mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
014a31907a
Add support for max_link_speed specified in the PCI DT binding. Signed-off-by: Jon Lin <jon.lin@rock-chips.com> [eugen.hristev@collabora.com: port to latest API, set default correctly, align to 80 chars] Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> [jonas@kwiboo.se: switch to dev_read_u32_default] Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
486 lines
12 KiB
C
486 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Rockchip DesignWare based PCIe host controller driver
|
|
*
|
|
* Copyright (c) 2021 Rockchip, Inc.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <generic-phy.h>
|
|
#include <pci.h>
|
|
#include <power-domain.h>
|
|
#include <reset.h>
|
|
#include <syscon.h>
|
|
#include <asm/arch-rockchip/clock.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <asm-generic/gpio.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/delay.h>
|
|
#include <power/regulator.h>
|
|
|
|
#include "pcie_dw_common.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/**
|
|
* struct rk_pcie - RK DW PCIe controller state
|
|
*
|
|
* @vpcie3v3: The 3.3v power supply for slot
|
|
* @apb_base: The base address of vendor regs
|
|
* @rst_gpio: The #PERST signal for slot
|
|
*/
|
|
struct rk_pcie {
|
|
/* Must be first member of the struct */
|
|
struct pcie_dw dw;
|
|
struct udevice *vpcie3v3;
|
|
void *apb_base;
|
|
struct phy phy;
|
|
struct clk_bulk clks;
|
|
struct reset_ctl_bulk rsts;
|
|
struct gpio_desc rst_gpio;
|
|
u32 gen;
|
|
};
|
|
|
|
/* Parameters for the waiting for iATU enabled routine */
|
|
#define PCIE_CLIENT_GENERAL_DEBUG 0x104
|
|
#define PCIE_CLIENT_HOT_RESET_CTRL 0x180
|
|
#define PCIE_LTSSM_ENABLE_ENHANCE BIT(4)
|
|
#define PCIE_CLIENT_LTSSM_STATUS 0x300
|
|
#define SMLH_LINKUP BIT(16)
|
|
#define RDLH_LINKUP BIT(17)
|
|
#define PCIE_CLIENT_DBG_FIFO_MODE_CON 0x310
|
|
#define PCIE_CLIENT_DBG_FIFO_PTN_HIT_D0 0x320
|
|
#define PCIE_CLIENT_DBG_FIFO_PTN_HIT_D1 0x324
|
|
#define PCIE_CLIENT_DBG_FIFO_TRN_HIT_D0 0x328
|
|
#define PCIE_CLIENT_DBG_FIFO_TRN_HIT_D1 0x32c
|
|
#define PCIE_CLIENT_DBG_FIFO_STATUS 0x350
|
|
#define PCIE_CLIENT_DBG_TRANSITION_DATA 0xffff0000
|
|
#define PCIE_CLIENT_DBF_EN 0xffff0003
|
|
|
|
/* Parameters for the waiting for #perst signal */
|
|
#define MACRO_US 1000
|
|
|
|
static int rk_pcie_read(void __iomem *addr, int size, u32 *val)
|
|
{
|
|
if ((uintptr_t)addr & (size - 1)) {
|
|
*val = 0;
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (size == 4) {
|
|
*val = readl(addr);
|
|
} else if (size == 2) {
|
|
*val = readw(addr);
|
|
} else if (size == 1) {
|
|
*val = readb(addr);
|
|
} else {
|
|
*val = 0;
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk_pcie_write(void __iomem *addr, int size, u32 val)
|
|
{
|
|
