mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 07:01:24 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
355 lines
11 KiB
C
355 lines
11 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2017
|
|
* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include "mx6_common.h"
|
|
|
|
/* Falcon Mode */
|
|
#define CONFIG_CMD_SPL
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
|
|
#define CONFIG_CMD_SPL_WRITE_SIZE (44 * SZ_1K)
|
|
|
|
/* Falcon Mode - MMC support */
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x3F00
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS \
|
|
(CONFIG_CMD_SPL_WRITE_SIZE / 512)
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x100 /* 128KiB */
|
|
|
|
/*
|
|
* display5 SPI-NOR memory layout
|
|
*
|
|
* The definition can be found in Kconfig's
|
|
* CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT
|
|
*
|
|
* 0x000000 - 0x020000 : SPI.SPL (128KiB)
|
|
* 0x020000 - 0x120000 : SPI.u-boot (1MiB)
|
|
* 0x120000 - 0x130000 : SPI.u-boot-env1 (64KiB)
|
|
* 0x130000 - 0x140000 : SPI.u-boot-env2 (64KiB)
|
|
* 0x140000 - 0x540000 : SPI.swupdate-kernel-FIT (4MiB)
|
|
* 0x540000 - 0x1540000 : SPI.swupdate-initramfs (16MiB)
|
|
* 0x1540000 - 0x1640000 : SPI.factory (1MiB)
|
|
*/
|
|
|
|
/* SPI Flash Configs */
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
#undef CONFIG_DM_SPI
|
|
#undef CONFIG_DM_SPI_FLASH
|
|
#endif
|
|
|
|
/* Below values are "dummy" - only to avoid build break */
|
|
#define CONFIG_SYS_SPI_KERNEL_OFFS 0x150000
|
|
#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000
|
|
#define CONFIG_SYS_SPI_ARGS_SIZE 0x10000
|
|
|
|
#include "imx6_spl.h"
|
|
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
#define CONFIG_REVISION_TAG
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
|
|
|
|
#define CONFIG_MXC_UART_BASE UART5_BASE
|
|
|
|
/* I2C Configs */
|
|
#define CONFIG_I2C_MULTI_BUS
|
|
|
|
/* MMC Configs */
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#ifndef CONFIG_BOOTCOMMAND
|
|
#define CONFIG_BOOTCOMMAND "if run check_em_pad; then " \
|
|
"run recovery;" \
|
|
"else if test ${BOOT_FROM} = FACTORY; then " \
|
|
"run factory_nfs;" \
|
|
"else " \
|
|
"run boot_mmc;" \
|
|
"fi;fi"
|
|
#endif
|
|
|
|
#define PARTS_DEFAULT \
|
|
/* Linux partitions */ \
|
|
"partitions=" \
|
|
"uuid_disk=${uuid_gpt_disk};" \
|
|
"name=kernel_raw1,start=128K,size=8M,uuid=${uuid_gpt_kernel_raw1};" \
|
|
"name=rootfs1,size=1528M,uuid=${uuid_gpt_rootfs1};" \
|
|
"name=kernel_raw2,size=8M,uuid=${uuid_gpt_kernel_raw2};" \
|
|
"name=rootfs2,size=512M,uuid=${uuid_gpt_rootfs2};" \
|
|
"name=data,size=-,uuid=${uuid_gpt_data}\0"
|
|
|
|
#define SWUPDATE_RECOVERY_PROCEDURE \
|
|
"echo '#######################';" \
|
|
"echo '# RECOVERY SWUupdate #';" \
