mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-18 01:03:05 +00:00
eac3bbe5d8
Add QSPI driver code for the Microchip PolarFire SoC. This driver supports the QSPI standard, dual and quad mode interfaces. Co-developed-by: Naga Sureshkumar Relli <nagasuresh.relli@microchip.com> Signed-off-by: Naga Sureshkumar Relli <nagasuresh.relli@microchip.com> Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
505 lines
14 KiB
C
505 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2022 Microchip Technology Inc.
|
|
* Padmarao Begari <padmarao.begari@microchip.com>
|
|
* Naga Sureshkumar Relli <nagasuresh.relli@microchip.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <spi-mem.h>
|
|
#include <asm/io.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/types.h>
|
|
#include <linux/sizes.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* QSPI Control register mask defines
|
|
*/
|
|
#define CONTROL_ENABLE BIT(0)
|
|
#define CONTROL_MASTER BIT(1)
|
|
#define CONTROL_XIP BIT(2)
|
|
#define CONTROL_XIPADDR BIT(3)
|
|
#define CONTROL_CLKIDLE BIT(10)
|
|
#define CONTROL_SAMPLE_MASK GENMASK(12, 11)
|
|
#define CONTROL_MODE0 BIT(13)
|
|
#define CONTROL_MODE12_MASK GENMASK(15, 14)
|
|
#define CONTROL_MODE12_EX_RO BIT(14)
|
|
#define CONTROL_MODE12_EX_RW BIT(15)
|
|
#define CONTROL_MODE12_FULL GENMASK(15, 14)
|
|
#define CONTROL_FLAGSX4 BIT(16)
|
|
#define CONTROL_CLKRATE_MASK GENMASK(27, 24)
|
|
#define CONTROL_CLKRATE_SHIFT 24
|
|
|
|
/*
|
|
* QSPI Frames register mask defines
|
|
*/
|
|
#define FRAMES_TOTALBYTES_MASK GENMASK(15, 0)
|
|
#define FRAMES_CMDBYTES_MASK GENMASK(24, 16)
|
|
#define FRAMES_CMDBYTES_SHIFT 16
|
|
#define FRAMES_SHIFT 25
|
|
#define FRAMES_IDLE_MASK GENMASK(29, 26)
|
|
#define FRAMES_IDLE_SHIFT 26
|
|
#define FRAMES_FLAGBYTE BIT(30)
|
|
#define FRAMES_FLAGWORD BIT(31)
|
|
|
|
/*
|
|
* QSPI Interrupt Enable register mask defines
|
|
*/
|
|
#define IEN_TXDONE BIT(0)
|
|
#define IEN_RXDONE BIT(1)
|
|
#define IEN_RXAVAILABLE BIT(2)
|
|
#define IEN_TXAVAILABLE BIT(3)
|
|
#define IEN_RXFIFOEMPTY BIT(4)
|
|
#define IEN_TXFIFOFULL BIT(5)
|
|
|
|
/*
|
|
* QSPI Status register mask defines
|
|
*/
|
|
#define STATUS_TXDONE BIT(0)
|
|
#define STATUS_RXDONE BIT(1)
|
|
#define STATUS_RXAVAILABLE BIT(2)
|
|
#define STATUS_TXAVAILABLE BIT(3)
|
|
#define STATUS_RXFIFOEMPTY BIT(4)
|
|
#define STATUS_TXFIFOFULL BIT(5)
|
|
#define STATUS_READY BIT(7)
|
|
#define STATUS_FLAGSX4 BIT(8)
|
|
#define STATUS_MASK GENMASK(8, 0)
|
|
|
|
#define BYTESUPPER_MASK GENMASK(31, 16)
|
|
#define BYTESLOWER_MASK GENMASK(15, 0)
|
|
|
|
#define MAX_DIVIDER 16
|
|
#define MIN_DIVIDER 0
|
|
#define MAX_DATA_CMD_LEN 256
|
|
|
|
/* QSPI ready time out value */
|
|
#define TIMEOUT_MS (1000 * 500)
|
|
|
|
/*
|
|
* QSPI Register offsets.
