mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 19:43:33 +00:00
96fe4f6485
Add function to send mailbox command via SMC to get usercode from SDM. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
539 lines
15 KiB
C
539 lines
15 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (C) 2017-2018, Intel Corporation
|
|
*/
|
|
|
|
#ifndef __INTEL_SMC_H
|
|
#define __INTEL_SMC_H
|
|
|
|
#include <linux/arm-smccc.h>
|
|
#include <linux/bitops.h>
|
|
|
|
/*
|
|
* This file defines the Secure Monitor Call (SMC) message protocol used for
|
|
* service layer driver in normal world (EL1) to communicate with secure
|
|
* monitor software in Secure Monitor Exception Level 3 (EL3).
|
|
*
|
|
* This file is shared with secure firmware (FW) which is out of u-boot tree.
|
|
*
|
|
* An ARM SMC instruction takes a function identifier and up to 6 64-bit
|
|
* register values as arguments, and can return up to 4 64-bit register
|
|
* values. The operation of the secure monitor is determined by the parameter
|
|
* values passed in through registers.
|
|
|
|
* EL1 and EL3 communicates pointer as physical address rather than the
|
|
* virtual address.
|
|
*/
|
|
|
|
/*
|
|
* Functions specified by ARM SMC Calling convention:
|
|
*
|
|
* FAST call executes atomic operations, returns when the requested operation
|
|
* has completed.
|
|
* STD call starts a operation which can be preempted by a non-secure
|
|
* interrupt. The call can return before the requested operation has
|
|
* completed.
|
|
*
|
|
* a0..a7 is used as register names in the descriptions below, on arm32
|
|
* that translates to r0..r7 and on arm64 to w0..w7.
|
|
*/
|
|
|
|
#define INTEL_SIP_SMC_STD_CALL_VAL(func_num) \
|
|
ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_64, \
|
|
ARM_SMCCC_OWNER_SIP, (func_num))
|
|
|
|
#define INTEL_SIP_SMC_FAST_CALL_VAL(func_num) \
|
|
ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \
|
|
ARM_SMCCC_OWNER_SIP, (func_num))
|
|
|
|
/*
|
|
* Return values in INTEL_SIP_SMC_* call
|
|
*
|
|
* INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION:
|
|
* Secure monitor software doesn't recognize the request.
|
|
*
|
|
* INTEL_SIP_SMC_STATUS_OK:
|
|
* SMC call completed successfully,
|
|
* In case of FPGA configuration write operation, it means secure monitor
|
|
* software can accept the next chunk of FPGA configuration data.
|
|
*
|
|
* INTEL_SIP_SMC_STATUS_BUSY:
|
|
* In case of FPGA configuration write operation, it means secure monitor
|
|
* software is still processing previous data & can't accept the next chunk
|
|
* of data. Service driver needs to issue
|
|
* INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE call to query the
|
|
* completed block(s).
|
|
*
|
|
* INTEL_SIP_SMC_STATUS_ERROR:
|
|
* There is error during the SMC call process.
|
|
*
|
|
* INTEL_SIP_SMC_REG_ERROR:
|
|
* There is error during a read or write operation of the protected
|
|
* registers.
|
|
*/
|
|
#define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF
|
|
#define INTEL_SIP_SMC_STATUS_OK 0x0
|
|
#define INTEL_SIP_SMC_STATUS_BUSY 0x1
|
|
#define INTEL_SIP_SMC_STATUS_REJECTED 0x2
|
|
#define INTEL_SIP_SMC_STATUS_ERROR 0x4
|
|
#define INTEL_SIP_SMC_REG_ERROR 0x5
|
|
#define INTEL_SIP_SMC_RSU_ERROR 0x7
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_FPGA_CONFIG_START
|
|
*
|
|
* Sync call used by service driver at EL1 to request the FPGA in EL3 to
|
|
* be prepare to receive a new configuration.
|
|
*
|
|
* Call register usage:
|
|
* a0: INTEL_SIP_SMC_FPGA_CONFIG_START.
|
|
* a1: flag for full or partial configuration
|
|
* 0 full reconfiguration.
|
|
* 1 partial reconfiguration.
|
|
* a2-7: not used.
|
|
*
|
|
* Return status:
|
|
* a0: INTEL_SIP_SMC_STATUS_OK, or INTEL_SIP_SMC_STATUS_ERROR.
|
|
* a1-3: not used.
