mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
33846df28f
The NAND flash on the TQM8548_BE modules requires a short delay after running the UPM pattern like the MPC8360ERDK board does. The TQM8548_BE requires a further short delay after writing out a buffer. Normally the R/B pin should be checked, but it's not connected on the TQM8548_BE. The corresponding Linux FSL UPM driver uses similar delay points at the same locations. To manage these extra delays in a more general way, I introduced the "wait_flags" field allowing the board-specific driver to specify various types of extra delay. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
92 lines
2.7 KiB
C
92 lines
2.7 KiB
C
/*
|
|
* MPC8360E-RDK support for the NAND on FSL UPM
|
|
*
|
|
* Copyright (C) 2007 MontaVista Software, Inc.
|
|
* Anton Vorontsov <avorontsov@ru.mvista.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/immap_83xx.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/fsl_upm.h>
|
|
#include <nand.h>
|
|
|
|
static struct immap *im = (struct immap *)CONFIG_SYS_IMMR;
|
|
|
|
static const u32 upm_array[] = {
|
|
0x0ff03c30, 0x0ff03c30, 0x0ff03c34, 0x0ff33c30, /* Words 0 to 3 */
|
|
0xfff33c31, 0xfffffc30, 0xfffffc30, 0xfffffc30, /* Words 4 to 7 */
|
|
0x0faf3c30, 0x0faf3c30, 0x0faf3c30, 0x0fff3c34, /* Words 8 to 11 */
|
|
0xffff3c31, 0xfffffc30, 0xfffffc30, 0xfffffc30, /* Words 12 to 15 */
|
|
0x0fa3fc30, 0x0fa3fc30, 0x0fa3fc30, 0x0ff3fc34, /* Words 16 to 19 */
|
|
0xfff3fc31, 0xfffffc30, 0xfffffc30, 0xfffffc30, /* Words 20 to 23 */
|
|
0x0ff33c30, 0x0fa33c30, 0x0fa33c34, 0x0ff33c30, /* Words 24 to 27 */
|
|
0xfff33c31, 0xfff0fc30, 0xfff0fc30, 0xfff0fc30, /* Words 28 to 31 */
|
|
0xfff3fc30, 0xfff3fc30, 0xfff6fc30, 0xfffcfc30, /* Words 32 to 35 */
|
|
0xfffcfc30, 0xfffcfc30, 0xfffcfc30, 0xfffcfc30, /* Words 36 to 39 */
|
|
0xfffcfc30, 0xfffcfc30, 0xfffcfc30, 0xfffcfc30, /* Words 40 to 43 */
|
|
0xfffdfc30, 0xfffffc30, 0xfffffc30, 0xfffffc31, /* Words 44 to 47 */
|
|
0xfffffc30, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 48 to 51 */
|
|
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 52 to 55 */
|
|
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 56 to 59 */
|
|
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 60 to 63 */
|
|
};
|
|
|
|
static void upm_setup(struct fsl_upm *upm)
|
|
{
|
|
int i;
|
|
|
|
/* write upm array */
|
|
out_be32(upm->mxmr, MxMR_OP_WARR);
|
|
|
|
for (i = 0; i < 64; i++) {
|
|
out_be32(upm->mdr, upm_array[i]);
|
|
out_8(upm->io_addr, 0x0);
|
|
}
|
|
|
|
/* normal operation */
|
|
out_be32(upm->mxmr, MxMR_OP_NORM);
|
|
while (in_be32(upm->mxmr) != MxMR_OP_NORM)
|
|
eieio();
|
|
}
|
|
|
|
static int dev_ready(int chip_nr)
|
|
{
|
|
if (in_be32(&im->qepio.ioport[4].pdat) & 0x00002000) {
|
|
debug("nand ready\n");
|
|
return 1;
|
|
}
|
|
|
|
debug("nand busy\n");
|
|
return 0;
|
|
}
|
|
|
|
static struct fsl_upm_nand fun = {
|
|
.upm = {
|
|
.io_addr = (void *)CONFIG_SYS_NAND_BASE,
|
|
},
|
|
.width = 8,
|
|
.upm_cmd_offset = 8,
|
|
.upm_addr_offset = 16,
|
|
.dev_ready = dev_ready,
|
|
.wait_flags = FSL_UPM_WAIT_RUN_PATTERN,
|
|
.chip_delay = 50,
|
|
};
|
|
|
|
int board_nand_init(struct nand_chip *nand)
|
|
{
|
|
fun.upm.mxmr = &im->lbus.mamr;
|
|
fun.upm.mdr = &im->lbus.mdr;
|
|
fun.upm.mar = &im->lbus.mar;
|
|
|
|
upm_setup(&fun.upm);
|
|
|
|
return fsl_upm_nand_init(nand, &fun);
|
|
}
|