Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-24 20:13:39 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/powerpc/cpu/mpc83xx/start.S
Tom Rini 6e7df1d151 global: Finish CONFIG -> CFG migration 
At this point, the remaining places where we have a symbol that is
defined as CONFIG_... are in fairly odd locations. While as much dead
code has been removed as possible, some of these locations are simply
less obvious at first. In other cases, this code is used, but was
defined in such a way as to have been missed by earlier checks.  Perform
a rename of all such remaining symbols to be CFG_... rather than
CONFIG_...

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-20 12:27:24 -05:00

1185 lines
29 KiB
ArmAsm
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
* Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
* Copyright Freescale Semiconductor, Inc. 2004, 2006, 2008.
*/
/*
* U-Boot - Startup Code for MPC83xx PowerPC based Embedded Boards
*/
#include <asm-offsets.h>
#include <config.h>
#include <mpc83xx.h>
#include <system-constants.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#include <asm/u-boot.h>
#include "hrcw/hrcw.h"
#include "bats/bats.h"
#include "hid/hid.h"
/* We don't want the MMU yet.
*/
#undef MSR_KERNEL
/*
* Floating Point enable, Machine Check and Recoverable Interr.
*/
#ifdef DEBUG
#define MSR_KERNEL (MSR_FP|MSR_RI)
#else
#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
#endif
#if defined(CONFIG_NAND_SPL) || \
(defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL))
#define MINIMAL_SPL
#endif
#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NAND_SPL) && \
!defined(CONFIG_SYS_RAMBOOT)
#define CFG_SYS_FLASHBOOT
#endif
/*
* Set up GOT: Global Offset Table
*
* Use r12 to access the GOT
*/
START_GOT
GOT_ENTRY(_GOT2_TABLE_)
GOT_ENTRY(__bss_start)
GOT_ENTRY(__bss_end)
#ifndef MINIMAL_SPL
GOT_ENTRY(_FIXUP_TABLE_)
GOT_ENTRY(_start)
GOT_ENTRY(_start_of_vectors)
GOT_ENTRY(_end_of_vectors)
GOT_ENTRY(transfer_to_handler)
#endif
END_GOT
/*
* The Hard Reset Configuration Word (HRCW) table is in the first 64
* (0x40) bytes of flash. It has 8 bytes, but each byte is repeated 8
* times so the processor can fetch it out of flash whether the flash
* is 8, 16, 32, or 64 bits wide (hardware trickery).
*/
.text
#define _HRCW_TABLE_ENTRY(w) \
.fill 8,1,(((w)>>24)&0xff); \
.fill 8,1,(((w)>>16)&0xff); \
.fill 8,1,(((w)>> 8)&0xff); \
.fill 8,1,(((w) )&0xff)
_HRCW_TABLE_ENTRY(CFG_SYS_HRCW_LOW)
_HRCW_TABLE_ENTRY(CFG_SYS_HRCW_HIGH)
/*
* Magic number and version string - put it after the HRCW since it
* cannot be first in flash like it is in many other processors.
*/
.long 0x27051956 /* U-Boot Magic Number */
.globl enable_addr_trans
enable_addr_trans:
/* enable address translation */
mfmsr r5
ori r5, r5, (MSR_IR | MSR_DR)
mtmsr r5
isync
blr
.globl disable_addr_trans
disable_addr_trans:
/* disable address translation */
mflr r4
mfmsr r3
andi. r0, r3, (MSR_IR | MSR_DR)
beqlr
andc r3, r3, r0
mtspr SRR0, r4
mtspr SRR1, r3
rfi
#ifndef CONFIG_DEFAULT_IMMR
#error CONFIG_DEFAULT_IMMR must be defined
#endif /* CONFIG_DEFAULT_IMMR */
/*
* After configuration, a system reset exception is executed using the
* vector at offset 0x100 relative to the base set by MSR[IP]. If
* MSR[IP] is 0, the base address is 0x00000000. If MSR[IP] is 1, the
* base address is 0xfff00000. In the case of a Power On Reset or Hard
* Reset, the value of MSR[IP] is determined by the CIP field in the
* HRCW.
*
* Other bits in the HRCW set up the Base Address and Port Size in BR0.
* This determines the location of the boot ROM (flash or EPROM) in the
* processor's address space at boot time. As long as the HRCW is set up
* so that we eventually end up executing the code below when the
* processor executes the reset exception, the actual values used should
* not matter.
*
* Once we have got here, the address mask in OR0 is cleared so that the
* bottom 32K of the boot ROM is effectively repeated all throughout the
* processor's address space, after which we can jump to the absolute
* address at which the boot ROM was linked at compile time, and proceed
* to initialise the memory controller without worrying if the rug will
* be pulled out from under us, so to speak (it will be fine as long as
* we configure BR0 with the same boot ROM link address).
