mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-22 03:03:05 +00:00
eaf6ea6a1d
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
39 lines
1 KiB
C
39 lines
1 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Configuation settings for the SAM9X60EK board.
|
|
*
|
|
* Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
|
|
*
|
|
* Author: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
|
|
*/
|
|
|
|
#ifndef __CONFIG_H__
|
|
#define __CONFIG_H__
|
|
|
|
/* ARM asynchronous clock */
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
|
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* 24 MHz crystal */
|
|
|
|
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
|
#define CONFIG_USART_ID 0 /* ignored in arm */
|
|
|
|
/*
|
|
* define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0)
|
|
* NB: in this case, USB 1.1 devices won't be recognized.
|
|
*/
|
|
|
|
/* SDRAM */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x20000000
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x10000000 /* 256 megs */
|
|
|
|
/* NAND flash */
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_MASK_ALE BIT(21)
|
|
#define CONFIG_SYS_NAND_MASK_CLE BIT(22)
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4
|
|
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5
|
|
#endif
|
|
|
|
#endif
|