Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-10 23:24:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/net/mv88e6xxx.c
Robert Marko 89943052e4 net: mv88e6xxx: add Clause 45 support 
Marvell LinkStreet switches support Clause 45 MDIO on the internal bus.

C45 read or writes require the register address to be written first to
the SMI PHY Data register, and then a special C45 Write Address Register
OP is used on the SMI PHY Register before making a C45 Read Data Register
OP and being able to actually read the register.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2023-11-05 16:11:37 -05:00

821 lines
22 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2022
* Gateworks Corporation <www.gateworks.com>
* Tim Harvey <tharvey@gateworks.com>
*
* (C) Copyright 2015
* Elecsys Corporation <www.elecsyscorp.com>
* Kevin Smith <kevin.smith@elecsyscorp.com>
*
* Original driver:
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Prafulla Wadaskar <prafulla@marvell.com>
*/
/*
* DSA driver for mv88e6xxx ethernet switches.
*
* This driver configures the mv88e6xxx for basic use as a DSA switch.
*
* This driver was adapted from drivers/net/phy/mv88e61xx and tested
* on the mv88e6176 via an SGMII interface.
*/
#include <common.h>
#include <dm/device.h>
#include <dm/device_compat.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
#include <dm/of_extra.h>
#include <linux/bitfield.h>
#include <linux/delay.h>
#include <miiphy.h>
#include <net/dsa.h>
/* Device addresses */
#define DEVADDR_PHY(p) (p)
#define DEVADDR_SERDES 0x0F
/* SMI indirection registers for multichip addressing mode */
#define SMI_CMD_REG 0x00
#define SMI_DATA_REG 0x01
/* Global registers */
#define GLOBAL1_STATUS 0x00
#define GLOBAL1_CTRL 0x04
/* Global 2 registers */
#define GLOBAL2_REG_PHY_CMD 0x18
#define GLOBAL2_REG_PHY_DATA 0x19
#define GLOBAL2_REG_SCRATCH 0x1A
/* Port registers */
#define PORT_REG_STATUS 0x00
#define PORT_REG_PHYS_CTRL 0x01
#define PORT_REG_SWITCH_ID 0x03
#define PORT_REG_CTRL 0x04
/* Phy registers */
#define PHY_REG_PAGE 0x16
/* Phy page numbers */
#define PHY_PAGE_COPPER 0
#define PHY_PAGE_SERDES 1
/* Register fields */
#define GLOBAL1_CTRL_SWRESET BIT(15)
#define PORT_REG_STATUS_SPEED_SHIFT 8
#define PORT_REG_STATUS_SPEED_10 0
#define PORT_REG_STATUS_SPEED_100 1
#define PORT_REG_STATUS_SPEED_1000 2
#define PORT_REG_STATUS_CMODE_MASK 0xF
#define PORT_REG_STATUS_CMODE_SGMII 0xa
#define PORT_REG_STATUS_CMODE_1000BASE_X 0x9
#define PORT_REG_STATUS_CMODE_100BASE_X 0x8
#define PORT_REG_STATUS_CMODE_RGMII 0x7
#define PORT_REG_STATUS_CMODE_RMII 0x5
#define PORT_REG_STATUS_CMODE_RMII_PHY 0x4
#define PORT_REG_STATUS_CMODE_GMII 0x3
#define PORT_REG_STATUS_CMODE_MII 0x2
#define PORT_REG_STATUS_CMODE_MIIPHY 0x1
#define PORT_REG_PHYS_CTRL_RGMII_DELAY_RXCLK BIT(15)
#define PORT_REG_PHYS_CTRL_RGMII_DELAY_TXCLK BIT(14)
#define PORT_REG_PHYS_CTRL_PCS_AN_EN BIT(10)
#define PORT_REG_PHYS_CTRL_PCS_AN_RST BIT(9)
#define PORT_REG_PHYS_CTRL_FC_VALUE BIT(7)
#define PORT_REG_PHYS_CTRL_FC_FORCE BIT(6)
#define PORT_REG_PHYS_CTRL_LINK_VALUE BIT(5)
#define PORT_REG_PHYS_CTRL_LINK_FORCE BIT(4)
#define PORT_REG_PHYS_CTRL_DUPLEX_VALUE BIT(3)
#define PORT_REG_PHYS_CTRL_DUPLEX_FORCE BIT(2)
#define PORT_REG_PHYS_CTRL_SPD1000 BIT(1)
#define PORT_REG_PHYS_CTRL_SPD100 BIT(0)
#define PORT_REG_PHYS_CTRL_SPD_MASK (BIT(1) | BIT(0))
#define PORT_REG_CTRL_PSTATE_SHIFT 0
#define PORT_REG_CTRL_PSTATE_MASK 3
/* Field values */
#define PORT_REG_CTRL_PSTATE_DISABLED 0
#define PORT_REG_CTRL_PSTATE_FORWARD 3
/*
* Macros for building commands for indirect addressing modes. These are valid
* for both the indirect multichip addressing mode and the PHY indirection
* required for the writes to any PHY register.