*/
. = EXC_OFF_SYS_RESET
.globl _start
_start: /* time t 0 */
lis r4, CONFIG_DEFAULT_IMMR@h
nop
mfmsr r5 /* save msr contents */
/* 83xx manuals prescribe a specific sequence for updating IMMRBAR. */
bl 1f
1: mflr r7
lis r3, CONFIG_SYS_IMMR@h
ori r3, r3, CONFIG_SYS_IMMR@l
lwz r6, IMMRBAR(r4)
isync
stw r3, IMMRBAR(r4)
lwz r6, 0(r7) /* Arbitrary external load */
isync
lwz r6, IMMRBAR(r3)
isync
/* Initialise the E300 processor core */
/*------------------------------------------*/
#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_MPC83XX_WAIT_FOR_NAND)) || \
defined(CONFIG_NAND_SPL)
/* The FCM begins execution after only the first page
* is loaded. Wait for the rest before branching
* to another flash page.
*/
1: lwz r6, 0x50b0(r3)
andi. r6, r6, 1
beq 1b
#endif
bl init_e300_core
#ifdef CFG_SYS_FLASHBOOT
/* Inflate flash location so it appears everywhere, calculate */
/* the absolute address in final location of the FLASH, jump */
/* there and deflate the flash size back to minimal size */
/*------------------------------------------------------------*/
bl map_flash_by_law1
lis r4, (CONFIG_SYS_MONITOR_BASE)@h
ori r4, r4, (CONFIG_SYS_MONITOR_BASE)@l
addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET
mtlr r5
blr
in_flash:
#if 1 /* Remapping flash with LAW0. */
bl remap_flash_by_law0
#endif
#endif /* CFG_SYS_FLASHBOOT */
/* setup the bats */
bl setup_bats
sync
/*
* Cache must be enabled here for stack-in-cache trick.
* This means we need to enable the BATS.
* This means:
* 1) for the EVB, original gt regs need to be mapped
* 2) need to have an IBAT for the 0xf region,
* we are running there!
* Cache should be turned on after BATs, since by default
* everything is write-through.
* The init-mem BAT can be reused after reloc. The old
* gt-regs BAT can be reused after board_init_f calls
* board_early_init_f (EVB only).
*/
/* enable address translation */
bl enable_addr_trans
sync
/* enable the data cache */
bl dcache_enable
sync
#ifdef CONFIG_SYS_INIT_RAM_LOCK
bl lock_ram_in_cache
sync
#endif
/* set up the stack pointer in our newly created
* cache-ram; use r3 to keep the new SP for now to
* avoid overiding the SP it uselessly */
lis r3, SYS_INIT_SP_ADDR@h
ori r3, r3, SYS_INIT_SP_ADDR@l
/* r4 = end of GD area */
addi r4, r3, GENERATED_GBL_DATA_SIZE
/* Zero GD area */
li r0, 0
1:
subi r4, r4, 1
stb r0, 0(r4)
cmplw r3, r4
bne 1b
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
#if CONFIG_VAL(SYS_MALLOC_F_LEN) + GENERATED_GBL_DATA_SIZE > CFG_SYS_INIT_RAM_SIZE
#error "SYS_MALLOC_F_LEN too large to fit into initial RAM."
#endif
/* r3 = new stack pointer / pre-reloc malloc area */
subi r3, r3, CONFIG_VAL(SYS_MALLOC_F_LEN)
/* Set pointer to pre-reloc malloc area in GD */
stw r3, GD_MALLOC_BASE(r4)
#endif
li r0, 0 /* Make room for stack frame header and */
stwu r0, -4(r3) /* clear final stack frame so that */
stwu r0, -4(r3) /* stack backtraces terminate cleanly */
/* Finally, actually set SP */
mr r1, r3
/* let the C-code set up the rest */
/* */
/* Be careful to keep code relocatable & stack humble */
/*------------------------------------------------------*/
GET_GOT /* initialize GOT access */
/* Needed for -msingle-pic-base */
bl _GLOBAL_OFFSET_TABLE_@local-4
mflr r30
/* r3: IMMR */
lis r3, CONFIG_SYS_IMMR@h
/* run low-level CPU init code (in Flash)*/
bl cpu_init_f
/* run 1st part of board init code (in Flash)*/
li r3, 0 /* clear boot_flag for calling board_init_f */
bl board_init_f
/* NOTREACHED - board_init_f() does not return */
#ifndef MINIMAL_SPL
/*
* Vector Table
*/
.globl _start_of_vectors
_start_of_vectors:
/* Machine check */
STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
/* Data Storage exception. */
STD_EXCEPTION(0x300, DataStorage, UnknownException)
/* Instruction Storage exception. */
STD_EXCEPTION(0x400, InstStorage, UnknownException)
/* External Interrupt exception. */
#ifndef FIXME
STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
#endif
/* Alignment exception. */
. = 0x600
Alignment:
EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
stw r5,_DSISR(r21)
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
/* Program check exception */
. = 0x700
ProgramCheck:
EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
MSR_KERNEL, COPY_EE)
STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
/* I guess we could implement decrementer, and may have
* to someday for timekeeping.
