u-boot/include/power/pca9450.h
Sébastien Szymanski eefd93e7f8 power: pmic_pca9450: fix PCA9450A I2C address
Quoting Ye Li from NXP:

    "We have confirmed with PMIC team, 0x35 is used only on early chips
    and not used any more. 0x25 is the final address."

Fix it by merging power_pca9450a_init and power_pca9450b_init into one
function power_pca9450_init.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
2020-07-16 11:20:14 +02:00

59 lines
1.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2019 NXP
*/
#ifndef PCA9450_H_
#define PCA9450_H_
#define PCA9450_REGULATOR_DRIVER "pca9450_regulator"
enum {
PCA9450_REG_DEV_ID = 0x00,
PCA9450_INT1 = 0x01,
PCA9450_INT1_MSK = 0x02,
PCA9450_STATUS1 = 0x03,
PCA9450_STATUS2 = 0x04,
PCA9450_PWRON_STAT = 0x05,
PCA9450_SW_RST = 0x06,
PCA9450_PWR_CTRL = 0x07,
PCA9450_RESET_CTRL = 0x08,
PCA9450_CONFIG1 = 0x09,
PCA9450_CONFIG2 = 0x0A,
PCA9450_BUCK123_DVS = 0x0C,
PCA9450_BUCK1OUT_LIMIT = 0x0D,
PCA9450_BUCK2OUT_LIMIT = 0x0E,
PCA9450_BUCK3OUT_LIMIT = 0x0F,
PCA9450_BUCK1CTRL = 0x10,
PCA9450_BUCK1OUT_DVS0 = 0x11,
PCA9450_BUCK1OUT_DVS1 = 0x12,
PCA9450_BUCK2CTRL = 0x13,
PCA9450_BUCK2OUT_DVS0 = 0x14,
PCA9450_BUCK2OUT_DVS1 = 0x15,
PCA9450_BUCK3CTRL = 0x16,
PCA9450_BUCK3OUT_DVS0 = 0x17,
PCA9450_BUCK3OUT_DVS1 = 0x18,
PCA9450_BUCK4CTRL = 0x19,
PCA9450_BUCK4OUT = 0x1A,
PCA9450_BUCK5CTRL = 0x1B,
PCA9450_BUCK5OUT = 0x1C,
PCA9450_BUCK6CTRL = 0x1D,
PCA9450_BUCK6OUT = 0x1E,
PCA9450_LDO_AD_CTRL = 0x20,
PCA9450_LDO1CTRL = 0x21,
PCA9450_LDO2CTRL = 0x22,
PCA9450_LDO3CTRL = 0x23,
PCA9450_LDO4CTRL = 0x24,
PCA9450_LDO5CTRL_L = 0x25,
PCA9450_LDO5CTRL_H = 0x26,
PCA9450_LOADSW_CTRL = 0x2A,
PCA9450_VRFLT1_STS = 0x2B,
PCA9450_VRFLT2_STS = 0x2C,
PCA9450_VRFLT1_MASK = 0x2D,
PCA9450_VRFLT2_MASK = 0x2E,
PCA9450_REG_NUM,
};
int power_pca9450_init(unsigned char bus);
#endif