if ((uintptr_t)addr & (size - 1))
|
|
return -EOPNOTSUPP;
|
|
|
|
if (size == 4)
|
|
writel(val, addr);
|
|
else if (size == 2)
|
|
writew(val, addr);
|
|
else if (size == 1)
|
|
writeb(val, addr);
|
|
else
|
|
return -ENODEV;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 __rk_pcie_read_apb(struct rk_pcie *rk_pcie, void __iomem *base,
|
|
u32 reg, size_t size)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = rk_pcie_read(base + reg, size, &val);
|
|
if (ret)
|
|
dev_err(rk_pcie->dw.dev, "Read APB address failed\n");
|
|
|
|
return val;
|
|
}
|
|
|
|
static void __rk_pcie_write_apb(struct rk_pcie *rk_pcie, void __iomem *base,
|
|
u32 reg, size_t size, u32 val)
|
|
{
|
|
int ret;
|
|
|
|
ret = rk_pcie_write(base + reg, size, val);
|
|
if (ret)
|
|
dev_err(rk_pcie->dw.dev, "Write APB address failed\n");
|
|
}
|
|
|
|
/**
|
|
* rk_pcie_readl_apb() - Read vendor regs
|
|
*
|
|
* @rk_pcie: Pointer to the PCI controller state
|
|
* @reg: Offset of regs
|
|
*/
|
|
static inline u32 rk_pcie_readl_apb(struct rk_pcie *rk_pcie, u32 reg)
|
|
{
|
|
return __rk_pcie_read_apb(rk_pcie, rk_pcie->apb_base, reg, 0x4);
|
|
}
|
|
|
|
/**
|
|
* rk_pcie_writel_apb() - Write vendor regs
|
|
*
|
|
* @rk_pcie: Pointer to the PCI controller state
|
|
* @reg: Offset of regs
|
|
* @val: Value to be writen
|
|
*/
|
|
static inline void rk_pcie_writel_apb(struct rk_pcie *rk_pcie, u32 reg,
|
|
u32 val)
|
|
{
|
|
__rk_pcie_write_apb(rk_pcie, rk_pcie->apb_base, reg, 0x4, val);
|
|
}
|
|
|
|
/**
|
|
* rk_pcie_configure() - Configure link capabilities and speed
|
|
*
|
|
* @rk_pcie: Pointer to the PCI controller state
|
|
* @cap_speed: The capabilities and speed to configure
|
|
*
|
|
* Configure the link capabilities and speed in the PCIe root complex.
|
|
*/
|
|
static void rk_pcie_configure(struct rk_pcie *pci, u32 cap_speed)
|
|
{
|
|
dw_pcie_dbi_write_enable(&pci->dw, true);
|
|
|
|
clrsetbits_le32(pci->dw.dbi_base + PCIE_LINK_CAPABILITY,
|
|
TARGET_LINK_SPEED_MASK, cap_speed);
|
|
|
|
clrsetbits_le32(pci->dw.dbi_base + PCIE_LINK_CTL_2,
|
|
TARGET_LINK_SPEED_MASK, cap_speed);
|
|
|
|
dw_pcie_dbi_write_enable(&pci->dw, false);
|
|
}
|
|
|
|
static void rk_pcie_enable_debug(struct rk_pcie *rk_pcie)
|
|
{
|
|
rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_PTN_HIT_D0,
|
|
PCIE_CLIENT_DBG_TRANSITION_DATA);
|
|
rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_PTN_HIT_D1,
|
|
PCIE_CLIENT_DBG_TRANSITION_DATA);
|
|
rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_TRN_HIT_D0,
|
|
PCIE_CLIENT_DBG_TRANSITION_DATA);
|
|
rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_TRN_HIT_D1,
|
|
PCIE_CLIENT_DBG_TRANSITION_DATA);
|
|
rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_MODE_CON,
|
|
PCIE_CLIENT_DBF_EN);
|
|
}
|
|
|
|
static void rk_pcie_debug_dump(struct rk_pcie *rk_pcie)