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START 1
|
|
#define INTEL_SIP_SMC_FPGA_CONFIG_START \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_FPGA_CONFIG_WRITE
|
|
*
|
|
* Async call used by service driver at EL1 to provide FPGA configuration data
|
|
* to secure world.
|
|
*
|
|
* Call register usage:
|
|
* a0: INTEL_SIP_SMC_FPGA_CONFIG_WRITE.
|
|
* a1: 64bit physical address of the configuration data memory block
|
|
* a2: Size of configuration data block.
|
|
* a3-7: not used.
|
|
*
|
|
* Return status:
|
|
* a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY,
|
|
* INTEL_SIP_SMC_STATUS_REJECTED or INTEL_SIP_SMC_STATUS_ERROR.
|
|
* a1: 64bit physical address of 1st completed memory block if any completed
|
|
* block, otherwise zero value.
|
|
* a2: 64bit physical address of 2nd completed memory block if any completed
|
|
* block, otherwise zero value.
|
|
* a3: 64bit physical address of 3rd completed memory block if any completed
|
|
* block, otherwise zero value.
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE 2
|
|
#define INTEL_SIP_SMC_FPGA_CONFIG_WRITE \
|
|
INTEL_SIP_SMC_STD_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE
|
|
*
|
|
* Sync call used by service driver at EL1 to track the completed write
|
|
* transactions. This request is called after INTEL_SIP_SMC_FPGA_CONFIG_WRITE
|
|
* call returns INTEL_SIP_SMC_STATUS_BUSY.
|
|
*
|
|
* Call register usage:
|
|
* a0: INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE.
|
|
* a1-7: not used.
|
|
*
|
|
* Return status:
|
|
* a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY or
|
|
* INTEL_SIP_SMC_STATUS_ERROR.
|
|
* a1: 64bit physical address of 1st completed memory block.
|
|
* a2: 64bit physical address of 2nd completed memory block if
|
|
* any completed block, otherwise zero value.
|
|
* a3: 64bit physical address of 3rd completed memory block if
|
|
* any completed block, otherwise zero value.
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE 3
|
|
#define INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_FPGA_CONFIG_ISDONE
|
|
*
|
|
* Sync call used by service driver at EL1 to inform secure world that all
|
|
* data are sent, to check whether or not the secure world had completed
|
|
* the FPGA configuration process.
|
|
*
|
|
* Call register usage:
|
|
* a0: INTEL_SIP_SMC_FPGA_CONFIG_ISDONE.
|
|
* a1-7: not used.
|
|
*
|
|
* Return status:
|
|
* a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY or
|
|
* INTEL_SIP_SMC_STATUS_ERROR.
|
|
* a1-3: not used.
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE 4
|
|
#define INTEL_SIP_SMC_FPGA_CONFIG_ISDONE \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM
|
|
*
|
|
* Sync call used by service driver at EL1 to query the physical address of
|
|
* memory block reserved by secure monitor software.
|
|
*
|
|
* Call register usage:
|
|
* a0:INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM.
|
|
* a1-7: not used.
|
|
*
|
|
* Return status:
|
|
* a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR.
|
|
* a1: start of physical address of reserved memory block.
|
|
* a2: size of reserved memory block.
|
|
* a3: not used.
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM 5
|
|
#define INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK
|
|
*
|
|
* For SMC loop-back mode only, used for internal integration, debugging
|
|
* or troubleshooting.
|
|
*
|
|
* Call register usage:
|
|
* a0: INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK.
|
|
* a1-7: not used.
|
|
*
|
|
* Return status:
|
|
* a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR.
|
|
* a1-3: not used.
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK 6
|
|
#define INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_REG_READ
|
|
*
|
|
* Read a protected register using SMCCC
|
|
*
|
|
* Call register usage:
|
|
* a0: INTEL_SIP_SMC_REG_READ.
|
|
* a1: register address.
|
|
* a2-7: not used.
|
|
*
|
|
* Return status:
|
|
* a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
|
|
* a1: Value in the register
|
|
* a2-3: not used.
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_REG_READ 7
|
|
#define INTEL_SIP_SMC_REG_READ \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_READ)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_REG_WRITE
|
|
*
|
|
* Write a protected register using SMCCC
|
|
*
|
|
* Call register usage:
|
|
* a0: INTEL_SIP_SMC_REG_WRITE.
|
|
* a1: register address
|
|
* a2: value to program into register.
|
|
* a3-7: not used.
|
|
*
|
|
* Return status:
|
|
* a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
|
|
* a1-3: not used.
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_REG_WRITE 8
|
|
#define INTEL_SIP_SMC_REG_WRITE \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_WRITE)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_FUNCID_REG_UPDATE
|
|
*
|
|
* Update one or more bits in a protected register using a
|
|
* read-modify-write operation.
|
|
*
|
|
* Call register usage:
|
|
* a0: INTEL_SIP_SMC_REG_UPDATE.
|
|
* a1: register address
|
|
* a2: Write Mask.
|
|
* a3: Value to write.
|
|
* a4-7: not used.
|
|
*
|
|
* Return status:
|
|
* a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
|
|
* a1-3: Not used.