*/
STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
STD_EXCEPTION(0xc00, SystemCall, UnknownException)
STD_EXCEPTION(0xd00, SingleStep, UnknownException)
STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
#ifdef DEBUG
. = 0x1300
/*
* This exception occurs when the program counter matches the
* Instruction Address Breakpoint Register (IABR).
*
* I want the cpu to halt if this occurs so I can hunt around
* with the debugger and look at things.
*
* When DEBUG is defined, both machine check enable (in the MSR)
* and checkstop reset enable (in the reset mode register) are
* turned off and so a checkstop condition will result in the cpu
* halting.
*
* I force the cpu into a checkstop condition by putting an illegal
* instruction here (at least this is the theory).
*
* well - that didnt work, so just do an infinite loop!
*/
1: b 1b
#else
STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
#endif
STD_EXCEPTION(0x1400, SMI, UnknownException)
STD_EXCEPTION(0x1500, Trap_15, UnknownException)
STD_EXCEPTION(0x1600, Trap_16, UnknownException)
STD_EXCEPTION(0x1700, Trap_17, UnknownException)
STD_EXCEPTION(0x1800, Trap_18, UnknownException)
STD_EXCEPTION(0x1900, Trap_19, UnknownException)
STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
STD_EXCEPTION(0x2000, Trap_20, UnknownException)
STD_EXCEPTION(0x2100, Trap_21, UnknownException)
STD_EXCEPTION(0x2200, Trap_22, UnknownException)
STD_EXCEPTION(0x2300, Trap_23, UnknownException)
STD_EXCEPTION(0x2400, Trap_24, UnknownException)
STD_EXCEPTION(0x2500, Trap_25, UnknownException)
STD_EXCEPTION(0x2600, Trap_26, UnknownException)
STD_EXCEPTION(0x2700, Trap_27, UnknownException)
STD_EXCEPTION(0x2800, Trap_28, UnknownException)
STD_EXCEPTION(0x2900, Trap_29, UnknownException)
STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
.globl _end_of_vectors
_end_of_vectors:
. = 0x3000
/*
* This code finishes saving the registers to the exception frame
* and jumps to the appropriate handler for the exception.
* Register r21 is pointer into trap frame, r1 has new stack pointer.
*/
.globl transfer_to_handler
transfer_to_handler:
stw r22,_NIP(r21)
lis r22,MSR_POW@h
andc r23,r23,r22
stw r23,_MSR(r21)
SAVE_GPR(7, r21)
SAVE_4GPRS(8, r21)
SAVE_8GPRS(12, r21)
SAVE_8GPRS(24, r21)
mflr r23
andi. r24,r23,0x3f00 /* get vector offset */
stw r24,TRAP(r21)
li r22,0
stw r22,RESULT(r21)
lwz r24,0(r23) /* virtual address of handler */
lwz r23,4(r23) /* where to go when done */
mtspr SRR0,r24
mtspr SRR1,r20
mtlr r23
SYNC
rfi /* jump to handler, enable MMU */
int_return:
mfmsr r28 /* Disable interrupts */
li r4,0
ori r4,r4,MSR_EE
andc r28,r28,r4
SYNC /* Some chip revs need this... */
mtmsr r28
SYNC
lwz r2,_CTR(r1)
lwz r0,_LINK(r1)
mtctr r2
mtlr r0
lwz r2,_XER(r1)
lwz r0,_CCR(r1)
mtspr XER,r2
mtcrf 0xFF,r0
REST_10GPRS(3, r1)
REST_10GPRS(13, r1)
REST_8GPRS(23, r1)
REST_GPR(31, r1)
lwz r2,_NIP(r1) /* Restore environment */
lwz r0,_MSR(r1)
mtspr SRR0,r2
mtspr SRR1,r0
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
SYNC
rfi
#endif /* !MINIMAL_SPL */
/*
* This code initialises the E300 processor core
* (conforms to PowerPC 603e spec)
* Note: expects original MSR contents to be in r5.