|
|
{
|
|
u32 loop;
|
|
|
|
debug("ltssm = 0x%x\n",
|
|
rk_pcie_readl_apb(rk_pcie, PCIE_CLIENT_LTSSM_STATUS));
|
|
for (loop = 0; loop < 64; loop++)
|
|
debug("fifo_status = 0x%x\n",
|
|
rk_pcie_readl_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_STATUS));
|
|
}
|
|
|
|
static inline void rk_pcie_link_status_clear(struct rk_pcie *rk_pcie)
|
|
{
|
|
rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_GENERAL_DEBUG, 0x0);
|
|
}
|
|
|
|
static inline void rk_pcie_disable_ltssm(struct rk_pcie *rk_pcie)
|
|
{
|
|
rk_pcie_writel_apb(rk_pcie, 0x0, 0xc0008);
|
|
}
|
|
|
|
static inline void rk_pcie_enable_ltssm(struct rk_pcie *rk_pcie)
|
|
{
|
|
rk_pcie_writel_apb(rk_pcie, 0x0, 0xc000c);
|
|
}
|
|
|
|
static int is_link_up(struct rk_pcie *priv)
|
|
{
|
|
u32 val;
|
|
|
|
val = rk_pcie_readl_apb(priv, PCIE_CLIENT_LTSSM_STATUS);
|
|
if ((val & (RDLH_LINKUP | SMLH_LINKUP)) == 0x30000 &&
|
|
(val & GENMASK(5, 0)) == 0x11)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rk_pcie_link_up() - Wait for the link to come up
|
|
*
|
|
* @rk_pcie: Pointer to the PCI controller state
|
|
* @cap_speed: Desired link speed
|
|
*
|
|
* Return: 1 (true) for active line and negetive (false) for no link (timeout)
|
|
*/
|
|
static int rk_pcie_link_up(struct rk_pcie *priv, u32 cap_speed)
|
|
{
|
|
int retries;
|
|
|
|
if (is_link_up(priv)) {
|
|
printf("PCI Link already up before configuration!\n");
|
|
return 1;
|
|
}
|
|
|
|
/* DW pre link configurations */
|
|
rk_pcie_configure(priv, cap_speed);
|
|
|
|
/* Rest the device */
|
|
if (dm_gpio_is_valid(&priv->rst_gpio)) {
|
|
dm_gpio_set_value(&priv->rst_gpio, 0);
|
|
/*
|
|
* Minimal is 100ms from spec but we see
|
|
* some wired devices need much more, such as 600ms.
|
|
* Add a enough delay to cover all cases.
|
|
*/
|
|
udelay(MACRO_US * 1000);
|
|
dm_gpio_set_value(&priv->rst_gpio, 1);
|
|
}
|
|
|
|
rk_pcie_disable_ltssm(priv);
|
|
rk_pcie_link_status_clear(priv);
|
|
rk_pcie_enable_debug(priv);
|
|
|
|
/* Enable LTSSM */
|
|
rk_pcie_enable_ltssm(priv);
|
|
|
|
for (retries = 0; retries < 5; retries++) {
|
|
if (is_link_up(priv)) {
|
|
dev_info(priv->dw.dev, "PCIe Link up, LTSSM is 0x%x\n",
|
|
rk_pcie_readl_apb(priv, PCIE_CLIENT_LTSSM_STATUS));
|
|
rk_pcie_debug_dump(priv);
|
|
return 0;
|
|
}
|
|
|
|
dev_info(priv->dw.dev, "PCIe Linking... LTSSM is 0x%x\n",
|
|
rk_pcie_readl_apb(priv, PCIE_CLIENT_LTSSM_STATUS));
|
|
rk_pcie_debug_dump(priv);
|
|
udelay(MACRO_US * 1000);
|
|
}
|
|
|
|
dev_err(priv->dw.dev, "PCIe-%d Link Fail\n", dev_seq(priv->dw.dev));
|
|
/* Link maybe in Gen switch recovery but we need to wait more 1s */
|
|
udelay(MACRO_US * 1000);
|
|
return -EIO;
|
|
}
|
|
|
|
static int rockchip_pcie_init_port(struct udevice *dev)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