*/
#define SMI_BUSY BIT(15)
#define SMI_CMD_CLAUSE_22 BIT(12)
#define SMI_CMD_OP_MASK GENMASK(11, 10)
#define SMI_CMD_CLAUSE_22_OP_WRITE 0x1
#define SMI_CMD_CLAUSE_22_OP_READ 0x2
#define SMI_CMD_CLAUSE_45_OP_WRITE_ADDR 0x0
#define SMI_CMD_CLAUSE_45_OP_WRITE 0x1
#define SMI_CMD_CLAUSE_45_OP_READ 0x3
#define SMI_CMD_ADDR_MASK GENMASK(9, 5)
#define SMI_CMD_REG_MASK GENMASK(4, 0)
#define SMI_CMD_READ(addr, reg) \
(SMI_BUSY | SMI_CMD_CLAUSE_22 | FIELD_PREP(SMI_CMD_OP_MASK, SMI_CMD_CLAUSE_22_OP_READ)) | \
(FIELD_PREP(SMI_CMD_ADDR_MASK, addr)) | \
(FIELD_PREP(SMI_CMD_REG_MASK, reg))
#define SMI_CMD_WRITE(addr, reg) \
(SMI_BUSY | SMI_CMD_CLAUSE_22 | FIELD_PREP(SMI_CMD_OP_MASK, SMI_CMD_CLAUSE_22_OP_WRITE)) | \
(FIELD_PREP(SMI_CMD_ADDR_MASK, addr)) | \
(FIELD_PREP(SMI_CMD_REG_MASK, reg))
#define SMI_CMD_SET_C45_ADDR(phyad, devad) \
(SMI_BUSY | FIELD_PREP(SMI_CMD_OP_MASK, SMI_CMD_CLAUSE_45_OP_WRITE_ADDR)) | \
(FIELD_PREP(SMI_CMD_ADDR_MASK, phyad)) | \
(FIELD_PREP(SMI_CMD_REG_MASK, devad))
#define SMI_CMD_READ_C45(phyad, devad) \
(SMI_BUSY | FIELD_PREP(SMI_CMD_OP_MASK, SMI_CMD_CLAUSE_45_OP_READ)) | \
(FIELD_PREP(SMI_CMD_ADDR_MASK, phyad)) | \
(FIELD_PREP(SMI_CMD_REG_MASK, devad))
#define SMI_CMD_WRITE_C45(phyad, devad) \
(SMI_BUSY | FIELD_PREP(SMI_CMD_OP_MASK, SMI_CMD_CLAUSE_45_OP_WRITE)) | \
(FIELD_PREP(SMI_CMD_ADDR_MASK, phyad)) | \
(FIELD_PREP(SMI_CMD_REG_MASK, devad))
/* ID register values for different switch models */
#define PORT_SWITCH_ID_6020 0x0200
#define PORT_SWITCH_ID_6070 0x0700
#define PORT_SWITCH_ID_6071 0x0710
#define PORT_SWITCH_ID_6096 0x0980
#define PORT_SWITCH_ID_6097 0x0990
#define PORT_SWITCH_ID_6172 0x1720
#define PORT_SWITCH_ID_6176 0x1760
#define PORT_SWITCH_ID_6220 0x2200
#define PORT_SWITCH_ID_6240 0x2400
#define PORT_SWITCH_ID_6250 0x2500
#define PORT_SWITCH_ID_6320 0x1150
#define PORT_SWITCH_ID_6352 0x3520
struct mv88e6xxx_priv {
int smi_addr;
int id;
int port_count; /* Number of switch ports */
int port_reg_base; /* Base of the switch port registers */
u8 global1; /* Offset of Switch Global 1 registers */
u8 global2; /* Offset of Switch Global 2 registers */
};
/* Wait for the current SMI indirect command to complete */
static int mv88e6xxx_smi_wait(struct udevice *dev, int smi_addr)
{
int val;
u32 timeout = 100;
do {
val = dm_mdio_read(dev->parent, smi_addr, MDIO_DEVAD_NONE, SMI_CMD_REG);
if (val >= 0 && (val & SMI_BUSY) == 0)
return 0;
mdelay(1);
} while (--timeout);
dev_err(dev, "SMI busy timeout\n");
return -ETIMEDOUT;
}
/*
* The mv88e6xxx has three types of addresses: the smi bus address, the device
* address, and the register address. The smi bus address distinguishes it on
* the smi bus from other PHYs or switches. The device address determines
* which on-chip register set you are reading/writing (the various PHYs, their
* associated ports, or global configuration registers). The register address
* is the offset of the register you are reading/writing.