*/
.globl init_e300_core
init_e300_core: /* time t 10 */
/* Initialize machine status; enable machine check interrupt */
/*-----------------------------------------------------------*/
li r3, MSR_KERNEL /* Set ME and RI flags */
rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
#ifdef DEBUG
rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
#endif
SYNC /* Some chip revs need this... */
mtmsr r3
SYNC
mtspr SRR1, r3 /* Make SRR1 match MSR */
lis r3, CONFIG_SYS_IMMR@h
#if defined(CONFIG_WATCHDOG)
/* Initialise the Watchdog values and reset it (if req) */
/*------------------------------------------------------*/
lis r4, CFG_SYS_WATCHDOG_VALUE
ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
stw r4, SWCRR(r3)
/* and reset it */
li r4, 0x556C
sth r4, SWSRR@l(r3)
li r4, -0x55C7
sth r4, SWSRR@l(r3)
#else
/* Disable Watchdog */
/*-------------------*/
lwz r4, SWCRR(r3)
/* Check to see if its enabled for disabling
once disabled by SW you can't re-enable */
andi. r4, r4, 0x4
beq 1f
xor r4, r4, r4
stw r4, SWCRR(r3)
1:
#endif /* CONFIG_WATCHDOG */
#if defined(CONFIG_MASK_AER_AO)
/* Write the Arbiter Event Enable to mask Address Only traps. */
/* This prevents the dcbz instruction from being trapped when */
/* HID0_ABE Address Broadcast Enable is set and the MEMORY */
/* COHERENCY bit is set in the WIMG bits, which is often */
/* needed for PCI operation. */
lwz r4, 0x0808(r3)
rlwinm r0, r4, 0, ~AER_AO
stw r0, 0x0808(r3)
#endif /* CONFIG_MASK_AER_AO */
/* Initialize the Hardware Implementation-dependent Registers */
/* HID0 also contains cache control */
/* - force invalidation of data and instruction caches */
/*------------------------------------------------------*/
lis r3, CFG_SYS_HID0_INIT@h
ori r3, r3, (CFG_SYS_HID0_INIT | HID0_ICFI | HID0_DCFI)@l
SYNC
mtspr HID0, r3
lis r3, CFG_SYS_HID0_FINAL@h
ori r3, r3, (CFG_SYS_HID0_FINAL & ~(HID0_ICFI | HID0_DCFI))@l
SYNC
mtspr HID0, r3
lis r3, CFG_SYS_HID2@h
ori r3, r3, CFG_SYS_HID2@l
SYNC
mtspr HID2, r3
/* Done! */
/*------------------------------*/
blr
/* setup_bats - set them up to some initial state */
.globl setup_bats
setup_bats:
addis r0, r0, 0x0000
/* IBAT 0 */
addis r4, r0, CFG_SYS_IBAT0L@h
ori r4, r4, CFG_SYS_IBAT0L@l
addis r3, r0, CFG_SYS_IBAT0U@h
ori r3, r3, CFG_SYS_IBAT0U@l
mtspr IBAT0L, r4
mtspr IBAT0U, r3
/* DBAT 0 */
addis r4, r0, CFG_SYS_DBAT0L@h
ori r4, r4, CFG_SYS_DBAT0L@l
addis r3, r0, CFG_SYS_DBAT0U@h
ori r3, r3, CFG_SYS_DBAT0U@l
mtspr DBAT0L, r4
mtspr DBAT0U, r3
/* IBAT 1 */
addis r4, r0, CFG_SYS_IBAT1L@h
ori r4, r4, CFG_SYS_IBAT1L@l
addis r3, r0, CFG_SYS_IBAT1U@h
ori r3, r3, CFG_SYS_IBAT1U@l
mtspr IBAT1L, r4
mtspr IBAT1U, r3
/* DBAT 1 */
addis r4, r0, CFG_SYS_DBAT1L@h
ori r4, r4, CFG_SYS_DBAT1L@l
addis r3, r0, CFG_SYS_DBAT1U@h
ori r3, r3, CFG_SYS_DBAT1U@l
mtspr DBAT1L, r4
mtspr DBAT1U, r3
/* IBAT 2 */
addis r4, r0, CFG_SYS_IBAT2L@h