|
|
*/
|
|
#define REG_CONTROL (0x00)
|
|
#define REG_FRAMES (0x04)
|
|
#define REG_IEN (0x0c)
|
|
#define REG_STATUS (0x10)
|
|
#define REG_DIRECT_ACCESS (0x14)
|
|
#define REG_UPPER_ACCESS (0x18)
|
|
#define REG_RX_DATA (0x40)
|
|
#define REG_TX_DATA (0x44)
|
|
#define REG_X4_RX_DATA (0x48)
|
|
#define REG_X4_TX_DATA (0x4c)
|
|
#define REG_FRAMESUP (0x50)
|
|
|
|
/**
|
|
* struct mchp_coreqspi - Defines qspi driver instance
|
|
* @regs: Address of the QSPI controller registers
|
|
* @freq: QSPI Input frequency
|
|
* @txbuf: TX buffer
|
|
* @rxbuf: RX buffer
|
|
* @tx_len: Number of bytes left to transfer
|
|
* @rx_len: Number of bytes left to receive
|
|
*/
|
|
struct mchp_coreqspi {
|
|
void __iomem *regs;
|
|
u32 freq;
|
|
u8 *txbuf;
|
|
u8 *rxbuf;
|
|
int tx_len;
|
|
int rx_len;
|
|
};
|
|
|
|
static void mchp_coreqspi_init_hw(struct mchp_coreqspi *qspi)
|
|
{
|
|
u32 control;
|
|
|
|
control = CONTROL_CLKIDLE | CONTROL_ENABLE;
|
|
|
|
writel(control, qspi->regs + REG_CONTROL);
|
|
writel(0, qspi->regs + REG_IEN);
|
|
}
|
|
|
|
static inline void mchp_coreqspi_read_op(struct mchp_coreqspi *qspi)
|
|
{
|
|
u32 control, data;
|
|
|
|
if (!qspi->rx_len)
|
|
return;
|
|
|
|
control = readl(qspi->regs + REG_CONTROL);
|
|
|
|
/*
|
|
* Read 4-bytes from the SPI FIFO in single transaction and then read
|
|
* the reamaining data byte wise.
|
|
*/
|
|
control |= CONTROL_FLAGSX4;
|
|
writel(control, qspi->regs + REG_CONTROL);
|
|
|
|
while (qspi->rx_len >= 4) {
|
|
while (readl(qspi->regs + REG_STATUS) & STATUS_RXFIFOEMPTY)
|
|
;
|
|
data = readl(qspi->regs + REG_X4_RX_DATA);
|
|
*(u32 *)qspi->rxbuf = data;
|
|
qspi->rxbuf += 4;
|
|
qspi->rx_len -= 4;
|
|
}
|
|
|
|
control &= ~CONTROL_FLAGSX4;
|
|
writel(control, qspi->regs + REG_CONTROL);
|
|
|
|
while (qspi->rx_len--) {
|
|
while (readl(qspi->regs + REG_STATUS) & STATUS_RXFIFOEMPTY)
|
|
;
|
|
data = readl(qspi->regs + REG_RX_DATA);
|
|
*qspi->rxbuf++ = (data & 0xFF);
|
|
}
|
|
}
|
|
|
|
static inline void mchp_coreqspi_write_op(struct mchp_coreqspi *qspi, bool word)
|
|
{
|
|
u32 control, data;
|
|
|
|
control = readl(qspi->regs + REG_CONTROL);
|
|
control |= CONTROL_FLAGSX4;
|
|
writel(control, qspi->regs + REG_CONTROL);
|
|
|
|
while (qspi->tx_len >= 4) {
|
|
while (readl(qspi->regs + REG_STATUS) & STATUS_TXFIFOFULL)
|
|
;
|
|
data = *(u32 *)qspi->txbuf;
|
|
qspi->txbuf += 4;
|
|
qspi->tx_len -= 4;
|
|
writel(data, qspi->regs + REG_X4_TX_DATA);
|
|
}
|
|
|
|
control &= ~CONTROL_FLAGSX4;
|
|
writel(control, qspi->regs + REG_CONTROL);
|
|
|
|
while (qspi->tx_len--) {
|
|
while (readl(qspi->regs + REG_STATUS) & STATUS_TXFIFOFULL)
|
|
;
|
|
data = *qspi->txbuf++;
|
|
writel(data, qspi->regs + REG_TX_DATA);
|
|
}
|
|
}
|
|
|
|
static inline void mchp_coreqspi_config_op(struct mchp_coreqspi *qspi,
|
|
const struct spi_mem_op *op)
|
|
{
|
|
u32 idle_cycles = 0;
|
|
int total_bytes, cmd_bytes, frames, ctrl;
|
|
|
|
cmd_bytes = op->cmd.nbytes + op->addr.nbytes;
|
|
total_bytes = cmd_bytes + op->data.nbytes;
|
|
|
|
/*
|
|
* As per the coreQSPI IP spec,the number of command and data bytes are
|
|
* controlled by the frames register for each SPI sequence. This supports
|
|
* the SPI flash memory read and writes sequences as below. so configure
|
|
* the cmd and total bytes accordingly.
