u-boot/include/configs/sipeed-maix.h
Sean Anderson a7c81fc853 riscv: Add Sipeed Maix support
The Sipeed Maix series is a collection of boards built around the RISC-V
Kendryte K210 processor. This processor contains several peripherals to
accelerate neural network processing and other "ai" tasks. This includes a
"KPU" neural network processor, an audio processor supporting beamforming
reception, and a digital video port supporting capture and output at VGA
resolution. Other peripherals include 8M of sram (accessible with and
without caching); remappable pins, including 40 GPIOs; AES, FFT, and SHA256
accelerators; a DMA controller; and I2C, I2S, and SPI controllers. Maix
peripherals vary, but include spi flash; on-board usb-serial bridges; ports
for cameras, displays, and sd cards; and ESP32 chips. Currently, only the
Sipeed Maix Bit V2.0 (bitm) is supported, but the boards are fairly
similar.

Documentation for Maix boards is located at
<http://dl.sipeed.com/MAIX/HDK/>.  Documentation for the Kendryte K210 is
located at <https://kendryte.com/downloads/>. However, hardware details are
rather lacking, so most technical reference has been taken from the
standalone sdk located at
<https://github.com/kendryte/kendryte-standalone-sdk>.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-07-01 15:01:22 +08:00

24 lines
668 B
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
*/
#ifndef CONFIGS_SIPEED_MAIX_H
#define CONFIGS_SIPEED_MAIX_H
#include <linux/sizes.h>
#define CONFIG_SYS_LOAD_ADDR 0x80000000
/* Start just below the second bank so we don't clobber it during reloc */
#define CONFIG_SYS_INIT_SP_ADDR 0x803FFFFF
#define CONFIG_SYS_MALLOC_LEN SZ_128K
#define CONFIG_SYS_CACHELINE_SIZE 64
#define CONFIG_SYS_SDRAM_BASE 0x80000000
/* Don't relocate into AI ram since it isn't set up yet */
#define CONFIG_SYS_SDRAM_SIZE (SZ_4M + SZ_2M)
/* For early init */
#define K210_SYSCTL_BASE 0x50440000
#endif /* CONFIGS_SIPEED_MAIX_H */