u-boot/arch/arm/cpu/armv7/ls102xa/fdt.c
Masahiro Yamada b08c8c4870 libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>
Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
  include/libfdt.h         -> include/linux/libfdt.h
  include/libfdt_env.h     -> include/linux/libfdt_env.h

and replaces include directives:
  #include <libfdt.h>      -> #include <linux/libfdt.h>
  #include <libfdt_env.h>  -> #include <linux/libfdt_env.h>

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05 10:16:28 -05:00

180 lines
4.8 KiB
C

/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <linux/libfdt.h>
#include <fdt_support.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/arch/clock.h>
#include <linux/ctype.h>
#ifdef CONFIG_FSL_ESDHC
#include <fsl_esdhc.h>
#endif
#include <tsec.h>
#include <asm/arch/immap_ls102xa.h>
#include <fsl_sec.h>
DECLARE_GLOBAL_DATA_PTR;
void ft_fixup_enet_phy_connect_type(void *fdt)
{
struct eth_device *dev;
struct tsec_private *priv;
const char *enet_path, *phy_path;
char enet[16];
char phy[16];
int phy_node;
int i = 0;
uint32_t ph;
char *name[3] = { "eTSEC1", "eTSEC2", "eTSEC3" };
for (; i < ARRAY_SIZE(name); i++) {
dev = eth_get_dev_by_name(name[i]);
if (dev) {
sprintf(enet, "ethernet%d", i);
sprintf(phy, "enet%d_rgmii_phy", i);
} else {
continue;
}
priv = dev->priv;
if (priv->flags & TSEC_SGMII)
continue;
enet_path = fdt_get_alias(fdt, enet);
if (!enet_path)
continue;
phy_path = fdt_get_alias(fdt, phy);
if (!phy_path)
continue;
phy_node = fdt_path_offset(fdt, phy_path);
if (phy_node < 0)
continue;
ph = fdt_create_phandle(fdt, phy_node);
if (ph)
do_fixup_by_path_u32(fdt, enet_path,
"phy-handle", ph, 1);
do_fixup_by_path(fdt, enet_path, "phy-connection-type",
phy_string_for_interface(
PHY_INTERFACE_MODE_RGMII_ID),
sizeof(phy_string_for_interface(
PHY_INTERFACE_MODE_RGMII_ID)),
1);
}
}
void ft_cpu_setup(void *blob, bd_t *bd)
{
int off;
int val;
const char *sysclk_path;
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
unsigned int svr;
svr = in_be32(&gur->svr);
unsigned long busclk = get_bus_freq(0);
/* delete crypto node if not on an E-processor */
if (!IS_E_PROCESSOR(svr))
fdt_fixup_crypto_node(blob, 0);
#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
else {
ccsr_sec_t __iomem *sec;
sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
}
#endif
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
while (off != -FDT_ERR_NOTFOUND) {
val = gd->cpu_clk;
fdt_setprop(blob, off, "clock-frequency", &val, 4);
off = fdt_node_offset_by_prop_value(blob, off,
"device_type", "cpu", 4);
}
do_fixup_by_prop_u32(blob, "device_type", "soc",
4, "bus-frequency", busclk, 1);
ft_fixup_enet_phy_connect_type(blob);
#ifdef CONFIG_SYS_NS16550
do_fixup_by_compat_u32(blob, "fsl,16550-FIFO64",
"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#endif
sysclk_path = fdt_get_alias(blob, "sysclk");
if (sysclk_path)
do_fixup_by_path_u32(blob, sysclk_path, "clock-frequency",
CONFIG_SYS_CLK_FREQ, 1);
do_fixup_by_compat_u32(blob, "fsl,qoriq-sysclk-2.0",
"clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
#if defined(CONFIG_DEEP_SLEEP) && defined(CONFIG_SD_BOOT)
#define UBOOT_HEAD_LEN 0x1000
/*
* Reserved memory in SD boot deep sleep case.
* Second stage uboot binary and malloc space should be reserved.
* If the memory they occupied has not been reserved, then this
* space would be used by kernel and overwritten in uboot when
* deep sleep resume, which cause deep sleep failed.
* Since second uboot binary has a head, that space need to be
* reserved either(assuming its size is less than 0x1000).
*/
off = fdt_add_mem_rsv(blob, CONFIG_SYS_TEXT_BASE - UBOOT_HEAD_LEN,
CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_SPL_MALLOC_SIZE +
UBOOT_HEAD_LEN);
if (off < 0)
printf("Failed to reserve memory for SD boot deep sleep: %s\n",
fdt_strerror(off));
#endif
#if defined(CONFIG_FSL_ESDHC)
fdt_fixup_esdhc(blob, bd);
#endif
/*
* platform bus clock = system bus clock/2
* Here busclk = system bus clock
* We are using the platform bus clock as 1588 Timer reference
* clock source select
*/
do_fixup_by_compat_u32(blob, "fsl, gianfar-ptp-timer",
"timer-frequency", busclk / 2, 1);
/*
* clock-freq should change to clock-frequency and
* flexcan-v1.0 should change to p1010-flexcan respectively
* in the future.
*/
do_fixup_by_compat_u32(blob, "fsl, flexcan-v1.0",
"clock_freq", busclk / 2, 1);
do_fixup_by_compat_u32(blob, "fsl, flexcan-v1.0",
"clock-frequency", busclk / 2, 1);
do_fixup_by_compat_u32(blob, "fsl, ls1021a-flexcan",
"clock-frequency", busclk / 2, 1);
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
off = fdt_node_offset_by_compat_reg(blob, FSL_IFC_COMPAT,
CONFIG_SYS_IFC_ADDR);
fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
#else
off = fdt_node_offset_by_compat_reg(blob, FSL_QSPI_COMPAT,
QSPI0_BASE_ADDR);
fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
off = fdt_node_offset_by_compat_reg(blob, FSL_DSPI_COMPAT,
DSPI1_BASE_ADDR);
fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
#endif
}