|
|
* ---------------------------------------------------------------------
|
|
* TOTAL BYTES | CMD BYTES | What happens |
|
|
* ______________________________________________________________________
|
|
* | | |
|
|
* 1 | 1 | The SPI core will transmit a single byte |
|
|
* | | and receive data is discarded |
|
|
* | | |
|
|
* 1 | 0 | The SPI core will transmit a single byte |
|
|
* | | and return a single byte |
|
|
* | | |
|
|
* 10 | 4 | The SPI core will transmit 4 command |
|
|
* | | bytes discarding the receive data and |
|
|
* | | transmits 6 dummy bytes returning the 6 |
|
|
* | | received bytes and return a single byte |
|
|
* | | |
|
|
* 10 | 10 | The SPI core will transmit 10 command |
|
|
* | | |
|
|
* 10 | 0 | The SPI core will transmit 10 command |
|
|
* | | bytes and returning 10 received bytes |
|
|
* ______________________________________________________________________
|
|
*/
|
|
|
|
if (!(op->data.dir == SPI_MEM_DATA_IN))
|
|
cmd_bytes = total_bytes;
|
|
|
|
frames = total_bytes & BYTESUPPER_MASK;
|
|
writel(frames, qspi->regs + REG_FRAMESUP);
|
|
frames = total_bytes & BYTESLOWER_MASK;
|
|
frames |= cmd_bytes << FRAMES_CMDBYTES_SHIFT;
|
|
|
|
if (op->dummy.buswidth)
|
|
idle_cycles = op->dummy.nbytes * 8 / op->dummy.buswidth;
|
|
|
|
frames |= idle_cycles << FRAMES_IDLE_SHIFT;
|
|
ctrl = readl(qspi->regs + REG_CONTROL);
|
|
|
|
if (ctrl & CONTROL_MODE12_MASK)
|
|
frames |= (1 << FRAMES_SHIFT);
|
|
|
|
frames |= FRAMES_FLAGWORD;
|
|
writel(frames, qspi->regs + REG_FRAMES);
|
|
}
|
|
|
|
static int mchp_coreqspi_wait_for_ready(struct spi_slave *slave)
|
|
{
|
|
struct mchp_coreqspi *qspi = dev_get_priv(slave->dev->parent);
|
|
unsigned long count = 0;
|
|
|
|
while (1) {
|
|
if (readl(qspi->regs + REG_STATUS) & STATUS_READY)
|
|
return 0;
|
|
|
|
udelay(1);
|
|
count += 1;
|
|
if (count == TIMEOUT_MS)
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
static int mchp_coreqspi_set_operate_mode(struct mchp_coreqspi *qspi,
|
|
const struct spi_mem_op *op)
|
|
{
|
|
u32 control = readl(qspi->regs + REG_CONTROL);
|
|
|
|
/*
|
|
* The operating mode can be configured based on the command that needs
|
|
* to be send.
|
|
* bits[15:14]: Sets whether multiple bit SPI operates in normal,
|
|
* extended or full modes.
