return -FDT_ERR_NOTFOUND;
}
#ifdef CONFIG_TEGRA186
{
/*
* FIXME: This variable should go away when the MMC device
* actually is a udevice.
*/
struct udevice dev;
int ret;
dev.of_offset = node;
ret = reset_get_by_name(&dev, "sdhci", &host->reset_ctl);
if (ret) {
debug("reset_get_by_name() failed: %d\n", ret);
return ret;
}
ret = clk_get_by_index(&dev, 0, &host->clk);
if (ret) {
debug("clk_get_by_index() failed: %d\n", ret);
return ret;
}
}
#else
host->mmc_id = clock_decode_periph_id(blob, node);
if (host->mmc_id == PERIPH_ID_NONE) {
debug("%s: could not decode periph id\n", __func__);
return -FDT_ERR_NOTFOUND;
}
#endif
/*
* NOTE: mmc->bus_width is determined by mmc.c dynamically.
* TBD: Override it with this value?
*/
host->width = fdtdec_get_int(blob, node, "bus-width", 0);
if (!host->width)
debug("%s: no sdmmc width found\n", __func__);
/* These GPIOs are optional */
gpio_request_by_name_nodev(blob, node, "cd-gpios", 0, &host->cd_gpio,
GPIOD_IS_IN);
gpio_request_by_name_nodev(blob, node, "wp-gpios", 0, &host->wp_gpio,
GPIOD_IS_IN);
gpio_request_by_name_nodev(blob, node, "power-gpios", 0,
&host->pwr_gpio, GPIOD_IS_OUT);
*removablep = !fdtdec_get_bool(blob, node, "non-removable");
debug("%s: found controller at %p, width = %d, periph_id = %d\n",
__func__, host->reg, host->width,
#ifndef CONFIG_TEGRA186
host->mmc_id
#else
-1
#endif
);
return 0;
}
/*
* Process a list of nodes, adding them to our list of SDMMC ports.
*
* @param blob fdt blob
* @param node_list list of nodes to process (any <=0 are ignored)
* @param count number of nodes to process
* @return 0 if ok, -1 on error
*/
static int process_nodes(const void *blob, int node_list[], int count)
{
struct mmc_host *host;
bool removable;
int i, node;
debug("%s: count = %d\n", __func__, count);
/* build mmc_host[] for each controller */
for (i = 0; i < count; i++) {
node = node_list[i];
if (node <= 0)
continue;
host = &mmc_host[i];
host->id = i;
if (mmc_get_config(blob, node, host, &removable)) {
printf("%s: failed to decode dev %d\n", __func__, i);
return -1;
}
do_mmc_init(i, removable);
}
return 0;
}
void tegra_mmc_init(void)
{
int node_list[CONFIG_SYS_MMC_MAX_DEVICE], count;
const void *blob = gd->fdt_blob;
debug("%s entry\n", __func__);
/* See if any Tegra186 MMC controllers are present */
count = fdtdec_find_aliases_for_id(blob, "sdhci",
COMPAT_NVIDIA_TEGRA186_SDMMC, node_list,
CONFIG_SYS_MMC_MAX_DEVICE);
debug("%s: count of Tegra186 sdhci nodes is %d\n", __func__, count);
if (process_nodes(blob, node_list, count)) {
printf("%s: Error processing T186 mmc node(s)!\n", __func__);
return;
}
/* See if any Tegra210 MMC controllers are present */
count = fdtdec_find_aliases_for_id(blob, "sdhci",
COMPAT_NVIDIA_TEGRA210_SDMMC, node_list,
CONFIG_SYS_MMC_MAX_DEVICE);
debug("%s: count of Tegra210 sdhci nodes is %d\n", __func__, count);
if (process_nodes(blob, node_list, count)) {
printf("%s: Error processing T210 mmc node(s)!\n", __func__);
return;
}
/* See if any Tegra124 MMC controllers are present */
count = fdtdec_find_aliases_for_id(blob, "sdhci",
COMPAT_NVIDIA_TEGRA124_SDMMC, node_list,
CONFIG_SYS_MMC_MAX_DEVICE);
debug("%s: count of Tegra124 sdhci nodes is %d\n", __func__, count);
if (process_nodes(blob, node_list, count)) {
printf("%s: Error processing T124 mmc node(s)!\n", __func__);
return;
}
/* See if any Tegra30 MMC controllers are present */
count = fdtdec_find_aliases_for_id(blob, "sdhci",
COMPAT_NVIDIA_TEGRA30_SDMMC, node_list,
CONFIG_SYS_MMC_MAX_DEVICE);
debug("%s: count of T30 sdhci nodes is %d\n", __func__, count);
if (process_nodes(blob, node_list, count)) {
printf("%s: Error processing T30 mmc node(s)!\n", __func__);
return;
}
/* Now look for any Tegra20 MMC controllers */
count = fdtdec_find_aliases_for_id(blob, "sdhci",
COMPAT_NVIDIA_TEGRA20_SDMMC, node_list,
CONFIG_SYS_MMC_MAX_DEVICE);
debug("%s: count of T20 sdhci nodes is %d\n", __func__, count);
if (process_nodes(blob, node_list, count)) {
printf("%s: Error processing T20 mmc node(s)!\n", __func__);
return;
}
}