u-boot/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
Nishanth Menon b25c2d7127 arm: dts: k3-am625-beagleplay-u-boot/r5: Just depend on k3-binman.dtsi
With the upcoming folder separation, there is no further need to depend
on am625-binman.dtsi. Duplicate the existing definitions to u-boot.dtsi
and r5.dts as appropriate.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
2023-11-22 12:04:14 -05:00

325 lines
5 KiB
Text

// SPDX-License-Identifier: GPL-2.0
/*
* https://beagleboard.org/play
*
* Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
* Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation
*/
#include "k3-binman.dtsi"
/ {
chosen {
tick-timer = &main_timer0;
};
memory@80000000 {
bootph-all;
};
/* Keep the LEDs on by default to indicate life */
leds {
bootph-all;
led-0 {
default-state = "on";
bootph-all;
};
led-1 {
default-state = "on";
bootph-all;
};
led-2 {
default-state = "on";
bootph-all;
};
led-3 {
default-state = "on";
bootph-all;
};
led-4 {
default-state = "on";
bootph-all;
};
};
};
&cbass_main {
bootph-all;
};
&main_timer0 {
clock-frequency = <25000000>;
bootph-all;
};
&dmss {
bootph-all;
};
&secure_proxy_main {
bootph-all;
};
&dmsc {
bootph-all;
};
&k3_pds {
bootph-all;
};
&k3_clks {
bootph-all;
};
&k3_reset {
bootph-all;
};
&dmsc {
bootph-all;
k3_sysreset: sysreset-controller {
compatible = "ti,sci-sysreset";
bootph-all;
};
};
&wkup_conf {
bootph-all;
};
&chipid {
bootph-all;
};
&main_pmx0 {
bootph-all;
};
&main_uart0 {
bootph-all;
};
&console_pins_default {
bootph-all;
};
&cbass_mcu {
bootph-all;
};
&cbass_wakeup {
bootph-all;
};
&mcu_pmx0 {
bootph-all;
};
&main_i2c0 {
bootph-all;
};
&local_i2c_pins_default {
bootph-all;
};
&gpio0_pins_default {
bootph-all;
};
&main_gpio0 {
bootph-all;
};
&main_gpio1 {
bootph-all;
};
&sdhci0 {
/* EMMC */
bootph-all;
};
&emmc_pins_default {
bootph-all;
};
&sd_pins_default {
bootph-all;
/* Force to use SDCD card detect pin */
pinctrl-single,pins = <
AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
AM62X_IOPAD(0x0230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
AM62X_IOPAD(0x022c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
AM62X_IOPAD(0x0228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
AM62X_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
AM62X_IOPAD(0x0240, PIN_INPUT, 0) /* (D17) MMC1_SDCD.MMC1_SDCD */
>;
};
&tps65219 {
bootph-all;
};
&sdhci1 {
bootph-all;
};
#ifdef CONFIG_TARGET_AM625_A53_BEAGLEPLAY
#define SPL_NODTB "spl/u-boot-spl-nodtb.bin"
#define SPL_AM625_BEAGLEPLAY_DTB "spl/dts/k3-am625-beagleplay.dtb"
#define UBOOT_NODTB "u-boot-nodtb.bin"
#define AM625_BEAGLEPLAY_DTB "arch/arm/dts/k3-am625-beagleplay.dtb"
&binman {
ti-dm {
filename = "ti-dm.bin";
blob-ext {
filename = "ti-dm/am62xx/ipc_echo_testb_mcu1_0_release_strip.xer5f";
};
};
ti-spl_unsigned {
filename = "tispl.bin_unsigned";
pad-byte = <0xff>;
fit {
description = "Configuration to load ATF and SPL";
#address-cells = <1>;
images {
atf {
description = "ARM Trusted Firmware";
type = "firmware";
arch = "arm64";
compression = "none";
os = "arm-trusted-firmware";
load = <CONFIG_K3_ATF_LOAD_ADDR>;
entry = <CONFIG_K3_ATF_LOAD_ADDR>;
atf-bl31 {
filename = "bl31.bin";
};
};
tee {
description = "OP-TEE";
type = "tee";
arch = "arm64";
compression = "none";
os = "tee";
load = <0x9e800000>;
entry = <0x9e800000>;
tee-os {
filename = "tee-raw.bin";
};
};
dm {
description = "DM binary";
type = "firmware";
arch = "arm32";
compression = "none";
os = "DM";
load = <0x89000000>;
entry = <0x89000000>;
blob-ext {
filename = "ti-dm.bin";
};
};
spl {
description = "SPL (64-bit)";
type = "standalone";
os = "U-Boot";
arch = "arm64";
compression = "none";
load = <CONFIG_SPL_TEXT_BASE>;
entry = <CONFIG_SPL_TEXT_BASE>;
blob {
filename = "spl/u-boot-spl-nodtb.bin";
};
};
fdt-0 {
description = "k3-am625-beagleplay";
type = "flat_dt";
arch = "arm";
compression = "none";
spl_am625_bp_dtb_unsigned: blob {
filename = SPL_AM625_BEAGLEPLAY_DTB;
};
};
};
configurations {
default = "conf-0";
conf-0 {
description = "k3-am625-beagleplay";
firmware = "atf";
loadables = "tee", "dm", "spl";
fdt = "fdt-0";
};
};
};
};
u-boot_unsigned {
filename = "u-boot.img_unsigned";
pad-byte = <0xff>;
fit {
description = "FIT image with multiple configurations";
images {
uboot {
description = "U-Boot for AM625 board";
type = "firmware";
os = "u-boot";
arch = "arm";
compression = "none";
load = <CONFIG_TEXT_BASE>;
blob {
filename = UBOOT_NODTB;
};
hash {
algo = "crc32";
};
};
fdt-0 {
description = "k3-am625-beagleplay";
type = "flat_dt";
arch = "arm";
compression = "none";
am625_bp_dtb_unsigned: blob {
filename = AM625_BEAGLEPLAY_DTB;
};
hash {
algo = "crc32";
};
};
};
configurations {
default = "conf-0";
conf-0 {
description = "k3-am625-beagleplay";
firmware = "uboot";
loadables = "uboot";
fdt = "fdt-0";
};
};
};
};
};
#endif