|
|
* 00: Normal (single DQ0 TX and single DQ1 RX lines)
|
|
* 01: Extended RO (command and address bytes on DQ0 only)
|
|
* 10: Extended RW (command byte on DQ0 only)
|
|
* 11: Full. (command and address are on all DQ lines)
|
|
* bit[13]: Sets whether multiple bit SPI uses 2 or 4 bits of data
|
|
* 0: 2-bits (BSPI)
|
|
* 1: 4-bits (QSPI)
|
|
*/
|
|
if (op->data.buswidth == 4 || op->data.buswidth == 2) {
|
|
control &= ~CONTROL_MODE12_MASK;
|
|
if (op->cmd.buswidth == 1 && (op->addr.buswidth == 1 ||
|
|
op->addr.buswidth == 0))
|
|
control |= CONTROL_MODE12_EX_RO;
|
|
else if (op->cmd.buswidth == 1)
|
|
control |= CONTROL_MODE12_EX_RW;
|
|
else
|
|
control |= CONTROL_MODE12_FULL;
|
|
|
|
control |= CONTROL_MODE0;
|
|
} else {
|
|
control &= ~(CONTROL_MODE12_MASK | CONTROL_MODE0);
|
|
}
|
|
|
|
writel(control, qspi->regs + REG_CONTROL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_coreqspi_exec_op(struct spi_slave *slave,
|
|
const struct spi_mem_op *op)
|
|
{
|
|
struct mchp_coreqspi *qspi = dev_get_priv(slave->dev->parent);
|
|
|
|
u32 address = op->addr.val;
|
|
u8 opcode = op->cmd.opcode;
|
|
u8 opaddr[5];
|
|
int err = 0, i;
|
|
|
|
err = mchp_coreqspi_wait_for_ready(slave);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mchp_coreqspi_set_operate_mode(qspi, op);
|
|
if (err)
|
|
return err;
|
|
|
|
mchp_coreqspi_config_op(qspi, op);
|
|
if (op->cmd.opcode) {
|
|
qspi->txbuf = &opcode;
|
|
qspi->rxbuf = NULL;
|
|
qspi->tx_len = op->cmd.nbytes;
|
|
qspi->rx_len = 0;
|
|
mchp_coreqspi_write_op(qspi, false);
|
|
}
|
|
|
|
qspi->txbuf = &opaddr[0];
|
|
if (op->addr.nbytes) {
|
|
for (i = 0; i < op->addr.nbytes; i++)
|
|
qspi->txbuf[i] = address >> (8 * (op->addr.nbytes - i - 1));
|
|
|
|
qspi->rxbuf = NULL;
|
|
qspi->tx_len = op->addr.nbytes;
|
|
qspi->rx_len = 0;
|
|
mchp_coreqspi_write_op(qspi, false);
|
|
}
|
|
|
|
if (op->data.nbytes) {
|
|
if (op->data.dir == SPI_MEM_DATA_OUT) {
|
|
qspi->txbuf = (u8 *)op->data.buf.out;
|
|
qspi->rxbuf = NULL;
|
|
qspi->rx_len = 0;
|
|
qspi->tx_len = op->data.nbytes;
|
|
mchp_coreqspi_write_op(qspi, true);
|
|
} else {
|
|
qspi->txbuf = NULL;
|
|
qspi->rxbuf = (u8 *)op->data.buf.in;
|
|
qspi->rx_len = op->data.nbytes;
|
|
qspi->tx_len = 0;
|
|
mchp_coreqspi_read_op(qspi);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool mchp_coreqspi_supports_op(struct spi_slave *slave,
|
|
const struct spi_mem_op *op)
|
|
{
|
|
if (!spi_mem_default_supports_op(slave, op))
|
|
return false;
|
|
|
|
if ((op->data.buswidth == 4 || op->data.buswidth == 2) &&
|
|
(op->cmd.buswidth == 1 && (op->addr.buswidth == 1 ||
|
|
op->addr.buswidth == 0))) {
|
|
/*
|
|
* If the command and address are on DQ0 only, then this
|
|
* controller doesn't support sending data on dual and
|
|
* quad lines. but it supports reading data on dual and
|
|
* quad lines with same configuration as command and
|
|
* address on DQ0.
|
|
* i.e. The control register[15:13] :EX_RO(read only) is
|
|
* meant only for the command and address are on DQ0 but
|
|
* not to write data, it is just to read.