*
* When the mv88e6xxx is hardware configured to have address zero, it behaves in
* single-chip addressing mode, where it responds to all SMI addresses, using
* the smi address as its device address. This obviously only works when this
* is the only chip on the SMI bus. This allows the driver to access device
* registers without using indirection. When the chip is configured to a
* non-zero address, it only responds to that SMI address and requires indirect
* writes to access the different device addresses.
*/
static int mv88e6xxx_reg_read(struct udevice *dev, int addr, int reg)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
int smi_addr = priv->smi_addr;
int res;
/* In single-chip mode, the device can be addressed directly */
if (smi_addr == 0)
return dm_mdio_read(dev->parent, addr, MDIO_DEVAD_NONE, reg);
/* Wait for the bus to become free */
res = mv88e6xxx_smi_wait(dev, smi_addr);
if (res < 0)
return res;
/* Issue the read command */
res = dm_mdio_write(dev->parent, smi_addr, MDIO_DEVAD_NONE, SMI_CMD_REG,
SMI_CMD_READ(addr, reg));
if (res < 0)
return res;
/* Wait for the read command to complete */
res = mv88e6xxx_smi_wait(dev, smi_addr);
if (res < 0)
return res;
/* Read the data */
res = dm_mdio_read(dev->parent, smi_addr, MDIO_DEVAD_NONE, SMI_DATA_REG);
if (res < 0)
return res;
return res & 0xffff;
}
/* See the comment above mv88e6xxx_reg_read */
static int mv88e6xxx_reg_write(struct udevice *dev, int addr, int reg, u16 val)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
int smi_addr = priv->smi_addr;
int res;
/* In single-chip mode, the device can be addressed directly */
if (smi_addr == 0)
return dm_mdio_write(dev->parent, addr, MDIO_DEVAD_NONE, reg, val);
/* Wait for the bus to become free */
res = mv88e6xxx_smi_wait(dev, smi_addr);
if (res < 0)
return res;
/* Set the data to write */
res = dm_mdio_write(dev->parent, smi_addr, MDIO_DEVAD_NONE,
SMI_DATA_REG, val);
if (res < 0)
return res;
/* Issue the write command */
res = dm_mdio_write(dev->parent, smi_addr, MDIO_DEVAD_NONE, SMI_CMD_REG,
SMI_CMD_WRITE(addr, reg));
if (res < 0)
return res;
/* Wait for the write command to complete */
res = mv88e6xxx_smi_wait(dev, smi_addr);
if (res < 0)
return res;
return 0;
}
static int mv88e6xxx_phy_wait(struct udevice *dev)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
int val;
u32 timeout = 100;
do {
val = mv88e6xxx_reg_read(dev, priv->global2, GLOBAL2_REG_PHY_CMD);
if (val >= 0 && (val & SMI_BUSY) == 0)
return 0;
mdelay(1);
} while (--timeout);
return -ETIMEDOUT;
}
static int mv88e6xxx_phy_read_indirect(struct udevice *dev, int phyad, int devad, int reg)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
u16 smi_cmd;
int res;
if (devad >= 0) {
/*
* For C45 we need to write the register address into the
* PHY Data register first and then call the Write Address
* Register OP in the PHY command register.
