u-boot/include/configs/rk3036_common.h
Simon Glass 2be296538e Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_IS_IN_MMC
   CONFIG_ENV_IS_IN_NAND
   CONFIG_ENV_IS_IN_UBI
   CONFIG_ENV_IS_NOWHERE

In fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.

In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.

There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with

   ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

And then manual updates.  This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-25 21:08:01 -04:00

98 lines
2.6 KiB
C

/*
* (C) Copyright 2015 Rockchip Electronics Co., Ltd
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_RK3036_COMMON_H
#define __CONFIG_RK3036_COMMON_H
#include <asm/arch/hardware.h>
#include "rockchip-common.h"
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000)
#define CONFIG_SYS_TIMER_BASE 0x200440a0 /* TIMER5 */
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8)
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_MEM32
#define CONFIG_SYS_TEXT_BASE 0x60000000
#define CONFIG_SYS_INIT_SP_ADDR 0x60100000
#define CONFIG_SYS_LOAD_ADDR 0x60800800
#define CONFIG_SPL_STACK 0x10081fff
#define CONFIG_SPL_TEXT_BASE 0x10081004
#define CONFIG_ROCKCHIP_MAX_INIT_SIZE (4 << 10)
#define CONFIG_ROCKCHIP_CHIP_TAG "RK30"
/* MMC/SD IP block */
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_SYS_SDRAM_BASE 0x60000000
#define CONFIG_NR_DRAM_BANKS 1
#define SDRAM_BANK_SIZE (512UL << 20UL)
#define SDRAM_MAX_SIZE (CONFIG_NR_DRAM_BANKS * SDRAM_BANK_SIZE)
#define CONFIG_SPI_FLASH
#define CONFIG_SPI
#define CONFIG_SPI_FLASH_GIGADEVICE
#define CONFIG_SF_DEFAULT_SPEED 20000000
#ifndef CONFIG_SPL_BUILD
/* usb otg */
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_DWC2_OTG
#define CONFIG_USB_GADGET_VBUS_DRAW 0
/* fastboot */
#define CONFIG_CMD_FASTBOOT
#define CONFIG_USB_FUNCTION_FASTBOOT
#define CONFIG_FASTBOOT_FLASH
#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
#define CONFIG_FASTBOOT_BUF_SIZE 0x08000000
/* usb mass storage */
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_GADGET_DOWNLOAD
#define CONFIG_G_DNL_MANUFACTURER "Rockchip"
#define CONFIG_G_DNL_VENDOR_NUM 0x2207
#define CONFIG_G_DNL_PRODUCT_NUM 0x310a
/* usb host */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_ETHER_ASIX
#endif
#define ENV_MEM_LAYOUT_SETTINGS \
"scriptaddr=0x60000000\0" \
"pxefile_addr_r=0x60100000\0" \
"fdt_addr_r=0x61f00000\0" \
"kernel_addr_r=0x62000000\0" \
"ramdisk_addr_r=0x64000000\0"
#include <config_distro_bootcmd.h>
/* Linux fails to load the fdt if it's loaded above 512M on a evb-rk3036 board,
* so limit the fdt reallocation to that */
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_high=0x7fffffff\0" \
"partitions=" PARTS_DEFAULT \
ENV_MEM_LAYOUT_SETTINGS \
BOOTENV
#endif
#define CONFIG_PREBOOT
#endif