|
|
"echo '#######################';" \
|
|
"echo '#######################';" \
|
|
"echo '# GPT verify #';" \
|
|
"if gpt verify mmc ${mmcdev} ${partitions}; then " \
|
|
"echo '# OK ! #';" \
|
|
"else " \
|
|
"echo '# FAILED ! #';" \
|
|
"echo '# GPT RESTORATION #';" \
|
|
"gpt write mmc ${mmcdev} ${partitions};" \
|
|
"fi;" \
|
|
"echo '#######################';" \
|
|
"setenv loadaddr_swu_initramfs 0x14000000;" \
|
|
"setenv bootargs console=${console} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
|
":${hostname}::off root=/dev/ram rw;" \
|
|
"sf probe;" \
|
|
"sf read ${loadaddr} swu-kernel;" \
|
|
"sf read ${loadaddr_swu_initramfs} swu-initramfs;" \
|
|
"bootm ${loadaddr} ${loadaddr_swu_initramfs};reset;"
|
|
|
|
#define SETUP_BOOTARGS \
|
|
"run set_rootfs_part;" \
|
|
"setenv bootargs ${bootargs} console=${console} " \
|
|
"root=/dev/mmcblk${mmcdev}p${rootfs_part} " \
|
|
"rootwait rootfstype=ext4 rw; " \
|
|
"run set_kernel_part;" \
|
|
"part start mmc ${mmcdev} ${kernel_part} lba_start; " \
|
|
"mmc read ${loadaddr} ${lba_start} ${fitImg_fw_sz}; " \
|
|
"setenv fdt_conf imx6q-${board}-${display}.dtb; "
|
|
|
|
/* All the numbers are in LBAs */
|
|
#define __TFTP_UPDATE_KERNEL \
|
|
"tftp_mmc_fitImg=" \
|
|
"if test ! -n ${kernel_part}; then " \
|
|
"setenv kernel_part ${kernel_part_active};" \
|
|
"fi;" \
|
|
"if tftp ${loadaddr} ${kernel_file}; then " \
|
|
"setexpr fw_sz ${filesize} / 0x200; " \
|
|
"setexpr fw_sz ${fw_sz} + 1; " \
|
|
"part start mmc ${mmcdev} ${kernel_part} lba_start; " \
|
|
"mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
|
|
"; fi\0" \
|
|
|
|
#define TFTP_UPDATE_KERNEL \
|
|
"setenv kernel_part ${kernel_part_active};" \
|
|
"run tftp_mmc_fitImg;" \
|
|
"setenv kernel_part ${kernel_part_backup};" \
|
|
"run tftp_mmc_fitImg;" \
|
|
|
|
#define __TFTP_UPDATE_ROOTFS \
|
|
"tftp_mmc_rootfs=" \
|
|
"if test ! -n ${rootfs_part}; then " \
|
|
"setenv rootfs_part ${rootfs_part_active};" \
|
|
"fi;" \
|
|
"if tftp ${loadaddr} ${rootfs_file}; then " \
|
|
"setexpr fw_sz ${filesize} / 0x200; " \
|
|
"setexpr fw_sz ${fw_sz} + 1; " \
|
|
"part start mmc ${mmcdev} ${rootfs_part} lba_start; " \
|
|
"mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
|
|
"; fi\0" \
|
|
|
|
#define TFTP_UPDATE_ROOTFS \
|
|
"setenv rootfs_part ${rootfs_part_active};" \
|
|
"run tftp_mmc_rootfs;" \
|
|
"run tftp_mmc_rootfs_bkp;" \
|
|
|
|
|
|
#define TFTP_UPDATE_RECOVERY_SWU_KERNEL \
|
|
"tftp_sf_fitImg_SWU=" \
|
|
"if tftp ${loadaddr} ${kernel_file}; then " \
|
|
"sf probe;" \
|
|
"sf erase swu-kernel +${filesize};" \
|
|
"sf write ${loadaddr} swu-kernel ${filesize};" \
|
|
"; fi\0" \
|
|
|
|
#define TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
|
|