*/
res = mv88e6xxx_reg_write(dev, priv->global2,
GLOBAL2_REG_PHY_DATA,
reg);
res = mv88e6xxx_reg_write(dev, priv->global2,
GLOBAL2_REG_PHY_CMD,
SMI_CMD_SET_C45_ADDR(phyad, devad));
/* Wait for busy bit to clear */
res = mv88e6xxx_phy_wait(dev);
if (res < 0)
return res;
/* Set the actual C45 or C22 OP-s */
smi_cmd = SMI_CMD_READ_C45(phyad, devad);
} else
smi_cmd = SMI_CMD_READ(phyad, reg);
/* Issue command to read */
res = mv88e6xxx_reg_write(dev, priv->global2,
GLOBAL2_REG_PHY_CMD,
smi_cmd);
/* Wait for data to be read */
res = mv88e6xxx_phy_wait(dev);
if (res < 0)
return res;
/* Read retrieved data */
return mv88e6xxx_reg_read(dev, priv->global2,
GLOBAL2_REG_PHY_DATA);
}
static int mv88e6xxx_phy_write_indirect(struct udevice *dev, int phyad,
int devad, int reg, u16 data)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
u16 smi_cmd;
int res;
if (devad >= 0) {
/*
* For C45 we need to write the register address into the
* PHY Data register first and then call the Write Address
* Register OP in the PHY command register.
*/
res = mv88e6xxx_reg_write(dev, priv->global2,
GLOBAL2_REG_PHY_DATA,
reg);
res = mv88e6xxx_reg_write(dev, priv->global2,
GLOBAL2_REG_PHY_CMD,
SMI_CMD_SET_C45_ADDR(phyad, devad));
/* Wait for busy bit to clear */
res = mv88e6xxx_phy_wait(dev);
if (res < 0)
return res;
/* Set the actual C45 or C22 OP-s */
smi_cmd = SMI_CMD_WRITE_C45(phyad, devad);
} else
smi_cmd = SMI_CMD_WRITE(phyad, reg);
/* Set the data to write */
res = mv88e6xxx_reg_write(dev, priv->global2,
GLOBAL2_REG_PHY_DATA, data);
if (res < 0)
return res;
/* Issue the write command */
res = mv88e6xxx_reg_write(dev, priv->global2,
GLOBAL2_REG_PHY_CMD,
smi_cmd);
if (res < 0)
return res;
/* Wait for command to complete */
return mv88e6xxx_phy_wait(dev);
}
/* Wrapper function to make calls to phy_read_indirect simpler */
static int mv88e6xxx_phy_read(struct udevice *dev, int phy, int reg)
{
return mv88e6xxx_phy_read_indirect(dev, DEVADDR_PHY(phy),
MDIO_DEVAD_NONE, reg);
}
/* Wrapper function to make calls to phy_write_indirect simpler */
static int mv88e6xxx_phy_write(struct udevice *dev, int phy, int reg, u16 val)
{
return mv88e6xxx_phy_write_indirect(dev, DEVADDR_PHY(phy),
MDIO_DEVAD_NONE, reg, val);
}
static int mv88e6xxx_port_read(struct udevice *dev, u8 port, u8 reg)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
return mv88e6xxx_reg_read(dev, priv->port_reg_base + port, reg);
}
static int mv88e6xxx_port_write(struct udevice *dev, u8 port, u8 reg, u16 val)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
return mv88e6xxx_reg_write(dev, priv->port_reg_base + port, reg, val);
}
static int mv88e6xxx_set_page(struct udevice *dev, u8 phy, u8 page)
{
return mv88e6xxx_phy_write(dev, phy, PHY_REG_PAGE, page);
}
static int mv88e6xxx_get_switch_id(struct udevice *dev)
{
int res;
res = mv88e6xxx_port_read(dev, 0, PORT_REG_SWITCH_ID);
if (res < 0) {
dev_err(dev, "Failed to read switch ID: %d\n", res);
