u-boot/cpu/blackfin/Makefile
Mike Frysinger be853bf86b Blackfin: overhaul i2c driver
The current Blackfin i2c driver does not work properly with certain devices
due to it breaking up transfers incorrectly.  This is a rewrite of the
driver and relocates it to the newer place in the source tree.

Also remove duplicated I2C speed defines in Blackfin board configs and
disable I2C slave address usage since it isn't implemented.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28 13:26:13 -05:00

65 lines
1.9 KiB
Makefile

#
# U-boot - Makefile
#
# Copyright (c) 2005-2008 Analog Device Inc.
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# Licensed under the GPL-2 or later.
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(CPU).a
EXTRA :=
CEXTRA := initcode.o
SEXTRA := start.o
SOBJS := interrupt.o cache.o
COBJS := cpu.o traps.o interrupts.o reset.o serial.o watchdog.o
ifeq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS)
COBJS += initcode.o
endif
SRCS := $(SEXTRA:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
EXTRA := $(addprefix $(obj),$(EXTRA))
CEXTRA := $(addprefix $(obj),$(CEXTRA))
SEXTRA := $(addprefix $(obj),$(SEXTRA))
all: $(obj).depend $(LIB) $(obj).depend $(EXTRA) $(CEXTRA) $(SEXTRA) check_initcode
$(LIB): $(OBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)
$(OBJS): $(obj)bootrom-asm-offsets.h
$(obj)bootrom-asm-offsets.c: bootrom-asm-offsets.c.in bootrom-asm-offsets.awk
echo '#include <asm/mach-common/bits/bootrom.h>' | $(CPP) $(CPPFLAGS) - | gawk -f ./bootrom-asm-offsets.awk > $@.tmp
mv $@.tmp $@
$(obj)bootrom-asm-offsets.s: $(obj)bootrom-asm-offsets.c
$(CC) $(CFLAGS) -S $^ -o $@.tmp
mv $@.tmp $@
$(obj)bootrom-asm-offsets.h: $(obj)bootrom-asm-offsets.s
sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}" $^ > $@
# make sure our initcode (which goes into LDR) does not
# have relocs or external references
READINIT = env LC_ALL=C $(CROSS_COMPILE)readelf -s $<
check_initcode: $(obj)initcode.o
ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS)
@if $(READINIT) | grep '\<GLOBAL\>.*\<UND\>' ; then \
echo "$< contains external references!" 1>&2 ; \
exit 1 ; \
fi
endif
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################