mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 23:47:24 +00:00
cd82f19985
A U-Boot image could be loaded and executed at a different location than it was linked at. For example, Aspeed takes a stable release version of U-Boot image as the golden one for recovery purposes. When the primary storage such as flash is corrupted, the golden image would be loaded to any SRAM/DRAM address on demands through ethernet/UART/etc and run for rescue. To deal with this condition, the PIE is needed as there is only one signed, golden image, which could be however executed at different places. This patch adds the PIE support for ARMv7 platform. Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
146 lines
3.7 KiB
ArmAsm
146 lines
3.7 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* relocate - common relocation function for ARM U-Boot
|
|
*
|
|
* Copyright (c) 2013 Albert ARIBAUD <albert.u.boot@aribaud.net>
|
|
*/
|
|
|
|
#include <asm-offsets.h>
|
|
#include <asm/assembler.h>
|
|
#include <config.h>
|
|
#include <elf.h>
|
|
#include <linux/linkage.h>
|
|
#ifdef CONFIG_CPU_V7M
|
|
#include <asm/armv7m.h>
|
|
#endif
|
|
|
|
/*
|
|
* Default/weak exception vectors relocation routine
|
|
*
|
|
* This routine covers the standard ARM cases: normal (0x00000000),
|
|
* high (0xffff0000) and VBAR. SoCs which do not comply with any of
|
|
* the standard cases must provide their own, strong, version.
|
|
*/
|
|
|
|
.section .text.relocate_vectors,"ax",%progbits
|
|
.weak relocate_vectors
|
|
|
|
ENTRY(relocate_vectors)
|
|
|
|
#ifdef CONFIG_CPU_V7M
|
|
/*
|
|
* On ARMv7-M we only have to write the new vector address
|
|
* to VTOR register.
|
|
*/
|
|
ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
|
|
ldr r1, =V7M_SCB_BASE
|
|
str r0, [r1, V7M_SCB_VTOR]
|
|
#else
|
|
#ifdef CONFIG_HAS_VBAR
|
|
/*
|
|
* If the ARM processor has the security extensions,
|
|
* use VBAR to relocate the exception vectors.
|
|
*/
|
|
ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
|
|
mcr p15, 0, r0, c12, c0, 0 /* Set VBAR */
|
|
#else
|
|
/*
|
|
* Copy the relocated exception vectors to the
|
|
* correct address
|
|
* CP15 c1 V bit gives us the location of the vectors:
|
|
* 0x00000000 or 0xFFFF0000.
|
|
*/
|
|
ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
|
|
mrc p15, 0, r2, c1, c0, 0 /* V bit (bit[13]) in CP15 c1 */
|
|
ands r2, r2, #(1 << 13)
|
|
ldreq r1, =0x00000000 /* If V=0 */
|
|
ldrne r1, =0xFFFF0000 /* If V=1 */
|
|
ldmia r0!, {r2-r8,r10}
|
|
stmia r1!, {r2-r8,r10}
|
|
ldmia r0!, {r2-r8,r10}
|
|
stmia r1!, {r2-r8,r10}
|
|
#endif
|
|
#endif
|
|
bx lr
|
|
|
|
ENDPROC(relocate_vectors)
|
|
|
|
/*
|
|
* void relocate_code(addr_moni)
|
|
*
|
|
* This function relocates the monitor code.
|
|
*
|
|
* NOTE:
|
|
* To prevent the code below from containing references with an R_ARM_ABS32
|
|
* relocation record type, we never refer to linker-defined symbols directly.
|
|
* Instead, we declare literals which contain their relative location with
|
|
* respect to relocate_code, and at run time, add relocate_code back to them.
|
|
*/
|
|
|
|
ENTRY(relocate_code)
|
|
adr r3, relocate_code
|
|
ldr r1, _image_copy_start_ofs
|
|
add r1, r3 /* r1 <- Run &__image_copy_start */
|
|
subs r4, r0, r1 /* r4 <- Run to copy offset */
|
|
beq relocate_done /* skip relocation */
|
|
ldr r1, _image_copy_start_ofs
|
|
add r1, r3 /* r1 <- Run &__image_copy_start */
|
|
ldr r2, _image_copy_end_ofs
|
|
add r2, r3 /* r2 <- Run &__image_copy_end */
|
|
copy_loop:
|
|
ldmia r1!, {r10-r11} /* copy from source address [r1] */
|
|
stmia r0!, {r10-r11} /* copy to target address [r0] */
|
|
cmp r1, r2 /* until source end address [r2] */
|
|
blo copy_loop
|
|
|
|
/*
|
|
* fix .rel.dyn relocations
|
|
*/
|
|
ldr r1, _rel_dyn_start_ofs
|
|
add r2, r1, r3 /* r2 <- Run &__rel_dyn_start */
|
|
ldr r1, _rel_dyn_end_ofs
|
|
add r3, r1, r3 /* r3 <- Run &__rel_dyn_end */
|
|
fixloop:
|
|
ldmia r2!, {r0-r1} /* (r0,r1) <- (SRC location,fixup) */
|
|
and r1, r1, #0xff
|
|
cmp r1, #R_ARM_RELATIVE
|
|
bne fixnext
|
|
|
|
/* relative fix: increase location by offset */
|
|
add r0, r0, r4
|
|
ldr r1, [r0]
|
|
add r1, r1, r4
|
|
str r1, [r0]
|
|
fixnext:
|
|
cmp r2, r3
|
|
blo fixloop
|
|
|
|
relocate_done:
|
|
|
|
#ifdef __XSCALE__
|
|
/*
|
|
* On xscale, icache must be invalidated and write buffers drained,
|
|
* even with cache disabled - 4.2.7 of xscale core developer's manual
|
|
*/
|
|
mcr p15, 0, r0, c7, c7, 0 /* invalidate icache */
|
|
mcr p15, 0, r0, c7, c10, 4 /* drain write buffer */
|
|
#endif
|
|
|
|
/* ARMv4- don't know bx lr but the assembler fails to see that */
|
|
|
|
#ifdef __ARM_ARCH_4__
|
|
mov pc, lr
|
|
#else
|
|
bx lr
|
|
#endif
|
|
|
|
ENDPROC(relocate_code)
|
|
|
|
_image_copy_start_ofs:
|
|
.word __image_copy_start - relocate_code
|
|
_image_copy_end_ofs:
|
|
.word __image_copy_end - relocate_code
|
|
_rel_dyn_start_ofs:
|
|
.word __rel_dyn_start - relocate_code
|
|
_rel_dyn_end_ofs:
|
|
.word __rel_dyn_end - relocate_code
|