mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-29 16:10:58 +00:00
402d17fc4c
The same places that check for CONFIG_OMAP44XX need to check for CONFIG_AM33XX as we share the same i2c block. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Heiko Schocher <hs@denx.de>
472 lines
11 KiB
C
472 lines
11 KiB
C
/*
|
|
* Basic I2C functions
|
|
*
|
|
* Copyright (c) 2004 Texas Instruments
|
|
*
|
|
* This package is free software; you can redistribute it and/or
|
|
* modify it under the terms of the license found in the file
|
|
* named COPYING that should have accompanied this file.
|
|
*
|
|
* THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
|
|
*
|
|
* Author: Jian Zhang jzhang@ti.com, Texas Instruments
|
|
*
|
|
* Copyright (c) 2003 Wolfgang Denk, wd@denx.de
|
|
* Rewritten to fit into the current U-Boot framework
|
|
*
|
|
* Adapted for OMAP2420 I2C, r-woodruff2@ti.com
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#include <asm/arch/i2c.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "omap24xx_i2c.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define I2C_TIMEOUT 1000
|
|
|
|
static void wait_for_bb(void);
|
|
static u16 wait_for_pin(void);
|
|
static void flush_fifo(void);
|
|
|
|
/*
|
|
* For SPL boot some boards need i2c before SDRAM is initialised so force
|
|
* variables to live in SRAM
|
|
*/
|
|
static struct i2c __attribute__((section (".data"))) *i2c_base =
|
|
(struct i2c *)I2C_DEFAULT_BASE;
|
|
static unsigned int __attribute__((section (".data"))) bus_initialized[I2C_BUS_MAX] =
|
|
{ [0 ... (I2C_BUS_MAX-1)] = 0 };
|
|
static unsigned int __attribute__((section (".data"))) current_bus = 0;
|
|
|
|
void i2c_init(int speed, int slaveadd)
|
|
{
|
|
int psc, fsscll, fssclh;
|
|
int hsscll = 0, hssclh = 0;
|
|
u32 scll, sclh;
|
|
int timeout = I2C_TIMEOUT;
|
|
|
|
/* Only handle standard, fast and high speeds */
|
|
if ((speed != OMAP_I2C_STANDARD) &&
|
|
(speed != OMAP_I2C_FAST_MODE) &&
|
|
(speed != OMAP_I2C_HIGH_SPEED)) {
|
|
printf("Error : I2C unsupported speed %d\n", speed);
|
|
return;
|
|
}
|
|
|
|
psc = I2C_IP_CLK / I2C_INTERNAL_SAMPLING_CLK;
|
|
psc -= 1;
|
|
if (psc < I2C_PSC_MIN) {
|
|
printf("Error : I2C unsupported prescalar %d\n", psc);
|
|
return;
|
|
}
|
|
|
|
if (speed == OMAP_I2C_HIGH_SPEED) {
|
|
/* High speed */
|
|
|
|
/* For first phase of HS mode */
|
|
fsscll = fssclh = I2C_INTERNAL_SAMPLING_CLK /
|
|
(2 * OMAP_I2C_FAST_MODE);
|
|
|
|
fsscll -= I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM;
|
|
fssclh -= I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM;
|
|
if (((fsscll < 0) || (fssclh < 0)) ||
|
|
((fsscll > 255) || (fssclh > 255))) {
|
|
puts("Error : I2C initializing first phase clock\n");
|
|
return;
|
|
}
|
|
|
|
/* For second phase of HS mode */
|
|
hsscll = hssclh = I2C_INTERNAL_SAMPLING_CLK / (2 * speed);
|
|
|
|
hsscll -= I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM;
|
|
hssclh -= I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM;
|
|
if (((fsscll < 0) || (fssclh < 0)) ||
|
|
((fsscll > 255) || (fssclh > 255))) {
|
|
