mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
517 lines
12 KiB
C
517 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2009 BuS Elektronik GmbH & Co. KG
|
|
* Jens Scharsig (esw@bus-elektronik.de)
|
|
*
|
|
* (C) Copyright 2003
|
|
* Author : Hamid Ikdoumi (Atmel)
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/at91_emac.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/at91_pio.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
#include <linux/mii.h>
|
|
|
|
#undef MII_DEBUG
|
|
#undef ET_DEBUG
|
|
|
|
#if (CONFIG_SYS_RX_ETH_BUFFER > 1024)
|
|
#error AT91 EMAC supports max 1024 RX buffers. \
|
|
Please decrease the CONFIG_SYS_RX_ETH_BUFFER value
|
|
#endif
|
|
|
|
#ifndef CONFIG_DRIVER_AT91EMAC_PHYADDR
|
|
#define CONFIG_DRIVER_AT91EMAC_PHYADDR 0
|
|
#endif
|
|
|
|
/* MDIO clock must not exceed 2.5 MHz, so enable MCK divider */
|
|
#if (AT91C_MASTER_CLOCK > 80000000)
|
|
#define HCLK_DIV AT91_EMAC_CFG_MCLK_64
|
|
#elif (AT91C_MASTER_CLOCK > 40000000)
|
|
#define HCLK_DIV AT91_EMAC_CFG_MCLK_32
|
|
#elif (AT91C_MASTER_CLOCK > 20000000)
|
|
#define HCLK_DIV AT91_EMAC_CFG_MCLK_16
|
|
#else
|
|
#define HCLK_DIV AT91_EMAC_CFG_MCLK_8
|
|
#endif
|
|
|
|
#ifdef ET_DEBUG
|
|
#define DEBUG_AT91EMAC 1
|
|
#else
|
|
#define DEBUG_AT91EMAC 0
|
|
#endif
|
|
|
|
#ifdef MII_DEBUG
|
|
#define DEBUG_AT91PHY 1
|
|
#else
|
|
#define DEBUG_AT91PHY 0
|
|
#endif
|
|
|
|
#ifndef CONFIG_DRIVER_AT91EMAC_QUIET
|
|
#define VERBOSEP 1
|
|
#else
|
|
#define VERBOSEP 0
|
|
#endif
|
|
|
|
#define RBF_ADDR 0xfffffffc
|
|
#define RBF_OWNER (1<<0)
|
|
#define RBF_WRAP (1<<1)
|
|
#define RBF_BROADCAST (1<<31)
|
|
#define RBF_MULTICAST (1<<30)
|
|
#define RBF_UNICAST (1<<29)
|
|
#define RBF_EXTERNAL (1<<28)
|
|
#define RBF_UNKNOWN (1<<27)
|
|
#define RBF_SIZE 0x07ff
|
|
#define RBF_LOCAL4 (1<<26)
|
|
#define RBF_LOCAL3 (1<<25)
|
|
#define RBF_LOCAL2 (1<<24)
|
|
#define RBF_LOCAL1 (1<<23)
|
|
|
|
#define RBF_FRAMEMAX CONFIG_SYS_RX_ETH_BUFFER
|
|
#define RBF_FRAMELEN 0x600
|
|
|
|
typedef struct {
|
|
unsigned long addr, size;
|
|
} rbf_t;
|
|
|
|
typedef struct {
|
|
rbf_t rbfdt[RBF_FRAMEMAX];
|
|
unsigned long rbindex;
|
|
} emac_device;
|
|
|
|
void at91emac_EnableMDIO(at91_emac_t *at91mac)
|
|
{
|
|
/* Mac CTRL reg set for MDIO enable */
|
|
writel(readl(&at91mac->ctl) | AT91_EMAC_CTL_MPE, &at91mac->ctl);
|
|
}
|
|
|
|
void at91emac_DisableMDIO(at91_emac_t *at91mac)
|
|
{
|
|
/* Mac CTRL reg set for MDIO disable */
|
|
writel(readl(&at91mac->ctl) & ~AT91_EMAC_CTL_MPE, &at91mac->ctl);
|
|
}
|
|
|
|
int at91emac_read(at91_emac_t *at91mac, unsigned char addr,
|
|
unsigned char reg, unsigned short *value)
|
|
{
|
|
unsigned long netstat;
|
|
at91emac_EnableMDIO(at91mac);
|
|
|
|
writel(AT91_EMAC_MAN_HIGH | AT91_EMAC_MAN_RW_R |
|
|
AT91_EMAC_MAN_REGA(reg) | AT91_EMAC_MAN_CODE_802_3 |
|
|
AT91_EMAC_MAN_PHYA(addr),
|
|
&at91mac->man);
|
|
|
|
do {
|
|
netstat = readl(&at91mac->sr);
|