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_REG_UPDATE 9
|
|
#define INTEL_SIP_SMC_REG_UPDATE \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_UPDATE)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_RSU_STATUS
|
|
*
|
|
* Sync call used by service driver at EL1 to query the RSU status
|
|
*
|
|
* Call register usage:
|
|
* a0 INTEL_SIP_SMC_RSU_STATUS
|
|
* a1-7 not used
|
|
*
|
|
* Return status
|
|
* a0: Current Image
|
|
* a1: Last Failing Image
|
|
* a2: Version [width 32 bit] | State [width 32 bit]
|
|
* a3: Error details [width 32 bit] | Error location [width 32 bit]
|
|
*
|
|
* Or
|
|
*
|
|
* a0: INTEL_SIP_SMC_RSU_ERROR
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_RSU_STATUS 11
|
|
#define INTEL_SIP_SMC_RSU_STATUS \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_STATUS)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_RSU_UPDATE
|
|
*
|
|
* Sync call used by service driver at EL1 to tell you next reboot is RSU_UPDATE
|
|
*
|
|
* Call register usage:
|
|
* a0 INTEL_SIP_SMC_RSU_UPDATE
|
|
* a1 64bit physical address of the configuration data memory in flash
|
|
* a2-7 not used
|
|
*
|
|
* Return status
|
|
* a0 INTEL_SIP_SMC_STATUS_OK
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_RSU_UPDATE 12
|
|
#define INTEL_SIP_SMC_RSU_UPDATE \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_UPDATE)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_ECC_DBE
|
|
*
|
|
* Sync call used by service driver at EL1 alert EL3 that a Double Bit
|
|
* ECC error has occurred.
|
|
*
|
|
* Call register usage:
|
|
* a0 INTEL_SIP_SMC_ECC_DBE
|
|
* a1 SysManager Double Bit Error value
|
|
* a2-7 not used
|
|
*
|
|
* Return status
|
|
* a0 INTEL_SIP_SMC_STATUS_OK
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_ECC_DBE 13
|
|
#define INTEL_SIP_SMC_ECC_DBE \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_ECC_DBE)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_RSU_NOTIFY
|
|
*
|
|
* Sync call used by service driver at EL1 to report HPS software execution stage
|
|
*
|
|
* Call register usage:
|
|
* a0 INTEL_SIP_SMC_RSU_NOTIFY
|
|
* a1 32bit HPS software execution stage
|
|
* a2-7 not used
|
|
*
|
|
* Return status
|
|
* a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_RSU_NOTIFY 14
|
|
#define INTEL_SIP_SMC_RSU_NOTIFY \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_NOTIFY)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_RSU_RETRY_COUNTER
|
|
*
|
|
* Sync call used by service driver at EL1 to query the RSU retry counter
|
|
*
|
|
* Call register usage:
|
|
* a0 INTEL_SIP_SMC_RSU_RETRY_COUNTER
|
|
* a1-7 not used
|
|
*
|
|
* Return status
|
|
* a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_RSU_ERROR.
|
|
* a1 retry counter
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER 15
|
|
#define INTEL_SIP_SMC_RSU_RETRY_COUNTER \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_RSU_DCMF_VERSION
|
|
*
|
|
* Sync call used by service driver at EL1 to query DCMF version
|
|
*
|
|
* Call register usage:
|
|
* a0 INTEL_SIP_SMC_RSU_DCMF_VERSION
|
|
* a1-7 not used
|
|
*
|
|
* Return status
|
|
* a0 INTEL_SIP_SMC_STATUS_OK
|
|
* a1 dcmf1 version | dcmf0 version
|
|
* a2 dcmf3 version | dcmf2 version
|
|
*
|
|
* Or
|
|
*
|
|
* a0 INTEL_SIP_SMC_RSU_ERROR
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_RSU_DCMF_VERSION 16
|
|
#define INTEL_SIP_SMC_RSU_DCMF_VERSION \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_DCMF_VERSION)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_RSU_COPY_DCMF_VERSION
|
|
*
|
|
* Sync call used by SSBL (EL2) to copy DCMF version to ATF memory
|
|
*
|
|
* Call register usage:
|
|
* a0 INTEL_SIP_SMC_RSU_COPY_DCMF_VERSION
|
|
* a1 dcmf1 version | dcmf0 version
|
|
* a2 dcmf3 version | dcmf2 version
|
|
*
|
|
* Return status
|
|
* a0 INTEL_SIP_SMC_STATUS_OK
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_RSU_COPY_DCMF_VERSION 17
|
|
#define INTEL_SIP_SMC_RSU_COPY_DCMF_VERSION \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_COPY_DCMF_VERSION)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_RSU_MAX_RETRY
