u-boot/board/nvidia/dts/tegra20-harmony.dts
Tom Warren 126685ad44 Tegra: fdt: Add/enhance sdhci (mmc) nodes for all T20 DT files
Linux dts files were used for those boards that didn't already
have sdhci info populated. Tamonten has their own dtsi file with
common sdhci nodes (sourced from Linux).

Signed-off-by: Tom Warren <twarren@nvidia.com>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-03-14 11:06:42 -07:00

73 lines
1.3 KiB
Text

/dts-v1/;
#include "tegra20.dtsi"
/ {
model = "NVIDIA Tegra20 Harmony evaluation board";
compatible = "nvidia,harmony", "nvidia,tegra20";
aliases {
usb0 = "/usb@c5008000";
usb1 = "/usb@c5004000";
sdhci0 = "/sdhci@c8000600";
sdhci1 = "/sdhci@c8000200";
};
memory {
reg = <0x00000000 0x40000000>;
};
serial@70006300 {
clock-frequency = < 216000000 >;
};
nand-controller@70008000 {
nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */
nvidia,width = <8>;
nvidia,timing = <26 100 20 80 20 10 12 10 70>;
nand@0 {
reg = <0>;
compatible = "hynix,hy27uf4g2b", "nand-flash";
};
};
i2c@7000c000 {
status = "disabled";
};
i2c@7000c400 {
status = "disabled";
};
i2c@7000c500 {
status = "disabled";
};
i2c@7000d000 {
status = "disabled";
};
usb@c5000000 {
status = "disabled";
};
usb@c5004000 {
nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
};
sdhci@c8000200 {
status = "okay";
cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
bus-width = <4>;
};
sdhci@c8000600 {
status = "okay";
cd-gpios = <&gpio 58 1>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <8>;
};
};