struct rk_pcie *priv = dev_get_priv(dev);
|
|
|
|
/* Set power and maybe external ref clk input */
|
|
if (priv->vpcie3v3) {
|
|
ret = regulator_set_value(priv->vpcie3v3, 3300000);
|
|
if (ret) {
|
|
dev_err(priv->dw.dev, "failed to enable vpcie3v3 (ret=%d)\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
udelay(MACRO_US * 1000);
|
|
|
|
ret = generic_phy_init(&priv->phy);
|
|
if (ret) {
|
|
dev_err(dev, "failed to init phy (ret=%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = generic_phy_power_on(&priv->phy);
|
|
if (ret) {
|
|
dev_err(dev, "failed to power on phy (ret=%d)\n", ret);
|
|
goto err_exit_phy;
|
|
}
|
|
|
|
ret = reset_deassert_bulk(&priv->rsts);
|
|
if (ret) {
|
|
dev_err(dev, "failed to deassert resets (ret=%d)\n", ret);
|
|
goto err_power_off_phy;
|
|
}
|
|
|
|
ret = clk_enable_bulk(&priv->clks);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable clks (ret=%d)\n", ret);
|
|
goto err_deassert_bulk;
|
|
}
|
|
|
|
/* LTSSM EN ctrl mode */
|
|
val = rk_pcie_readl_apb(priv, PCIE_CLIENT_HOT_RESET_CTRL);
|
|
val |= PCIE_LTSSM_ENABLE_ENHANCE | (PCIE_LTSSM_ENABLE_ENHANCE << 16);
|
|
rk_pcie_writel_apb(priv, PCIE_CLIENT_HOT_RESET_CTRL, val);
|
|
|
|
/* Set RC mode */
|
|
rk_pcie_writel_apb(priv, 0x0, 0xf00040);
|
|
pcie_dw_setup_host(&priv->dw);
|
|
|
|
ret = rk_pcie_link_up(priv, priv->gen);
|
|
if (ret < 0)
|
|
goto err_link_up;
|
|
|
|
return 0;
|
|
err_link_up:
|
|
clk_disable_bulk(&priv->clks);
|
|
err_deassert_bulk:
|
|
reset_assert_bulk(&priv->rsts);
|
|
err_power_off_phy:
|
|
generic_phy_power_off(&priv->phy);
|
|
err_exit_phy:
|
|
generic_phy_exit(&priv->phy);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rockchip_pcie_parse_dt(struct udevice *dev)
|
|
{
|
|
struct rk_pcie *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
priv->dw.dbi_base = dev_read_addr_index_ptr(dev, 0);
|
|
if (!priv->dw.dbi_base)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(dev, "DBI address is 0x%p\n", priv->dw.dbi_base);
|
|
|
|
priv->apb_base = dev_read_addr_index_ptr(dev, 1);
|
|
if (!priv->apb_base)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(dev, "APB address is 0x%p\n", priv->apb_base);
|
|
|
|
ret = gpio_request_by_name(dev, "reset-gpios", 0,
|
|
&priv->rst_gpio, GPIOD_IS_OUT);
|
|
if (ret) {
|
|
dev_err(dev, "failed to find reset-gpios property\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_get_bulk(dev, &priv->rsts);
|
|
if (ret) {
|
|
dev_err(dev, "Can't get reset: %d\n", ret);
|
|
goto rockchip_pcie_parse_dt_err_reset_get_bulk;
|
|
}
|
|
|
|
ret = clk_get_bulk(dev, &priv->clks);
|
|
if (ret) {
|
|
dev_err(dev, "Can't get clock: %d\n", ret);
|
|
goto rockchip_pcie_parse_dt_err_clk_get_bulk;
|
|
}
|
|
|
|
ret = device_get_supply_regulator(dev, "vpcie3v3-supply",
|
|
&priv->vpcie3v3);
|
|