ori r4, r4, CFG_SYS_IBAT2L@l
addis r3, r0, CFG_SYS_IBAT2U@h
ori r3, r3, CFG_SYS_IBAT2U@l
mtspr IBAT2L, r4
mtspr IBAT2U, r3
/* DBAT 2 */
addis r4, r0, CFG_SYS_DBAT2L@h
ori r4, r4, CFG_SYS_DBAT2L@l
addis r3, r0, CFG_SYS_DBAT2U@h
ori r3, r3, CFG_SYS_DBAT2U@l
mtspr DBAT2L, r4
mtspr DBAT2U, r3
/* IBAT 3 */
addis r4, r0, CFG_SYS_IBAT3L@h
ori r4, r4, CFG_SYS_IBAT3L@l
addis r3, r0, CFG_SYS_IBAT3U@h
ori r3, r3, CFG_SYS_IBAT3U@l
mtspr IBAT3L, r4
mtspr IBAT3U, r3
/* DBAT 3 */
addis r4, r0, CFG_SYS_DBAT3L@h
ori r4, r4, CFG_SYS_DBAT3L@l
addis r3, r0, CFG_SYS_DBAT3U@h
ori r3, r3, CFG_SYS_DBAT3U@l
mtspr DBAT3L, r4
mtspr DBAT3U, r3
#ifdef CONFIG_HIGH_BATS
/* IBAT 4 */
addis r4, r0, CFG_SYS_IBAT4L@h
ori r4, r4, CFG_SYS_IBAT4L@l
addis r3, r0, CFG_SYS_IBAT4U@h
ori r3, r3, CFG_SYS_IBAT4U@l
mtspr IBAT4L, r4
mtspr IBAT4U, r3
/* DBAT 4 */
addis r4, r0, CFG_SYS_DBAT4L@h
ori r4, r4, CFG_SYS_DBAT4L@l
addis r3, r0, CFG_SYS_DBAT4U@h
ori r3, r3, CFG_SYS_DBAT4U@l
mtspr DBAT4L, r4
mtspr DBAT4U, r3
/* IBAT 5 */
addis r4, r0, CFG_SYS_IBAT5L@h
ori r4, r4, CFG_SYS_IBAT5L@l
addis r3, r0, CFG_SYS_IBAT5U@h
ori r3, r3, CFG_SYS_IBAT5U@l
mtspr IBAT5L, r4
mtspr IBAT5U, r3
/* DBAT 5 */
addis r4, r0, CFG_SYS_DBAT5L@h
ori r4, r4, CFG_SYS_DBAT5L@l
addis r3, r0, CFG_SYS_DBAT5U@h
ori r3, r3, CFG_SYS_DBAT5U@l
mtspr DBAT5L, r4
mtspr DBAT5U, r3
/* IBAT 6 */
addis r4, r0, CFG_SYS_IBAT6L@h
ori r4, r4, CFG_SYS_IBAT6L@l
addis r3, r0, CFG_SYS_IBAT6U@h
ori r3, r3, CFG_SYS_IBAT6U@l
mtspr IBAT6L, r4
mtspr IBAT6U, r3
/* DBAT 6 */
addis r4, r0, CFG_SYS_DBAT6L@h
ori r4, r4, CFG_SYS_DBAT6L@l
addis r3, r0, CFG_SYS_DBAT6U@h
ori r3, r3, CFG_SYS_DBAT6U@l
mtspr DBAT6L, r4
mtspr DBAT6U, r3
/* IBAT 7 */
addis r4, r0, CFG_SYS_IBAT7L@h
ori r4, r4, CFG_SYS_IBAT7L@l
addis r3, r0, CFG_SYS_IBAT7U@h
ori r3, r3, CFG_SYS_IBAT7U@l
mtspr IBAT7L, r4
mtspr IBAT7U, r3
/* DBAT 7 */
addis r4, r0, CFG_SYS_DBAT7L@h
ori r4, r4, CFG_SYS_DBAT7L@l
addis r3, r0, CFG_SYS_DBAT7U@h
ori r3, r3, CFG_SYS_DBAT7U@l
mtspr DBAT7L, r4
mtspr DBAT7U, r3
#endif
isync
/* invalidate all tlb's
*
* From the 603e User Manual: "The 603e provides the ability to
* invalidate a TLB entry. The TLB Invalidate Entry (tlbie)
* instruction invalidates the TLB entry indexed by the EA, and
* operates on both the instruction and data TLBs simultaneously
* invalidating four TLB entries (both sets in each TLB). The
* index corresponds to bits 15-19 of the EA. To invalidate all
* entries within both TLBs, 32 tlbie instructions should be
* issued, incrementing this field by one each time."
*
* "Note that the tlbia instruction is not implemented on the
* 603e."
*
* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000
* incrementing by 0x1000 each time. The code below is sort of
* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S
*
*/
lis r3, 0
lis r5, 2
1:
tlbie r3
addi r3, r3, 0x1000
cmp 0, 0, r3, r5
blt 1b
blr
/* Cache functions.