return res;
}
return res & 0xfff0;
}
static bool mv88e6xxx_6352_family(struct udevice *dev)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
switch (priv->id) {
case PORT_SWITCH_ID_6172:
case PORT_SWITCH_ID_6176:
case PORT_SWITCH_ID_6240:
case PORT_SWITCH_ID_6352:
return true;
}
return false;
}
static int mv88e6xxx_get_cmode(struct udevice *dev, u8 port)
{
int res;
res = mv88e6xxx_port_read(dev, port, PORT_REG_STATUS);
if (res < 0)
return res;
return res & PORT_REG_STATUS_CMODE_MASK;
}
static int mv88e6xxx_switch_reset(struct udevice *dev)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
int time_ms;
int val;
u8 port;
/* Disable all ports */
for (port = 0; port < priv->port_count; port++) {
val = mv88e6xxx_port_read(dev, port, PORT_REG_CTRL);
if (val < 0)
return val;
val &= ~(PORT_REG_CTRL_PSTATE_MASK << PORT_REG_CTRL_PSTATE_SHIFT);
val |= (PORT_REG_CTRL_PSTATE_DISABLED << PORT_REG_CTRL_PSTATE_SHIFT);
val = mv88e6xxx_port_write(dev, port, PORT_REG_CTRL, val);
if (val < 0)
return val;
}
/* Wait 2 ms for queues to drain */
udelay(2000);
/* Reset switch */
val = mv88e6xxx_reg_read(dev, priv->global1, GLOBAL1_CTRL);
if (val < 0)
return val;
val |= GLOBAL1_CTRL_SWRESET;
val = mv88e6xxx_reg_write(dev, priv->global1, GLOBAL1_CTRL, val);
if (val < 0)
return val;
/* Wait up to 1 second for switch to reset complete */
for (time_ms = 1000; time_ms; time_ms--) {
val = mv88e6xxx_reg_read(dev, priv->global1, GLOBAL1_CTRL);
if (val >= 0 && ((val & GLOBAL1_CTRL_SWRESET) == 0))
break;
udelay(1000);
}
if (!time_ms)
return -ETIMEDOUT;
return 0;
}
static int mv88e6xxx_serdes_init(struct udevice *dev)
{
int val;
val = mv88e6xxx_set_page(dev, DEVADDR_SERDES, PHY_PAGE_SERDES);
if (val < 0)
return val;
/* Power up serdes module */
val = mv88e6xxx_phy_read(dev, DEVADDR_SERDES, MII_BMCR);
if (val < 0)
return val;
val &= ~(BMCR_PDOWN);
val = mv88e6xxx_phy_write(dev, DEVADDR_SERDES, MII_BMCR, val);
if (val < 0)
return val;
return 0;
}
/*
* This function is used to pre-configure the required register
* offsets, so that the indirect register access to the PHY registers
* is possible. This is necessary to be able to read the PHY ID
* while driver probing or in get_phy_id(). The globalN register
* offsets must be initialized correctly for a detected switch,
* otherwise detection of the PHY ID won't work!
*/
static int mv88e6xxx_priv_reg_offs_pre_init(struct udevice *dev)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
/*
* Initial 'port_reg_base' value must be an offset of existing
* port register, then reading the ID should succeed. First, try
* to read via port registers with device address 0x10 (88E6096
* and compatible switches).
*/
priv->port_reg_base = 0x10;
priv->id = mv88e6xxx_get_switch_id(dev);
if (priv->id != 0xfff0) {
priv->global1 = 0x1B;
priv->global2 = 0x1C;
return 0;
}
/*
* Now try via port registers with device address 0x08
* (88E6020 and compatible switches).