puts("Error : I2C initializing second phase clock\n");
|
|
return;
|
|
}
|
|
|
|
scll = (unsigned int)hsscll << 8 | (unsigned int)fsscll;
|
|
sclh = (unsigned int)hssclh << 8 | (unsigned int)fssclh;
|
|
|
|
} else {
|
|
/* Standard and fast speed */
|
|
fsscll = fssclh = I2C_INTERNAL_SAMPLING_CLK / (2 * speed);
|
|
|
|
fsscll -= I2C_FASTSPEED_SCLL_TRIM;
|
|
fssclh -= I2C_FASTSPEED_SCLH_TRIM;
|
|
if (((fsscll < 0) || (fssclh < 0)) ||
|
|
((fsscll > 255) || (fssclh > 255))) {
|
|
puts("Error : I2C initializing clock\n");
|
|
return;
|
|
}
|
|
|
|
scll = (unsigned int)fsscll;
|
|
sclh = (unsigned int)fssclh;
|
|
}
|
|
|
|
if (readw(&i2c_base->con) & I2C_CON_EN) {
|
|
writew(0, &i2c_base->con);
|
|
udelay(50000);
|
|
}
|
|
|
|
writew(0x2, &i2c_base->sysc); /* for ES2 after soft reset */
|
|
udelay(1000);
|
|
|
|
writew(I2C_CON_EN, &i2c_base->con);
|
|
while (!(readw(&i2c_base->syss) & I2C_SYSS_RDONE) && timeout--) {
|
|
if (timeout <= 0) {
|
|
puts("ERROR: Timeout in soft-reset\n");
|
|
return;
|
|
}
|
|
udelay(1000);
|
|
}
|
|
|
|
writew(0, &i2c_base->con);
|
|
writew(psc, &i2c_base->psc);
|
|
writew(scll, &i2c_base->scll);
|
|
writew(sclh, &i2c_base->sclh);
|
|
|
|
/* own address */
|
|
writew(slaveadd, &i2c_base->oa);
|
|
writew(I2C_CON_EN, &i2c_base->con);
|
|
|
|
/* have to enable intrrupts or OMAP i2c module doesn't work */
|
|
writew(I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
|
|
I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
|
|
udelay(1000);
|
|
flush_fifo();
|
|
writew(0xFFFF, &i2c_base->stat);
|
|
writew(0, &i2c_base->cnt);
|
|
|
|
if (gd->flags & GD_FLG_RELOC)
|
|
bus_initialized[current_bus] = 1;
|
|
}
|
|
|
|
static int i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value)
|
|
{
|
|
int i2c_error = 0;
|
|
u16 status;
|
|
|
|
/* wait until bus not busy */
|
|
wait_for_bb();
|
|
|
|
/* one byte only */
|
|
writew(1, &i2c_base->cnt);
|
|
/* set slave address */
|
|
writew(devaddr, &i2c_base->sa);
|
|
/* no stop bit needed here */
|
|
writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT |
|
|
I2C_CON_TRX, &i2c_base->con);
|
|
|
|
/* send register offset */
|
|
while (1) {
|
|
status = wait_for_pin();
|
|
if (status == 0 || status & I2C_STAT_NACK) {
|
|
i2c_error = 1;
|
|
goto read_exit;
|
|
}
|
|
if (status & I2C_STAT_XRDY) {
|
|
/* Important: have to use byte access */
|
|
writeb(regoffset, &i2c_base->data);
|
|
writew(I2C_STAT_XRDY, &i2c_base->stat);
|
|
}
|
|
if (status & I2C_STAT_ARDY) {
|
|
writew(I2C_STAT_ARDY, &i2c_base->stat);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* set slave address */
|
|
writew(devaddr, &i2c_base->sa);
|
|
/* read one byte from slave */
|
|
writew(1, &i2c_base->cnt);
|
|
/* need stop bit here */
|
|
writew(I2C_CON_EN | I2C_CON_MST |
|
|
I2C_CON_STT | I2C_CON_STP,
|
|
&i2c_base->con);
|
|
|
|
/* receive data */
|
|
while (1) {
|
|
status = wait_for_pin();
|
|
if (status == 0 || status & I2C_STAT_NACK) {
|
|
i2c_error = 1;
|
|
goto read_exit;
|
|
}
|
|
if (status & I2C_STAT_RRDY) {
|
|
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
|
|
defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX)