|
debug_cond(DEBUG_AT91PHY, "poll SR %08lx\n", netstat);
|
|
} while (!(netstat & AT91_EMAC_SR_IDLE));
|
|
|
|
*value = readl(&at91mac->man) & AT91_EMAC_MAN_DATA_MASK;
|
|
|
|
at91emac_DisableMDIO(at91mac);
|
|
|
|
debug_cond(DEBUG_AT91PHY,
|
|
"AT91PHY read %p REG(%d)=%x\n", at91mac, reg, *value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int at91emac_write(at91_emac_t *at91mac, unsigned char addr,
|
|
unsigned char reg, unsigned short value)
|
|
{
|
|
unsigned long netstat;
|
|
debug_cond(DEBUG_AT91PHY,
|
|
"AT91PHY write %p REG(%d)=%p\n", at91mac, reg, &value);
|
|
|
|
at91emac_EnableMDIO(at91mac);
|
|
|
|
writel(AT91_EMAC_MAN_HIGH | AT91_EMAC_MAN_RW_W |
|
|
AT91_EMAC_MAN_REGA(reg) | AT91_EMAC_MAN_CODE_802_3 |
|
|
AT91_EMAC_MAN_PHYA(addr) | (value & AT91_EMAC_MAN_DATA_MASK),
|
|
&at91mac->man);
|
|
|
|
do {
|
|
netstat = readl(&at91mac->sr);
|
|
debug_cond(DEBUG_AT91PHY, "poll SR %08lx\n", netstat);
|
|
} while (!(netstat & AT91_EMAC_SR_IDLE));
|
|
|
|
at91emac_DisableMDIO(at91mac);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
|
|
|
|
at91_emac_t *get_emacbase_by_name(const char *devname)
|
|
{
|
|
struct eth_device *netdev;
|
|
|
|
netdev = eth_get_dev_by_name(devname);
|
|
return (at91_emac_t *) netdev->iobase;
|
|
}
|
|
|
|
int at91emac_mii_read(struct mii_dev *bus, int addr, int devad, int reg)
|
|
{
|
|
unsigned short value = 0;
|
|
at91_emac_t *emac;
|
|
|
|
emac = get_emacbase_by_name(bus->name);
|
|
at91emac_read(emac , addr, reg, &value);
|
|
return value;
|
|
}
|
|
|
|
|
|
int at91emac_mii_write(struct mii_dev *bus, int addr, int devad, int reg,
|
|
u16 value)
|
|
{
|
|
at91_emac_t *emac;
|
|
|
|
emac = get_emacbase_by_name(bus->name);
|
|
at91emac_write(emac, addr, reg, value);
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
static int at91emac_phy_reset(struct eth_device *netdev)
|
|
{
|
|
int i;
|
|
u16 status, adv;
|
|
at91_emac_t *emac;
|
|
|
|
emac = (at91_emac_t *) netdev->iobase;
|
|
|
|
adv = ADVERTISE_CSMA | ADVERTISE_ALL;
|
|
at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
|
|
MII_ADVERTISE, adv);
|
|
debug_cond(VERBOSEP, "%s: Starting autonegotiation...\n", netdev->name);
|
|
at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMCR,
|
|
(BMCR_ANENABLE | BMCR_ANRESTART));
|
|
|
|
for (i = 0; i < 30000; i++) {
|
|
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
|
|
MII_BMSR, &status);
|
|
if (status & BMSR_ANEGCOMPLETE)
|
|
break;
|
|
udelay(100);
|
|
}
|
|
|
|
if (status & BMSR_ANEGCOMPLETE) {
|
|
debug_cond(VERBOSEP,
|
|
"%s: Autonegotiation complete\n", netdev->name);
|
|
} else {
|
|
printf("%s: Autonegotiation timed out (status=0x%04x)\n",
|
|
netdev->name, status);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int at91emac_phy_init(struct eth_device *netdev)
|
|
{
|
|
u16 phy_id, status, adv, lpa;
|
|
int media, speed, duplex;
|
|
int i;
|
|
at91_emac_t *emac;
|
|
|
|
emac = (at91_emac_t *) netdev->iobase;