*/
priv->port_reg_base = 0x08;
priv->id = mv88e6xxx_get_switch_id(dev);
if (priv->id != 0xfff0) {
priv->global1 = 0x0F;
priv->global2 = 0x07;
return 0;
}
dev_warn(dev, "%s Unknown ID 0x%x\n", __func__, priv->id);
return -ENODEV;
}
static int mv88e6xxx_mdio_read(struct udevice *dev, int addr, int devad, int reg)
{
return mv88e6xxx_phy_read_indirect(dev->parent, DEVADDR_PHY(addr),
MDIO_DEVAD_NONE, reg);
}
static int mv88e6xxx_mdio_write(struct udevice *dev, int addr, int devad,
int reg, u16 val)
{
return mv88e6xxx_phy_write_indirect(dev->parent, DEVADDR_PHY(addr),
MDIO_DEVAD_NONE, reg, val);
}
static const struct mdio_ops mv88e6xxx_mdio_ops = {
.read = mv88e6xxx_mdio_read,
.write = mv88e6xxx_mdio_write,
};
static int mv88e6xxx_mdio_bind(struct udevice *dev)
{
char name[32];
static int num_devices;
sprintf(name, "mv88e6xxx-mdio-%d", num_devices++);
device_set_name(dev, name);
return 0;
}
U_BOOT_DRIVER(mv88e6xxx_mdio) = {
.name = "mv88e6xxx_mdio",
.id = UCLASS_MDIO,
.ops = &mv88e6xxx_mdio_ops,
.bind = mv88e6xxx_mdio_bind,
.plat_auto = sizeof(struct mdio_perdev_priv),
};
static int mv88e6xxx_port_probe(struct udevice *dev, int port, struct phy_device *phy)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
int supported;
switch (priv->id) {
case PORT_SWITCH_ID_6020:
case PORT_SWITCH_ID_6070:
case PORT_SWITCH_ID_6071:
supported = PHY_BASIC_FEATURES | SUPPORTED_MII;
break;
default:
supported = PHY_GBIT_FEATURES;
break;
}
phy->supported &= supported;
phy->advertising &= supported;
return phy_config(phy);
}
static int mv88e6xxx_port_enable(struct udevice *dev, int port, struct phy_device *phy)
{
int val, ret;
dev_dbg(dev, "%s P%d phy:0x%08x %s\n", __func__, port,
phy->phy_id, phy_string_for_interface(phy->interface));
if (phy->phy_id == PHY_FIXED_ID) {
/* Physical Control register: Table 62 */
val = mv88e6xxx_port_read(dev, port, PORT_REG_PHYS_CTRL);
/* configure RGMII delays for fixed link */
switch (phy->interface) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
dev_dbg(dev, "configure internal RGMII delays\n");
/* RGMII delays */
val &= ~(PORT_REG_PHYS_CTRL_RGMII_DELAY_RXCLK ||
PORT_REG_PHYS_CTRL_RGMII_DELAY_TXCLK);
if (phy->interface == PHY_INTERFACE_MODE_RGMII_ID ||
phy->interface == PHY_INTERFACE_MODE_RGMII_RXID)
val |= PORT_REG_PHYS_CTRL_RGMII_DELAY_RXCLK;
if (phy->interface == PHY_INTERFACE_MODE_RGMII_ID ||
phy->interface == PHY_INTERFACE_MODE_RGMII_TXID)
val |= PORT_REG_PHYS_CTRL_RGMII_DELAY_TXCLK;
break;
default:
break;
}
/* Force Link */
val |= PORT_REG_PHYS_CTRL_LINK_VALUE |
PORT_REG_PHYS_CTRL_LINK_FORCE;
ret = mv88e6xxx_port_write(dev, port, PORT_REG_PHYS_CTRL, val);
if (ret < 0)
return ret;
if (mv88e6xxx_6352_family(dev)) {
/* validate interface type */
dev_dbg(dev, "validate interface type\n");
val = mv88e6xxx_get_cmode(dev, port);
if (val < 0)
return val;
switch (phy->interface) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_ID:
if (val != PORT_REG_STATUS_CMODE_RGMII)
goto mismatch;
break;
case PHY_INTERFACE_MODE_1000BASEX:
if (val != PORT_REG_STATUS_CMODE_1000BASE_X)
goto mismatch;
break;
mismatch:
default:
dev_err(dev, "Mismatched PHY mode %s on port %d!\n",
phy_string_for_interface(phy->interface), port);
break;
}
}
}
/* enable port */
val = mv88e6xxx_port_read(dev, port, PORT_REG_CTRL);
if (val < 0)
return val;
