u-boot/board/genesi/mx51_efikamx/imximage_sb.cfg
Anatolij Gustschin b1e6c4c3d4 Fix references to the documentation files
Many boot image configuration files refer to the
appropriate documentation file, but these references
contain typos in the directory and file name. Fix
them. Also fix reference to doc/README.SPL file.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-05-10 08:16:33 -04:00

122 lines
3.4 KiB
INI

/*
* Copyright (C) 2009 Pegatron Corporation
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
* Copyright (C) 2009-2012 Genesi USA, Inc.
*
* BASED ON: imx51evk
*
* (C) Copyright 2009
* Stefano Babic DENX Software Engineering sbabic@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not write to the Free Software
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
* Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
/*
* Boot Device : one of
* spi, sd (the board has no nand neither onenand)
*/
BOOT_FROM spi
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
/* DDR bus IOMUX PAD settings */
DATA 4 0x73fa88a0 0x200 # GRP_INMODE1
DATA 4 0x73fa850c 0x20c5 # SDODT1
DATA 4 0x73fa8510 0x20c5 # SDODT0
DATA 4 0x73fa8848 0x4 # DDR_A1
DATA 4 0x73fa84b8 0xe7 # DRAM_SDCLK
DATA 4 0x73fa84bc 0x45 # DRAM_SDQS0
DATA 4 0x73fa84c0 0x45 # DRAM_SDQS1
DATA 4 0x73fa84c4 0x45 # DRAM_SDQS2
DATA 4 0x73fa84c8 0x45 # DRAM_SDQS3
DATA 4 0x73fa8820 0x0 # DDRPKS
DATA 4 0x73fa84ac 0xe5 # SDWE
DATA 4 0x73fa84b0 0xe5 # SDCKE0
DATA 4 0x73fa84b4 0xe5 # SDCKE1
DATA 4 0x73fa84cc 0xe5 # DRAM_CS0
DATA 4 0x73fa84d0 0xe4 # DRAM_CS1
/*
* Setting DDR for micron
* 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
* CAS=3 BL=4
*/
/* ESDCTL_ESDCTL0 */
DATA 4 0x83fd9000 0x82a20000
/* ESDCTL_ESDCTL1 */
DATA 4 0x83fd9008 0x82a20000
/* ESDCTL_ESDMISC */
DATA 4 0x83fd9010 0xcaaaf6d0
/* ESDCTL_ESDCFG0 */
DATA 4 0x83fd9004 0x333574aa
/* ESDCTL_ESDCFG1 */
DATA 4 0x83fd900c 0x333574aa
/* Init DRAM on CS0 */
/* ESDCTL_ESDSCR */
DATA 4 0x83fd9014 0x04008008
DATA 4 0x83fd9014 0x0000801a
DATA 4 0x83fd9014 0x0000801b
DATA 4 0x83fd9014 0x00448019
DATA 4 0x83fd9014 0x07328018
DATA 4 0x83fd9014 0x04008008
DATA 4 0x83fd9014 0x00008010
DATA 4 0x83fd9014 0x00008010
DATA 4 0x83fd9014 0x06328018
DATA 4 0x83fd9014 0x03808019
DATA 4 0x83fd9014 0x00408019
DATA 4 0x83fd9014 0x00008000
/* Init DRAM on CS1 */
DATA 4 0x83fd9014 0x0400800c
DATA 4 0x83fd9014 0x0000801e
DATA 4 0x83fd9014 0x0000801f
DATA 4 0x83fd9014 0x0000801d
DATA 4 0x83fd9014 0x0732801c
DATA 4 0x83fd9014 0x0400800c
DATA 4 0x83fd9014 0x00008014
DATA 4 0x83fd9014 0x00008014
DATA 4 0x83fd9014 0x0632801c
DATA 4 0x83fd9014 0x0380801d
DATA 4 0x83fd9014 0x0042801d
DATA 4 0x83fd9014 0x00008004
/* Write to CTL0 */
DATA 4 0x83fd9000 0xb2a20000
/* Write to CTL1 */
DATA 4 0x83fd9008 0xb2a20000
/* ESDMISC */
DATA 4 0x83fd9010 0xcaaaf6d0
/* ESDCTL_ESDCDLYGD */
DATA 4 0x83fd9034 0x90000000
DATA 4 0x83fd9014 0x00000000