|
|
|
|
/* Check if the PHY is up to snuff... */
|
|
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
|
|
MII_PHYSID1, &phy_id);
|
|
if (phy_id == 0xffff) {
|
|
printf("%s: No PHY present\n", netdev->name);
|
|
return -1;
|
|
}
|
|
|
|
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
|
|
MII_BMSR, &status);
|
|
|
|
if (!(status & BMSR_LSTATUS)) {
|
|
/* Try to re-negotiate if we don't have link already. */
|
|
if (at91emac_phy_reset(netdev))
|
|
return -2;
|
|
|
|
for (i = 0; i < 100000 / 100; i++) {
|
|
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
|
|
MII_BMSR, &status);
|
|
if (status & BMSR_LSTATUS)
|
|
break;
|
|
udelay(100);
|
|
}
|
|
}
|
|
if (!(status & BMSR_LSTATUS)) {
|
|
debug_cond(VERBOSEP, "%s: link down\n", netdev->name);
|
|
return -3;
|
|
} else {
|
|
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
|
|
MII_ADVERTISE, &adv);
|
|
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
|
|
MII_LPA, &lpa);
|
|
media = mii_nway_result(lpa & adv);
|
|
speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
|
|
? 1 : 0);
|
|
duplex = (media & ADVERTISE_FULL) ? 1 : 0;
|
|
debug_cond(VERBOSEP, "%s: link up, %sMbps %s-duplex\n",
|
|
netdev->name,
|
|
speed ? "100" : "10",
|
|
duplex ? "full" : "half");
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int at91emac_UpdateLinkSpeed(at91_emac_t *emac)
|
|
{
|
|
unsigned short stat1;
|
|
|
|
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMSR, &stat1);
|
|
|
|
if (!(stat1 & BMSR_LSTATUS)) /* link status up? */
|
|
return -1;
|
|
|
|
if (stat1 & BMSR_100FULL) {
|
|
/*set Emac for 100BaseTX and Full Duplex */
|
|
writel(readl(&emac->cfg) |
|
|
AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD,
|
|
&emac->cfg);
|
|
return 0;
|
|
}
|
|
|
|
if (stat1 & BMSR_10FULL) {
|
|
/*set MII for 10BaseT and Full Duplex */
|
|
writel((readl(&emac->cfg) &
|
|
~(AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD)
|
|
) | AT91_EMAC_CFG_FD,
|
|
&emac->cfg);
|
|
return 0;
|
|
}
|
|
|
|
if (stat1 & BMSR_100HALF) {
|
|
/*set MII for 100BaseTX and Half Duplex */
|
|
writel((readl(&emac->cfg) &
|
|
~(AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD)
|
|
) | AT91_EMAC_CFG_SPD,
|
|
&emac->cfg);
|
|
return 0;
|
|
}
|
|
|
|
if (stat1 & BMSR_10HALF) {
|
|
/*set MII for 10BaseT and Half Duplex */
|
|
writel((readl(&emac->cfg) &
|
|
~(AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD)),
|
|
&emac->cfg);
|
|
return 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int at91emac_init(struct eth_device *netdev, bd_t *bd)
|
|
{
|
|
int i;
|
|
u32 value;
|
|
emac_device *dev;
|
|
at91_emac_t *emac;
|
|
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
|
|
|
emac = (at91_emac_t *) netdev->iobase;
|
|
dev = (emac_device *) netdev->priv;
|
|
|
|
/* PIO Disable Register */
|
|
value = ATMEL_PMX_AA_EMDIO | ATMEL_PMX_AA_EMDC |
|
|
ATMEL_PMX_AA_ERXER | ATMEL_PMX_AA_ERX1 |
|
|