val &= ~(PORT_REG_CTRL_PSTATE_MASK << PORT_REG_CTRL_PSTATE_SHIFT);
val |= (PORT_REG_CTRL_PSTATE_FORWARD << PORT_REG_CTRL_PSTATE_SHIFT);
val = mv88e6xxx_port_write(dev, port, PORT_REG_CTRL, val);
if (val < 0)
return val;
return phy_startup(phy);
}
static void mv88e6xxx_port_disable(struct udevice *dev, int port, struct phy_device *phy)
{
int val;
dev_dbg(dev, "%s P%d phy:0x%08x %s\n", __func__, port,
phy->phy_id, phy_string_for_interface(phy->interface));
val = mv88e6xxx_port_read(dev, port, PORT_REG_CTRL);
val &= ~(PORT_REG_CTRL_PSTATE_MASK << PORT_REG_CTRL_PSTATE_SHIFT);
val |= (PORT_REG_CTRL_PSTATE_DISABLED << PORT_REG_CTRL_PSTATE_SHIFT);
mv88e6xxx_port_write(dev, port, PORT_REG_CTRL, val);
}
static const struct dsa_ops mv88e6xxx_dsa_ops = {
.port_probe = mv88e6xxx_port_probe,
.port_enable = mv88e6xxx_port_enable,
.port_disable = mv88e6xxx_port_disable,
};
/* bind and probe the switch mdios */
static int mv88e6xxx_probe_mdio(struct udevice *dev)
{
struct udevice *mdev;
const char *name;
ofnode node;
int ret;
/* bind phy ports of mdio child node to mv88e6xxx_mdio device */
node = dev_read_subnode(dev, "mdio");
if (!ofnode_valid(node))
return 0;
name = ofnode_get_name(node);
ret = device_bind_driver_to_node(dev,
"mv88e6xxx_mdio",
name, node, NULL);
if (ret) {
dev_err(dev, "failed to bind %s: %d\n", name, ret);
} else {
/* need to probe it as there is no compatible to do so */
ret = uclass_get_device_by_ofnode(UCLASS_MDIO, node, &mdev);
if (ret)
dev_err(dev, "failed to probe %s: %d\n", name, ret);
}
return ret;
}
static int mv88e6xxx_probe(struct udevice *dev)
{
struct dsa_pdata *dsa_pdata = dev_get_uclass_plat(dev);
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
int val, ret;
if (ofnode_valid(dev_ofnode(dev)) &&
!ofnode_is_enabled(dev_ofnode(dev))) {
dev_dbg(dev, "switch disabled\n");
return -ENODEV;
}
/* probe internal mdio bus */
ret = mv88e6xxx_probe_mdio(dev);
if (ret)
return ret;
ret = mv88e6xxx_priv_reg_offs_pre_init(dev);
if (ret)
return ret;
dev_dbg(dev, "ID=0x%x PORT_BASE=0x%02x GLOBAL1=0x%02x GLOBAL2=0x%02x\n",
priv->id, priv->port_reg_base, priv->global1, priv->global2);
switch (priv->id) {
case PORT_SWITCH_ID_6096:
case PORT_SWITCH_ID_6097:
case PORT_SWITCH_ID_6172:
case PORT_SWITCH_ID_6176:
case PORT_SWITCH_ID_6240:
case PORT_SWITCH_ID_6352:
priv->port_count = 11;
break;
case PORT_SWITCH_ID_6020:
case PORT_SWITCH_ID_6070:
case PORT_SWITCH_ID_6071:
case PORT_SWITCH_ID_6220:
case PORT_SWITCH_ID_6250:
case PORT_SWITCH_ID_6320:
priv->port_count = 7;
break;
default:
return -ENODEV;
}
ret = mv88e6xxx_switch_reset(dev);
if (ret < 0)
return ret;
if (mv88e6xxx_6352_family(dev)) {
val = mv88e6xxx_get_cmode(dev, dsa_pdata->cpu_port);
if (val < 0)
return val;
/* initialize serdes */
if (val == PORT_REG_STATUS_CMODE_100BASE_X ||
val == PORT_REG_STATUS_CMODE_1000BASE_X ||
val == PORT_REG_STATUS_CMODE_SGMII) {
ret = mv88e6xxx_serdes_init(dev);
if (ret < 0)
return ret;
}
}
return 0;
}
static const struct udevice_id mv88e6xxx_ids[] = {
{ .compatible = "marvell,mv88e6085" },
{ }
};
U_BOOT_DRIVER(mv88e6xxx) = {
.name = "mv88e6xxx",
.id = UCLASS_DSA,
.of_match = mv88e6xxx_ids,
.probe = mv88e6xxx_probe,
.ops = &mv88e6xxx_dsa_ops,
.priv_auto = sizeof(struct mv88e6xxx_priv),
};
Reference in a new issue View git blame Copy permalink