|
|
*
|
|
* Sync call used by service driver at EL1 to query max_retry parameter
|
|
*
|
|
* Call register usage:
|
|
* a0 INTEL_SIP_SMC_RSU_MAX_RETRY
|
|
* a1-7 not used
|
|
*
|
|
* Return status
|
|
* a0 INTEL_SIP_SMC_STATUS_OK
|
|
* a1 max_retry
|
|
*
|
|
* Or
|
|
*
|
|
* a0 INTEL_SIP_SMC_RSU_ERROR
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_RSU_MAX_RETRY 18
|
|
#define INTEL_SIP_SMC_RSU_MAX_RETRY \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_MAX_RETRY)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_RSU_COPY_MAX_RETRY
|
|
*
|
|
* Sync call used by SSBL (EL2) to copy RSU 'max retry' to ATF memory
|
|
*
|
|
* Call register usage:
|
|
* a0 INTEL_SIP_SMC_RSU_COPY_MAX_RETRY
|
|
* a1 max retry
|
|
* a2-7 not used
|
|
*
|
|
* Return status
|
|
* a0 INTEL_SIP_SMC_STATUS_OK
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_RSU_COPY_MAX_RETRY 19
|
|
#define INTEL_SIP_SMC_RSU_COPY_MAX_RETRY \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_COPY_MAX_RETRY)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_RSU_DCMF_STATUS
|
|
*
|
|
* Sync call used by service driver at EL1 to query DCMF status
|
|
*
|
|
* Call register usage:
|
|
* a0 INTEL_SIP_SMC_RSU_DCMF_STATUS
|
|
* a1-7 not used
|
|
*
|
|
* Return status
|
|
* a0 INTEL_SIP_SMC_STATUS_OK
|
|
* a1 dcmf3 status | dcmf2 status | dcmf1 status | dcmf0 status
|
|
*
|
|
* Or
|
|
*
|
|
* a0 INTEL_SIP_SMC_RSU_ERROR
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_RSU_DCMF_STATUS 20
|
|
#define INTEL_SIP_SMC_RSU_DCMF_STATUS \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_DCMF_STATUS)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_RSU_COPY_DCMF_STATUS
|
|
*
|
|
* Sync call used by SSBL (EL2) to copy RSU 'dcmf status' to ATF memory
|
|
*
|
|
* Call register usage:
|
|
* a0 INTEL_SIP_SMC_RSU_COPY_DCMF_STATUS
|
|
* a1 dcmf status
|
|
* a2-7 not used
|
|
*
|
|
* Return status
|
|
* a0 INTEL_SIP_SMC_STATUS_OK
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_RSU_COPY_DCMF_STATUS 21
|
|
#define INTEL_SIP_SMC_RSU_COPY_DCMF_STATUS \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_COPY_DCMF_STATUS)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_HPS_SET_BRIDGES
|
|
*
|
|
* Enable/disable the SoC FPGA bridges
|
|
*
|
|
* Call register usage:
|
|
* a0 INTEL_SIP_SMC_HPS_SET_BRIDGES
|
|
* a1 Set bridges status:
|
|
* 0 - Disable
|
|
* 1 - Enable
|
|
* a2-7 not used
|
|
*
|
|
* Return status
|
|
* a0 INTEL_SIP_SMC_STATUS_OK
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_HPS_SET_BRIDGES 50
|
|
#define INTEL_SIP_SMC_HPS_SET_BRIDGES \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_HPS_SET_BRIDGES)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_MBOX_SEND_CMD
|
|
*
|
|
* Send mailbox command to SDM
|
|
*
|
|
* Call register usage:
|
|
* a0 INTEL_SIP_SMC_MBOX_SEND_CMD
|
|
* a1 Mailbox command
|
|
* a2 64bit physical address pointer to command's arguments
|
|
* a3 Length of the argument
|
|
* a4 Urgent command:
|
|
* 0 - Disable
|
|
* 1 - Enable
|
|
* a5 64bit physical address pointer to a buffer for receiving responses
|
|
* a6 Length of the buffer
|
|
*
|
|
* Return status
|
|
* a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR
|
|
* a1 Status of mailbox response
|
|
* a2 Received length in the buffer
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_MBOX_SEND_CMD 60
|
|
#define INTEL_SIP_SMC_MBOX_SEND_CMD \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_MBOX_SEND_CMD)
|
|
|
|
/*
|
|
* Request INTEL_SIP_SMC_GET_USERCODE
|
|
*
|
|
* Send mailbox command to get usercode from SDM
|
|
*
|
|
* Call register usage:
|
|
* a0 INTEL_SIP_SMC_GET_USERCODE
|
|
* a1-7 not used.
|
|
*
|
|
* Return status
|
|
* a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR
|
|
* a1 User code
|
|
* a2-3 not used.
|
|
*/
|
|
#define INTEL_SIP_SMC_FUNCID_GET_USERCODE 61
|
|
#define INTEL_SIP_SMC_GET_USERCODE \
|
|
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_GET_USERCODE)
|
|
|
|
#endif
|