*
* Note: requires that all cache bits in
* HID0 are in the low half word.
*/
#ifndef MINIMAL_SPL
.globl icache_enable
icache_enable:
mfspr r3, HID0
ori r3, r3, HID0_ICE
li r4, HID0_ICFI|HID0_ILOCK
andc r3, r3, r4
ori r4, r3, HID0_ICFI
isync
mtspr HID0, r4 /* sets enable and invalidate, clears lock */
isync
mtspr HID0, r3 /* clears invalidate */
blr
.globl icache_disable
icache_disable:
mfspr r3, HID0
lis r4, 0
ori r4, r4, HID0_ICE|HID0_ICFI|HID0_ILOCK
andc r3, r3, r4
isync
mtspr HID0, r3 /* clears invalidate, enable and lock */
blr
.globl icache_status
icache_status:
mfspr r3, HID0
rlwinm r3, r3, (31 - HID0_ICE_SHIFT + 1), 31, 31
blr
#endif /* !MINIMAL_SPL */
.globl dcache_enable
dcache_enable:
mfspr r3, HID0
li r5, HID0_DCFI|HID0_DLOCK
andc r3, r3, r5
ori r3, r3, HID0_DCE
sync
mtspr HID0, r3 /* enable, no invalidate */
blr
.globl dcache_disable
dcache_disable:
mflr r4
bl flush_dcache /* uses r3 and r5 */
mfspr r3, HID0
li r5, HID0_DCE|HID0_DLOCK
andc r3, r3, r5
ori r5, r3, HID0_DCFI
sync
mtspr HID0, r5 /* sets invalidate, clears enable and lock */
sync
mtspr HID0, r3 /* clears invalidate */
mtlr r4
blr
.globl dcache_status
dcache_status:
mfspr r3, HID0
rlwinm r3, r3, (31 - HID0_DCE_SHIFT + 1), 31, 31
blr
.globl flush_dcache
flush_dcache:
lis r3, 0
lis r5, CONFIG_SYS_CACHELINE_SIZE
1: cmp 0, 1, r3, r5
bge 2f
lwz r5, 0(r3)
lis r5, CONFIG_SYS_CACHELINE_SIZE
addi r3, r3, 0x4
b 1b
2: blr
/*-------------------------------------------------------------------*/
/*
* void relocate_code(addr_sp, gd, addr_moni)
*
* This "function" does not return, instead it continues in RAM
* after relocating the monitor code.
*
* r3 = dest
* r4 = src
* r5 = length in bytes
* r6 = cachelinesize
*/
.globl relocate_code
relocate_code:
mr r1, r3 /* Set new stack pointer */
mr r9, r4 /* Save copy of Global Data pointer */
mr r10, r5 /* Save copy of Destination Address */
GET_GOT
mr r3, r5 /* Destination Address */
lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
lwz r5, GOT(__bss_start)
sub r5, r5, r4
li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
/*
* Fix GOT pointer:
*
* New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE)
* + Destination Address
*
* Offset:
*/
sub r15, r10, r4
/* First our own GOT */
add r12, r12, r15
/* then the one used by the C code */
add r30, r30, r15
/*
* Now relocate code
*/
cmplw cr1,r3,r4
addi r0,r5,3
srwi. r0,r0,2
beq cr1,4f /* In place copy is not necessary */
beq 7f /* Protect against 0 count */
mtctr r0
bge cr1,2f
la r8,-4(r4)
la r7,-4(r3)
/* copy */
1: lwzu r0,4(r8)
stwu r0,4(r7)
bdnz 1b
addi r0,r5,3
srwi. r0,r0,2
mtctr r0
la r8,-4(r4)
la r7,-4(r3)
/* and compare */
20: lwzu r20,4(r8)
lwzu r21,4(r7)
xor. r22, r20, r21
bne 30f
bdnz 20b
b 4f
/* compare failed */
30: li r3, 0
blr
2: slwi r0,r0,2 /* re copy in reverse order ... y do we needed it? */
add r8,r4,r0
add r7,r3,r0
3: lwzu r0,-4(r8)
stwu r0,-4(r7)
bdnz 3b
/*
* Now flush the cache: note that we must start from a cache aligned
* address. Otherwise we might miss one cache line.
*/
4: cmpwi r6,0
add r5,r3,r5
beq 7f /* Always flush prefetch queue in any case */
subi r0,r6,1
andc r3,r3,r0
mr r4,r3
5: dcbst 0,r4
add r4,r4,r6
cmplw r4,r5
blt 5b
sync /* Wait for all dcbst to complete on bus */
mr r4,r3
6: icbi 0,r4
add r4,r4,r6
cmplw r4,r5
blt 6b
7: sync /* Wait for all icbi to complete on bus */
isync
/*
* We are done. Do not return, instead branch to second part of board
* initialization, now running from RAM.