if (ret && ret != -ENOENT) {
|
|
dev_err(dev, "failed to get vpcie3v3 supply (ret=%d)\n", ret);
|
|
goto rockchip_pcie_parse_dt_err_supply_regulator;
|
|
}
|
|
|
|
ret = generic_phy_get_by_index(dev, 0, &priv->phy);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get pcie phy (ret=%d)\n", ret);
|
|
goto rockchip_pcie_parse_dt_err_phy_get_by_index;
|
|
}
|
|
|
|
priv->gen = dev_read_u32_default(dev, "max-link-speed",
|
|
LINK_SPEED_GEN_3);
|
|
|
|
return 0;
|
|
|
|
rockchip_pcie_parse_dt_err_phy_get_by_index:
|
|
/* regulators don't need release */
|
|
rockchip_pcie_parse_dt_err_supply_regulator:
|
|
clk_release_bulk(&priv->clks);
|
|
rockchip_pcie_parse_dt_err_clk_get_bulk:
|
|
reset_release_bulk(&priv->rsts);
|
|
rockchip_pcie_parse_dt_err_reset_get_bulk:
|
|
dm_gpio_free(dev, &priv->rst_gpio);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* rockchip_pcie_probe() - Probe the PCIe bus for active link
|
|
*
|
|
* @dev: A pointer to the device being operated on
|
|
*
|
|
* Probe for an active link on the PCIe bus and configure the controller
|
|
* to enable this port.
|
|
*
|
|
* Return: 0 on success, else -ENODEV
|
|
*/
|
|
static int rockchip_pcie_probe(struct udevice *dev)
|
|
{
|
|
struct rk_pcie *priv = dev_get_priv(dev);
|
|
struct udevice *ctlr = pci_get_controller(dev);
|
|
struct pci_controller *hose = dev_get_uclass_priv(ctlr);
|
|
int ret = 0;
|
|
|
|
priv->dw.first_busno = dev_seq(dev);
|
|
priv->dw.dev = dev;
|
|
|
|
ret = rockchip_pcie_parse_dt(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = rockchip_pcie_init_port(dev);
|
|
if (ret)
|
|
goto rockchip_pcie_probe_err_init_port;
|
|
|
|
dev_info(dev, "PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n",
|
|
dev_seq(dev), pcie_dw_get_link_speed(&priv->dw),
|
|
pcie_dw_get_link_width(&priv->dw),
|
|
hose->first_busno);
|
|
|
|
|
|
ret = pcie_dw_prog_outbound_atu_unroll(&priv->dw,
|
|
PCIE_ATU_REGION_INDEX0,
|
|
PCIE_ATU_TYPE_MEM,
|
|
priv->dw.mem.phys_start,
|
|
priv->dw.mem.bus_start,
|
|
priv->dw.mem.size);
|
|
if (!ret)
|
|
return ret;
|
|
|
|
rockchip_pcie_probe_err_init_port:
|
|
clk_release_bulk(&priv->clks);
|
|
reset_release_bulk(&priv->rsts);
|
|
dm_gpio_free(dev, &priv->rst_gpio);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dm_pci_ops rockchip_pcie_ops = {
|
|
.read_config = pcie_dw_read_config,
|
|
.write_config = pcie_dw_write_config,
|
|
};
|
|
|
|
static const struct udevice_id rockchip_pcie_ids[] = {
|
|
{ .compatible = "rockchip,rk3568-pcie" },
|
|
{ .compatible = "rockchip,rk3588-pcie" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rockchip_dw_pcie) = {
|
|
.name = "pcie_dw_rockchip",
|
|
.id = UCLASS_PCI,
|
|
.of_match = rockchip_pcie_ids,
|
|
.ops = &rockchip_pcie_ops,
|
|
.probe = rockchip_pcie_probe,
|
|
.priv_auto = sizeof(struct rk_pcie),
|
|
};
|