mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
d5a24d8b53
Without this patch the following error will be shown: Colibri T20 # usb start starting USB... No controllers found This patch fixes USB operation and also the controller order as the CI UDC driver may only be instantiated on the first aka OTG port. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
162 lines
3.1 KiB
Text
162 lines
3.1 KiB
Text
/dts-v1/;
|
|
|
|
#include "tegra20.dtsi"
|
|
|
|
/ {
|
|
model = "Toradex Colibri T20";
|
|
compatible = "toradex,colibri_t20", "nvidia,tegra20";
|
|
|
|
chosen {
|
|
stdout-path = &uarta;
|
|
};
|
|
|
|
aliases {
|
|
i2c0 = "/i2c@7000d000";
|
|
i2c1 = "/i2c@7000c000";
|
|
i2c2 = "/i2c@7000c400";
|
|
mmc0 = "/sdhci@c8000600";
|
|
usb0 = "/usb@c5000000";
|
|
usb1 = "/usb@c5004000"; /* on-module only, for ASIX */
|
|
usb2 = "/usb@c5008000";
|
|
};
|
|
|
|
host1x@50000000 {
|
|
dc@54200000 {
|
|
rgb {
|
|
status = "okay";
|
|
nvidia,panel = <&lcd_panel>;
|
|
display-timings {
|
|
timing@0 {
|
|
/* VESA VGA */
|
|
clock-frequency = <25175000>;
|
|
hactive = <640>;
|
|
vactive = <480>;
|
|
hback-porch = <48>;
|
|
hfront-porch = <16>;
|
|
hsync-len = <96>;
|
|
vback-porch = <31>;
|
|
vfront-porch = <11>;
|
|
vsync-len = <2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
nand-controller@70008000 {
|
|
nvidia,wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
|
|
nvidia,width = <8>;
|
|
nvidia,timing = <15 100 25 80 25 10 15 10 100>;
|
|
|
|
nand@0 {
|
|
reg = <0>;
|
|
compatible = "nand-flash";
|
|
};
|
|
};
|
|
|
|
pwm@7000a000 {
|
|
status = "okay";
|
|
};
|
|
|
|
/*
|
|
* GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
|
|
* board)
|
|
*/
|
|
i2c@7000c000 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
/* GEN2_I2C: unused */
|
|
|
|
/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
|
|
i2c@7000c400 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
/*
|
|
* PWR_I2C: power I2C to PMIC and temperature sensor
|
|
*/
|
|
i2c@7000d000 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
|
|
usb@c5000000 {
|
|
status = "okay";
|
|
dr_mode = "otg";
|
|
};
|
|
|
|
/* EHCI instance 1: ULPI -> USB3340 -> AX88772B */
|
|
usb@c5004000 {
|
|
status = "okay";
|
|
/* VBUS_LAN */
|
|
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
|
|
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
|
|
usb@c5008000 {
|
|
status = "okay";
|
|
/* USBH_PEN */
|
|
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
sdhci@c8000600 {
|
|
status = "okay";
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
|
|
brightness-levels = <255 128 64 32 16 8 4 0>;
|
|
default-brightness-level = <6>;
|
|
/* BL_ON */
|
|
enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
|
|
power-supply = <®_3v3>;
|
|
/* PWM<A> */
|
|
pwms = <&pwm 0 5000000>;
|
|
};
|
|
|
|
clocks {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
clk32k_in: clock@0 {
|
|
compatible = "fixed-clock";
|
|
reg=<0>;
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
};
|
|
|
|
lcd_panel: panel {
|
|
/*
|
|
* edt,et057090dhu: EDT 5.7" LCD TFT
|
|
* edt,et070080dh6: EDT 7.0" LCD TFT
|
|
*/
|
|
compatible = "edt,et057090dhu", "simple-panel";
|
|
|
|
backlight = <&backlight>;
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reg_3v3: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "+V3.3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|