"swu_initramfs_file=swupdate-image-display5.ext4.gz.u-boot\0" \
|
|
"tftp_sf_initramfs_SWU=" \
|
|
"if tftp ${loadaddr} ${swu_initramfs_file}; then " \
|
|
"sf probe;" \
|
|
"sf erase swu-initramfs +${filesize};" \
|
|
"sf write ${loadaddr} swu-initramfs ${filesize};" \
|
|
"; fi\0" \
|
|
|
|
#define TFTP_UPDATE_BOOTLOADER \
|
|
"ubootfile=u-boot.img\0" \
|
|
"ubootfileSPL=SPL\0" \
|
|
"tftp_sf_uboot=" \
|
|
"if tftp ${loadaddr} ${ubootfile}; then " \
|
|
"sf probe;" \
|
|
"sf erase u-boot +${filesize};" \
|
|
"sf write ${loadaddr} u-boot ${filesize}" \
|
|
"; fi\0" \
|
|
"tftp_sf_SPL=" \
|
|
"if tftp ${loadaddr} ${ubootfileSPL}; then " \
|
|
"sf probe;" \
|
|
"setexpr uboot_SPL_size ${filesize} + 0x400;" \
|
|
"sf erase 0x0 +${uboot_SPL_size};" \
|
|
"sf write ${loadaddr} 0x400 ${filesize};" \
|
|
"fi\0" \
|
|
|
|
#define TFTP_UPDATE_SPINOR \
|
|
"spinorfile=core-image-lwn-display5.spinor\0" \
|
|
"spinorsize=0x2000000\0" \
|
|
"tftp_sf_img=" \
|
|
"if tftp ${loadaddr} ${spinorfile}; then " \
|
|
"sf probe;" \
|
|
"sf erase 0x0 ${spinorsize};" \
|
|
"sf write ${loadaddr} 0x0 ${filesize};" \
|
|
"fi\0" \
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
PARTS_DEFAULT \
|
|
"gpio_recovery=93\0" \
|
|
"check_em_pad=gpio input ${gpio_recovery};test $? -eq 0;\0" \
|
|
"display=tianma-tm070-800x480\0" \
|
|
"board=display5\0" \
|
|
"mmcdev=0\0" \
|
|
"altbootcmd=run recovery\0" \
|
|
"bootdelay=1\0" \
|
|
"baudrate=115200\0" \
|
|
"bootcmd=" CONFIG_BOOTCOMMAND "\0" \
|
|
"ethact=FEC\0" \
|
|
"netdev=eth0\0" \
|
|
"boot_os=y\0" \
|
|
"hostname=display5\0" \
|
|
"loadaddr=0x12000000\0" \
|
|
"fdtaddr=0x12800000\0" \
|
|
"console=ttymxc4,115200 quiet cma=256M\0" \
|
|
"fdtfile=imx6q-display5.dtb\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"kernel_file=fitImage\0" \
|
|
"fitImg_fw_sz=0x2200\0" \
|
|
"up=run tftp_sf_SPL; run tftp_sf_uboot\0" \
|
|
"download_kernel=" \
|
|
"tftpboot ${loadaddr} ${kernel_file};\0" \
|
|
"factory_nfs=" \
|
|
"setenv ipaddr 192.168.1.102;" \
|
|
"setenv gatewayip 192.168.1.1;" \
|
|
"setenv netmask 255.255.255.0;" \
|
|
"setenv serverip 192.168.1.2;" \
|
|
"echo BOOT: FACTORY (LEG);" \
|
|
"run boot_nfs\0" \
|
|
"boot_swu_recovery=" SWUPDATE_RECOVERY_PROCEDURE "\0" \
|
|
"recovery=" \
|
|
"echo BOOT: RECOVERY: SWU;" \
|
|
"run boot_swu_recovery\0" \
|
|
"boot_tftp=" \
|
|
"if run download_kernel; then " \
|
|
"setenv bootargs console=${console} " \
|
|
"root=/dev/mmcblk0p2 rootwait;" \
|
|
"bootm ${loadaddr} - ${fdtaddr};reset;" \
|
|
"fi\0" \
|
|
"addip=setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
|
|
"${hostname}:eth0:on" \
|
|
"\0" \
|
|
"nfsargs=setenv bootargs " \
|
|
"root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath},nolock,nfsvers=3" \
|
|
"\0" \
|
|
"rootpath=/srv/tftp/DISP5/rootfs\0" \