|
|
* Ex: 0x34h is Quad Load Program Data which is not
|
|
* supported. Then the spi-mem layer will iterate over
|
|
* each command and it will chose the supported one.
|
|
*/
|
|
if (op->data.dir == SPI_MEM_DATA_OUT)
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static int mchp_coreqspi_adjust_op_size(struct spi_slave *slave,
|
|
struct spi_mem_op *op)
|
|
{
|
|
if (op->data.dir == SPI_MEM_DATA_OUT) {
|
|
if (op->data.nbytes > MAX_DATA_CMD_LEN)
|
|
op->data.nbytes = MAX_DATA_CMD_LEN;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_coreqspi_set_speed(struct udevice *dev, uint speed)
|
|
{
|
|
struct mchp_coreqspi *qspi = dev_get_priv(dev);
|
|
u32 control, baud_rate_val = 0;
|
|
|
|
if (speed > (qspi->freq / 2))
|
|
speed = qspi->freq / 2;
|
|
|
|
baud_rate_val = DIV_ROUND_UP(qspi->freq, 2 * speed);
|
|
if (baud_rate_val >= MAX_DIVIDER || baud_rate_val <= MIN_DIVIDER)
|
|
return -EINVAL;
|
|
|
|
control = readl(qspi->regs + REG_CONTROL);
|
|
control &= ~CONTROL_CLKRATE_MASK;
|
|
control |= baud_rate_val << CONTROL_CLKRATE_SHIFT;
|
|
writel(control, qspi->regs + REG_CONTROL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_coreqspi_set_mode(struct udevice *dev, uint mode)
|
|
{
|
|
struct mchp_coreqspi *qspi = dev_get_priv(dev);
|
|
u32 control;
|
|
|
|
control = readl(qspi->regs + REG_CONTROL);
|
|
|
|
if ((mode & SPI_CPOL) && (mode & SPI_CPHA))
|
|
control |= CONTROL_CLKIDLE;
|
|
else
|
|
control &= ~CONTROL_CLKIDLE;
|
|
|
|
writel(control, qspi->regs + REG_CONTROL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_coreqspi_claim_bus(struct udevice *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_coreqspi_release_bus(struct udevice *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_coreqspi_probe(struct udevice *dev)
|
|
{
|
|
struct mchp_coreqspi *qspi = dev_get_priv(dev);
|
|
struct clk clk;
|
|
ulong clk_rate;
|
|
int ret;
|
|
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
ret = clk_enable(&clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
clk_rate = clk_get_rate(&clk);
|
|
if (!clk_rate)
|
|
return -EINVAL;
|
|
qspi->freq = clk_rate;
|
|
|
|
qspi->regs = dev_read_addr_ptr(dev);
|
|
if (!qspi->regs)
|
|
return -EINVAL;
|
|
|
|
/* Init the mpfs qspi hw */
|
|
mchp_coreqspi_init_hw(qspi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_controller_mem_ops mchp_coreqspi_mem_ops = {
|
|
.adjust_op_size = mchp_coreqspi_adjust_op_size,
|
|
.supports_op = mchp_coreqspi_supports_op,
|
|
.exec_op = mchp_coreqspi_exec_op,
|
|
};
|
|
|
|
static const struct dm_spi_ops mchp_coreqspi_ops = {
|
|
.claim_bus = mchp_coreqspi_claim_bus,
|
|
.release_bus = mchp_coreqspi_release_bus,
|
|
.set_speed = mchp_coreqspi_set_speed,
|
|
.set_mode = mchp_coreqspi_set_mode,
|
|
.mem_ops = &mchp_coreqspi_mem_ops,
|
|
};
|
|
|
|
static const struct udevice_id mchp_coreqspi_ids[] = {
|
|
{ .compatible = "microchip,mpfs-coreqspi-rtl-v2" },
|
|
{ .compatible = "microchip,mpfs-qspi" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(mchp_coreqspi) = {
|
|
.name = "mchp_coreqspi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = mchp_coreqspi_ids,
|
|
.ops = &mchp_coreqspi_ops,
|
|
.priv_auto = sizeof(struct mchp_coreqspi),
|
|
.probe = mchp_coreqspi_probe,
|
|
};
|