mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 06:00:43 +00:00
c46bf09e0b
adresses/addresses alernate/alternate asssuming/assuming calcualted/calculated enviroment/environment evalutation/evaluation falsh/flash labled/labeled paramaters/parameters Signed-off-by: Thomas Weber <thomas@tomweber.eu> Acked-by: Anatolij Gustschin <agust@denx.de>
124 lines
4.5 KiB
Text
124 lines
4.5 KiB
Text
Atmel AT91 Evaluation kits
|
|
|
|
http://atmel.com/dyn/products/tools.asp?family_id=605#1443
|
|
|
|
I. Board mapping & boot media
|
|
------------------------------------------------------------------------------
|
|
AT91SAM9260EK, AT91SAM9G20EK & AT91SAM9XEEK
|
|
------------------------------------------------------------------------------
|
|
|
|
Memory map
|
|
0x20000000 - 23FFFFFF SDRAM (64 MB)
|
|
0xC0000000 - Cxxxxxxx Atmel Dataflash card (J13)
|
|
0xD0000000 - Dxxxxxxx Soldered Atmel Dataflash
|
|
|
|
Environment variables
|
|
|
|
U-Boot environment variables can be stored at different places:
|
|
- Dataflash on SPI chip select 1 (default)
|
|
- Dataflash on SPI chip select 0 (dataflash card)
|
|
- Nand flash.
|
|
|
|
You can choose your storage location at config step (here for at91sam9260ek) :
|
|
make at91sam9260ek_config - use data flash (spi cs1) (default)
|
|
make at91sam9260ek_nandflash_config - use nand flash
|
|
make at91sam9260ek_dataflash_cs0_config - use data flash (spi cs0)
|
|
make at91sam9260ek_dataflash_cs1_config - use data flash (spi cs1)
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
AT91SAM9261EK, AT91SAM9G10EK
|
|
------------------------------------------------------------------------------
|
|
|
|
Memory map
|
|
0x20000000 - 23FFFFFF SDRAM (64 MB)
|
|
0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash
|
|
0xD0000000 - Dxxxxxxx Atmel Dataflash card (J22)
|
|
|
|
Environment variables
|
|
|
|
U-Boot environment variables can be stored at different places:
|
|
- Dataflash on SPI chip select 0 (default)
|
|
- Dataflash on SPI chip select 3 (dataflash card)
|
|
- Nand flash.
|
|
|
|
You can choose your storage location at config step (here for at91sam9260ek) :
|
|
make at91sam9261ek_config - use data flash (spi cs0) (default)
|
|
make at91sam9261ek_nandflash_config - use nand flash
|
|
make at91sam9261ek_dataflash_cs0_config - use data flash (spi cs0)
|
|
make at91sam9261ek_dataflash_cs3_config - use data flash (spi cs3)
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
AT91SAM9263EK
|
|
------------------------------------------------------------------------------
|
|
|
|
Memory map
|
|
0x20000000 - 23FFFFFF SDRAM (64 MB)
|
|
0xC0000000 - Cxxxxxxx Atmel Dataflash card (J9)
|
|
|
|
Environment variables
|
|
|
|
U-Boot environment variables can be stored at different places:
|
|
- Dataflash on SPI chip select 0 (dataflash card)
|
|
- Nand flash.
|
|
- Nor flash (not populate by default)
|
|
|
|
You can choose your storage location at config step (here for at91sam9260ek) :
|
|
make at91sam9263ek_config - use data flash (spi cs0) (default)
|
|
make at91sam9263ek_nandflash_config - use nand flash
|
|
make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)
|
|
make at91sam9263ek_norflash_config - use nor flash
|
|
|
|
You can choose to boot directly from U-Boot at config step
|
|
make at91sam9263ek_norflash_boot_config - boot from nor flash
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
AT91SAM9M10G45EK
|
|
------------------------------------------------------------------------------
|
|
|
|
Memory map
|
|
0x20000000 - 23FFFFFF SDRAM (64 MB)
|
|
0xC0000000 - Cxxxxxxx Atmel Dataflash card (J12)
|
|
|
|
Environment variables
|
|
|
|
U-Boot environment variables can be stored at different places:
|
|
- Dataflash on SPI chip select 0 (dataflash card)
|
|
- Nand flash.
|
|
|
|
You can choose your storage location at config step (here for at91sam9m10g45ek) :
|
|
make at91sam9m10g45ek_config - use data flash (spi cs0) (default)
|
|
make at91sam9m10g45ek_nandflash_config - use nand flash
|
|
make at91sam9m10g45ek_dataflash_cs0_config - use data flash (spi cs0)
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
AT91SAM9RLEK
|
|
------------------------------------------------------------------------------
|
|
|
|
Memory map
|
|
0x20000000 - 23FFFFFF SDRAM (64 MB)
|
|
0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash
|
|
|
|
Environment variables
|
|
|
|
U-Boot environment variables can be stored at different places:
|
|
- Dataflash on SPI chip select 0
|
|
- Nand flash.
|
|
|
|
You can choose your storage location at config step (here for at91sam9260ek) :
|
|
make at91sam9263ek_config - use data flash (spi cs0) (default)
|
|
make at91sam9263ek_nandflash_config - use nand flash
|
|
make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)
|
|
|
|
II. Watchdog support
|
|
|
|
For security reasons, the at91 watchdog is running at boot time and,
|
|
if deactivated, cannot be used anymore.
|
|
If you want to use the watchdog, you will need to keep it running in
|
|
your code (make sure not to disable it in AT91Bootstrap for instance).
|
|
|
|
In the U-Boot configuration, the AT91 watchdog support is enabled using
|
|
the CONFIG_AT91SAM9_WATCHDOG and CONFIG_HW_WATCHDOG options.
|