*/
addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
mtlr r0
blr
in_ram:
/*
* Relocation Function, r12 point to got2+0x8000
*
* Adjust got2 pointers, no need to check for 0, this code
* already puts a few entries in the table.
*/
li r0,__got2_entries@sectoff@l
la r3,GOT(_GOT2_TABLE_)
lwz r11,GOT(_GOT2_TABLE_)
mtctr r0
sub r11,r3,r11
addi r3,r3,-4
1: lwzu r0,4(r3)
cmpwi r0,0
beq- 2f
add r0,r0,r11
stw r0,0(r3)
2: bdnz 1b
#ifndef MINIMAL_SPL
/*
* Now adjust the fixups and the pointers to the fixups
* in case we need to move ourselves again.
*/
li r0,__fixup_entries@sectoff@l
lwz r3,GOT(_FIXUP_TABLE_)
cmpwi r0,0
mtctr r0
addi r3,r3,-4
beq 4f
3: lwzu r4,4(r3)
lwzux r0,r4,r11
cmpwi r0,0
add r0,r0,r11
stw r4,0(r3)
beq- 5f
stw r0,0(r4)
5: bdnz 3b
4:
#endif
clear_bss:
/*
* Now clear BSS segment
*/
lwz r3,GOT(__bss_start)
lwz r4,GOT(__bss_end)
cmplw 0, r3, r4
beq 6f
li r0, 0
5:
stw r0, 0(r3)
addi r3, r3, 4
cmplw 0, r3, r4
bne 5b
6:
mr r3, r9 /* Global Data pointer */
mr r4, r10 /* Destination Address */
bl board_init_r
#ifndef MINIMAL_SPL
/*
* Copy exception vector code to low memory
*
* r3: dest_addr
* r7: source address, r8: end address, r9: target address
*/
.globl trap_init
trap_init:
mflr r4 /* save link register */
GET_GOT
lwz r7, GOT(_start)
lwz r8, GOT(_end_of_vectors)
li r9, 0x100 /* reset vector always at 0x100 */
cmplw 0, r7, r8
bgelr /* return if r7>=r8 - just in case */
1:
lwz r0, 0(r7)
stw r0, 0(r9)
addi r7, r7, 4
addi r9, r9, 4
cmplw 0, r7, r8
bne 1b
/*
* relocate `hdlr' and `int_return' entries
*/
li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
li r8, Alignment - _start + EXC_OFF_SYS_RESET
2:
bl trap_reloc
addi r7, r7, 0x100 /* next exception vector */
cmplw 0, r7, r8
blt 2b
li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
bl trap_reloc
li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
bl trap_reloc
li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
li r8, SystemCall - _start + EXC_OFF_SYS_RESET
3:
bl trap_reloc
addi r7, r7, 0x100 /* next exception vector */
cmplw 0, r7, r8
blt 3b
li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
4:
bl trap_reloc
addi r7, r7, 0x100 /* next exception vector */
cmplw 0, r7, r8
blt 4b
mfmsr r3 /* now that the vectors have */
lis r7, MSR_IP@h /* relocated into low memory */
ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
andc r3, r3, r7 /* (if it was on) */
SYNC /* Some chip revs need this... */
mtmsr r3
SYNC
mtlr r4 /* restore link register */
blr
#endif /* !MINIMAL_SPL */
#ifdef CONFIG_SYS_INIT_RAM_LOCK
lock_ram_in_cache:
/* Allocate Initial RAM in data cache.