|
|
"boot_nfs=" \
|
|
"if run download_kernel; then " \
|
|
"run nfsargs;" \
|
|
"run addip;" \
|
|
"setenv bootargs ${bootargs} console=${console};" \
|
|
"setenv fdt_conf imx6q-${board}-${display}.dtb; " \
|
|
"bootm ${loadaddr}#conf@${fdt_conf};reset;" \
|
|
"fi\0" \
|
|
"falcon_setup=" \
|
|
"if mmc dev ${mmcdev}; then " \
|
|
SETUP_BOOTARGS \
|
|
"spl export fdt ${loadaddr}#conf@${fdt_conf};" \
|
|
"setexpr fw_sz ${fdtargslen} / 0x200; " \
|
|
"setexpr fw_sz ${fw_sz} + 1; " \
|
|
"mmc write ${fdtargsaddr} " \
|
|
__stringify(CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR)" ${fw_sz}; " \
|
|
"fi\0" \
|
|
"boot_mmc=" \
|
|
"if mmc dev ${mmcdev}; then " \
|
|
SETUP_BOOTARGS \
|
|
"bootm ${loadaddr}#conf@${fdt_conf};reset;" \
|
|
"fi\0" \
|
|
"set_kernel_part=" \
|
|
"if test ${BOOT_FROM} = ACTIVE; then " \
|
|
"setenv kernel_part ${kernel_part_active};" \
|
|
"echo BOOT: ACTIVE;" \
|
|
"else if test ${BOOT_FROM} = BACKUP; then " \
|
|
"setenv kernel_part ${kernel_part_backup};" \
|
|
"echo BOOT: BACKUP;" \
|
|
"else " \
|
|
"run recovery;" \
|
|
"fi;fi\0" \
|
|
"set_rootfs_part=" \
|
|
"if test ${BOOT_FROM} = ACTIVE; then " \
|
|
"setenv rootfs_part ${rootfs_part_active};" \
|
|
"else if test ${BOOT_FROM} = BACKUP; then " \
|
|
"setenv rootfs_part ${rootfs_part_backup};" \
|
|
"else " \
|
|
"run recovery;" \
|
|
"fi;fi\0" \
|
|
"BOOT_FROM=ACTIVE\0" \
|
|
TFTP_UPDATE_BOOTLOADER \
|
|
TFTP_UPDATE_SPINOR \
|
|
"kernel_part_active=1\0" \
|
|
"kernel_part_backup=3\0" \
|
|
__TFTP_UPDATE_KERNEL \
|
|
"rootfs_part_active=2\0" \
|
|
"rootfs_part_backup=4\0" \
|
|
"rootfs_file=core-image-lwn-display5.ext4\0" \
|
|
"rootfs_file_backup=core-image-lwn-backup-display5.ext4\0" \
|
|
__TFTP_UPDATE_ROOTFS \
|
|
"tftp_mmc_rootfs_bkp=" \
|
|
"setenv rootfs_part ${rootfs_part_backup};" \
|
|
"setenv rootfs_file ${rootfs_file_backup};" \
|
|
"run tftp_mmc_rootfs\0" \
|
|
TFTP_UPDATE_RECOVERY_SWU_KERNEL \
|
|
TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
|
|
"\0" \
|
|
|
|
/* Miscellaneous configurable options */
|
|
#undef CONFIG_SYS_CBSIZE
|
|
#define CONFIG_SYS_CBSIZE 2048
|
|
|
|
/* Print Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_MAXARGS 32
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
|
|
#define CONFIG_STANDALONE_LOAD_ADDR 0x10001000
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* Watchdog */
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
#undef CONFIG_WDT
|
|
#undef CONFIG_WATCHDOG
|
|
#define CONFIG_HW_WATCHDOG
|
|
#endif
|
|
|
|
/* ENV config */
|
|
#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
|
|
/* The 0x120000 value corresponds to above SPI-NOR memory MAP */
|
|
#endif
|
|
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#endif /* __CONFIG_H */
|