|
|
*value = readb(&i2c_base->data);
|
|
#else
|
|
*value = readw(&i2c_base->data);
|
|
#endif
|
|
writew(I2C_STAT_RRDY, &i2c_base->stat);
|
|
}
|
|
if (status & I2C_STAT_ARDY) {
|
|
writew(I2C_STAT_ARDY, &i2c_base->stat);
|
|
break;
|
|
}
|
|
}
|
|
|
|
read_exit:
|
|
flush_fifo();
|
|
writew(0xFFFF, &i2c_base->stat);
|
|
writew(0, &i2c_base->cnt);
|
|
return i2c_error;
|
|
}
|
|
|
|
static void flush_fifo(void)
|
|
{ u16 stat;
|
|
|
|
/* note: if you try and read data when its not there or ready
|
|
* you get a bus error
|
|
*/
|
|
while (1) {
|
|
stat = readw(&i2c_base->stat);
|
|
if (stat == I2C_STAT_RRDY) {
|
|
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
|
|
defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX)
|
|
readb(&i2c_base->data);
|
|
#else
|
|
readw(&i2c_base->data);
|
|
#endif
|
|
writew(I2C_STAT_RRDY, &i2c_base->stat);
|
|
udelay(1000);
|
|
} else
|
|
break;
|
|
}
|
|
}
|
|
|
|
int i2c_probe(uchar chip)
|
|
{
|
|
u16 status;
|
|
int res = 1; /* default = fail */
|
|
|
|
if (chip == readw(&i2c_base->oa))
|
|
return res;
|
|
|
|
/* wait until bus not busy */
|
|
wait_for_bb();
|
|
|
|
/* try to read one byte */
|
|
writew(1, &i2c_base->cnt);
|
|
/* set slave address */
|
|
writew(chip, &i2c_base->sa);
|
|
/* stop bit needed here */
|
|
writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, &i2c_base->con);
|
|
|
|
while (1) {
|
|
status = wait_for_pin();
|
|
if (status == 0 || status & I2C_STAT_AL) {
|
|
res = 1;
|
|
goto probe_exit;
|
|
}
|
|
if (status & I2C_STAT_NACK) {
|
|
res = 1;
|
|
writew(0xff, &i2c_base->stat);
|
|
writew (readw (&i2c_base->con) | I2C_CON_STP, &i2c_base->con);
|
|
wait_for_bb ();
|
|
break;
|
|
}
|
|
if (status & I2C_STAT_ARDY) {
|
|
writew(I2C_STAT_ARDY, &i2c_base->stat);
|
|
break;
|
|
}
|
|
if (status & I2C_STAT_RRDY) {
|
|
res = 0;
|
|
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
|
|
defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX)
|
|
readb(&i2c_base->data);
|
|
#else
|
|
readw(&i2c_base->data);
|
|
#endif
|
|
writew(I2C_STAT_RRDY, &i2c_base->stat);
|
|
}
|
|
}
|
|
|
|
probe_exit:
|
|
flush_fifo();
|
|
/* don't allow any more data in... we don't want it. */
|
|
writew(0, &i2c_base->cnt);
|
|
writew(0xFFFF, &i2c_base->stat);
|
|
return res;
|
|
}
|
|
|
|
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
|
|
{
|
|
int i;
|
|
|
|
if (alen > 1) {
|
|
printf("I2C read: addr len %d not supported\n", alen);
|
|
return 1;
|
|
}
|
|
|
|
if (addr + len > 256) {
|
|
puts("I2C read: address out of range\n");
|
|
return 1;
|
|
}
|
|
|
|
for (i = 0; i < len; i++) {
|
|
if (i2c_read_byte(chip, addr + i, &buffer[i])) {
|
|
puts("I2C read: I/O error\n");
|
|
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
|
|
{
|
|
int i;
|
|
u16 status;
|
|
int i2c_error = 0;
|
|
|
|
if (alen > 1) {
|
|
printf("I2C write: addr len %d not supported\n", alen);
|
|
return 1;
|
|
}
|
|
|
|
if (addr + len > 256) {
|
|
printf("I2C write: address 0x%x + 0x%x out of range\n",
|
|
addr, len);
|
|
return 1;
|
|
}
|
|
|
|
/* wait until bus not busy */
|
|
wait_for_bb();