*/
lis r3, (CFG_SYS_INIT_RAM_ADDR & ~31)@h
ori r3, r3, (CFG_SYS_INIT_RAM_ADDR & ~31)@l
li r4, ((CFG_SYS_INIT_RAM_SIZE & ~31) + \
(CFG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
mtctr r4
1:
dcbz r0, r3
addi r3, r3, 32
bdnz 1b
/* Lock the data cache */
mfspr r0, HID0
ori r0, r0, HID0_DLOCK
sync
mtspr HID0, r0
sync
blr
#ifndef MINIMAL_SPL
.globl unlock_ram_in_cache
unlock_ram_in_cache:
/* invalidate the INIT_RAM section */
lis r3, (CFG_SYS_INIT_RAM_ADDR & ~31)@h
ori r3, r3, (CFG_SYS_INIT_RAM_ADDR & ~31)@l
li r4, ((CFG_SYS_INIT_RAM_SIZE & ~31) + \
(CFG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
mtctr r4
1: icbi r0, r3
dcbi r0, r3
addi r3, r3, 32
bdnz 1b
sync /* Wait for all icbi to complete on bus */
isync
/* Unlock the data cache and invalidate it */
mfspr r3, HID0
li r5, HID0_DLOCK|HID0_DCFI
andc r3, r3, r5 /* no invalidate, unlock */
ori r5, r3, HID0_DCFI /* invalidate, unlock */
sync
mtspr HID0, r5 /* invalidate, unlock */
sync
mtspr HID0, r3 /* no invalidate, unlock */
blr
#endif /* !MINIMAL_SPL */
#endif /* CONFIG_SYS_INIT_RAM_LOCK */
#ifdef CFG_SYS_FLASHBOOT
map_flash_by_law1:
/* When booting from ROM (Flash or EPROM), clear the */
/* Address Mask in OR0 so ROM appears everywhere */
/*----------------------------------------------------*/
lis r3, (CONFIG_SYS_IMMR)@h /* r3 <= CONFIG_SYS_IMMR */
lwz r4, OR0@l(r3)
li r5, 0x7fff /* r5 <= 0x00007FFFF */
and r4, r4, r5
stw r4, OR0@l(r3) /* OR0 <= OR0 & 0x00007FFFF */
/* As MPC8349E User's Manual presented, when RCW[BMS] is set to 0,
* system will boot from 0x0000_0100, and the LBLAWBAR0[BASE_ADDR]
* reset value is 0x00000; when RCW[BMS] is set to 1, system will boot
* from 0xFFF0_0100, and the LBLAWBAR0[BASE_ADDR] reset value is
* 0xFF800. From the hard resetting to here, the processor fetched and
* executed the instructions one by one. There is not absolutely
* jumping happened. Laterly, the u-boot code has to do an absolutely
* jumping to tell the CPU instruction fetching component what the
* u-boot TEXT base address is. Because the TEXT base resides in the
* boot ROM memory space, to garantee the code can run smoothly after
* that jumping, we must map in the entire boot ROM by Local Access
* Window. Sometimes, we desire an non-0x00000 or non-0xFF800 starting
* address for boot ROM, such as 0xFE000000. In this case, the default
* LBIU Local Access Widow 0 will not cover this memory space. So, we
* need another window to map in it.
*/
lis r4, (CFG_SYS_FLASH_BASE)@h
ori r4, r4, (CFG_SYS_FLASH_BASE)@l
stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CFG_SYS_FLASH_BASE */
/* Store 0x80000012 + log2(CFG_SYS_FLASH_SIZE) into LBLAWAR1 */
lis r4, (0x80000012)@h
ori r4, r4, (0x80000012)@l
li r5, CFG_SYS_FLASH_SIZE
1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */
addi r4, r4, 1
bne 1b
stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */
/* Wait for HW to catch up */
lwz r4, LBLAWAR1(r3)
twi 0,r4,0
isync
blr
/* Though all the LBIU Local Access Windows and LBC Banks will be
* initialized in the C code, we'd better configure boot ROM's
* window 0 and bank 0 correctly at here.
*/
remap_flash_by_law0:
/* Initialize the BR0 with the boot ROM starting address. */
lwz r4, BR0(r3)
li r5, 0x7FFF
and r4, r4, r5
lis r5, (CFG_SYS_FLASH_BASE & 0xFFFF8000)@h
ori r5, r5, (CFG_SYS_FLASH_BASE & 0xFFFF8000)@l
or r5, r5, r4
stw r5, BR0(r3) /* r5 <= (CFG_SYS_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
lwz r4, OR0(r3)
lis r5, ~((CFG_SYS_FLASH_SIZE << 4) - 1)
or r4, r4, r5
stw r4, OR0(r3)
lis r4, (CFG_SYS_FLASH_BASE)@h
ori r4, r4, (CFG_SYS_FLASH_BASE)@l
stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CFG_SYS_FLASH_BASE */
/* Store 0x80000012 + log2(CFG_SYS_FLASH_SIZE) into LBLAWAR0 */
lis r4, (0x80000012)@h
ori r4, r4, (0x80000012)@l
li r5, CFG_SYS_FLASH_SIZE
1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */
addi r4, r4, 1
bne 1b
stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= Flash Size */
xor r4, r4, r4
stw r4, LBLAWBAR1(r3)
stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
/* Wait for HW to catch up */
lwz r4, LBLAWAR1(r3)
twi 0,r4,0
isync
blr
#endif /* CFG_SYS_FLASHBOOT */
Reference in a new issue View git blame Copy permalink