|
|
|
|
/* start address phase - will write regoffset + len bytes data */
|
|
/* TODO consider case when !CONFIG_OMAP243X/34XX/44XX */
|
|
writew(alen + len, &i2c_base->cnt);
|
|
/* set slave address */
|
|
writew(chip, &i2c_base->sa);
|
|
/* stop bit needed here */
|
|
writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
|
|
I2C_CON_STP, &i2c_base->con);
|
|
|
|
/* Send address byte */
|
|
status = wait_for_pin();
|
|
|
|
if (status == 0 || status & I2C_STAT_NACK) {
|
|
i2c_error = 1;
|
|
printf("error waiting for i2c address ACK (status=0x%x)\n",
|
|
status);
|
|
goto write_exit;
|
|
}
|
|
|
|
if (status & I2C_STAT_XRDY) {
|
|
writeb(addr & 0xFF, &i2c_base->data);
|
|
writew(I2C_STAT_XRDY, &i2c_base->stat);
|
|
} else {
|
|
i2c_error = 1;
|
|
printf("i2c bus not ready for transmit (status=0x%x)\n",
|
|
status);
|
|
goto write_exit;
|
|
}
|
|
|
|
/* address phase is over, now write data */
|
|
for (i = 0; i < len; i++) {
|
|
status = wait_for_pin();
|
|
|
|
if (status == 0 || status & I2C_STAT_NACK) {
|
|
i2c_error = 1;
|
|
printf("i2c error waiting for data ACK (status=0x%x)\n",
|
|
status);
|
|
goto write_exit;
|
|
}
|
|
|
|
if (status & I2C_STAT_XRDY) {
|
|
writeb(buffer[i], &i2c_base->data);
|
|
writew(I2C_STAT_XRDY, &i2c_base->stat);
|
|
} else {
|
|
i2c_error = 1;
|
|
printf("i2c bus not ready for Tx (i=%d)\n", i);
|
|
goto write_exit;
|
|
}
|
|
}
|
|
|
|
write_exit:
|
|
flush_fifo();
|
|
writew(0xFFFF, &i2c_base->stat);
|
|
return i2c_error;
|
|
}
|
|
|
|
static void wait_for_bb(void)
|
|
{
|
|
int timeout = I2C_TIMEOUT;
|
|
u16 stat;
|
|
|
|
writew(0xFFFF, &i2c_base->stat); /* clear current interrupts...*/
|
|
while ((stat = readw(&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
|
|
writew(stat, &i2c_base->stat);
|
|
udelay(1000);
|
|
}
|
|
|
|
if (timeout <= 0) {
|
|
printf("timed out in wait_for_bb: I2C_STAT=%x\n",
|
|
readw(&i2c_base->stat));
|
|
}
|
|
writew(0xFFFF, &i2c_base->stat); /* clear delayed stuff*/
|
|
}
|
|
|
|
static u16 wait_for_pin(void)
|
|
{
|
|
u16 status;
|
|
int timeout = I2C_TIMEOUT;
|
|
|
|
do {
|
|
udelay(1000);
|
|
status = readw(&i2c_base->stat);
|
|
} while (!(status &
|
|
(I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY |
|
|
I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK |
|
|
I2C_STAT_AL)) && timeout--);
|
|
|
|
if (timeout <= 0) {
|
|
printf("timed out in wait_for_pin: I2C_STAT=%x\n",
|
|
readw(&i2c_base->stat));
|
|
writew(0xFFFF, &i2c_base->stat);
|
|
status = 0;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
int i2c_set_bus_num(unsigned int bus)
|
|
{
|
|
if ((bus < 0) || (bus >= I2C_BUS_MAX)) {
|
|
printf("Bad bus: %d\n", bus);
|
|
return -1;
|
|
}
|
|
|
|
#if I2C_BUS_MAX == 3
|
|
if (bus == 2)
|
|
i2c_base = (struct i2c *)I2C_BASE3;
|
|
else
|
|
#endif
|
|
if (bus == 1)
|
|
i2c_base = (struct i2c *)I2C_BASE2;
|
|
else
|
|
i2c_base = (struct i2c *)I2C_BASE1;
|
|
|
|
current_bus = bus;
|
|
|
|
if (!bus_initialized[current_bus])
|
|
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int i2c_get_bus_num(void)
|
|
{
|
|
return (int) current_bus;
|
|
}
|