ATMEL_PMX_AA_ERX0 | ATMEL_PMX_AA_ECRS |
|
|
ATMEL_PMX_AA_ETX1 | ATMEL_PMX_AA_ETX0 |
|
|
ATMEL_PMX_AA_ETXEN | ATMEL_PMX_AA_EREFCK;
|
|
|
|
writel(value, &pio->pioa.pdr);
|
|
writel(value, &pio->pioa.mux.pio2.asr);
|
|
|
|
#ifdef CONFIG_RMII
|
|
value = ATMEL_PMX_BA_ERXCK;
|
|
#else
|
|
value = ATMEL_PMX_BA_ERXCK | ATMEL_PMX_BA_ECOL |
|
|
ATMEL_PMX_BA_ERXDV | ATMEL_PMX_BA_ERX3 |
|
|
ATMEL_PMX_BA_ERX2 | ATMEL_PMX_BA_ETXER |
|
|
ATMEL_PMX_BA_ETX3 | ATMEL_PMX_BA_ETX2;
|
|
#endif
|
|
writel(value, &pio->piob.pdr);
|
|
writel(value, &pio->piob.mux.pio2.bsr);
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_EMAC);
|
|
|
|
writel(readl(&emac->ctl) | AT91_EMAC_CTL_CSR, &emac->ctl);
|
|
|
|
/* Init Ethernet buffers */
|
|
for (i = 0; i < RBF_FRAMEMAX; i++) {
|
|
dev->rbfdt[i].addr = (unsigned long) net_rx_packets[i];
|
|
dev->rbfdt[i].size = 0;
|
|
}
|
|
dev->rbfdt[RBF_FRAMEMAX - 1].addr |= RBF_WRAP;
|
|
dev->rbindex = 0;
|
|
writel((u32) &(dev->rbfdt[0]), &emac->rbqp);
|
|
|
|
writel(readl(&emac->rsr) &
|
|
~(AT91_EMAC_RSR_OVR | AT91_EMAC_RSR_REC | AT91_EMAC_RSR_BNA),
|
|
&emac->rsr);
|
|
|
|
value = AT91_EMAC_CFG_CAF | AT91_EMAC_CFG_NBC |
|
|
HCLK_DIV;
|
|
#ifdef CONFIG_RMII
|
|
value |= AT91_EMAC_CFG_RMII;
|
|
#endif
|
|
writel(value, &emac->cfg);
|
|
|
|
writel(readl(&emac->ctl) | AT91_EMAC_CTL_TE | AT91_EMAC_CTL_RE,
|
|
&emac->ctl);
|
|
|
|
if (!at91emac_phy_init(netdev)) {
|
|
at91emac_UpdateLinkSpeed(emac);
|
|
return 0;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static void at91emac_halt(struct eth_device *netdev)
|
|
{
|
|
at91_emac_t *emac;
|
|
|
|
emac = (at91_emac_t *) netdev->iobase;
|
|
writel(readl(&emac->ctl) & ~(AT91_EMAC_CTL_TE | AT91_EMAC_CTL_RE),
|
|
&emac->ctl);
|
|
debug_cond(DEBUG_AT91EMAC, "halt MAC\n");
|
|
}
|
|
|
|
static int at91emac_send(struct eth_device *netdev, void *packet, int length)
|
|
{
|
|
at91_emac_t *emac;
|
|
|
|
emac = (at91_emac_t *) netdev->iobase;
|
|
|
|
while (!(readl(&emac->tsr) & AT91_EMAC_TSR_BNQ))
|
|
;
|
|
writel((u32) packet, &emac->tar);
|
|
writel(AT91_EMAC_TCR_LEN(length), &emac->tcr);
|
|
while (AT91_EMAC_TCR_LEN(readl(&emac->tcr)))
|
|
;
|
|
debug_cond(DEBUG_AT91EMAC, "Send %d\n", length);
|
|
writel(readl(&emac->tsr) | AT91_EMAC_TSR_COMP, &emac->tsr);
|
|
return 0;
|
|
}
|
|
|
|
static int at91emac_recv(struct eth_device *netdev)
|
|
{
|
|
emac_device *dev;
|
|
at91_emac_t *emac;
|
|
rbf_t *rbfp;
|
|
int size;
|
|
|
|
emac = (at91_emac_t *) netdev->iobase;
|
|
dev = (emac_device *) netdev->priv;
|
|
|
|
rbfp = &dev->rbfdt[dev->rbindex];
|
|
while (rbfp->addr & RBF_OWNER) {
|
|
size = rbfp->size & RBF_SIZE;
|
|
net_process_received_packet(net_rx_packets[dev->rbindex], size);
|
|
|
|
debug_cond(DEBUG_AT91EMAC, "Recv[%ld]: %d bytes @ %lx\n",
|
|
dev->rbindex, size, rbfp->addr);
|
|
|
|
rbfp->addr &= ~RBF_OWNER;
|
|
rbfp->size = 0;
|
|
if (dev->rbindex < (RBF_FRAMEMAX-1))
|
|
dev->rbindex++;
|
|
else
|
|
dev->rbindex = 0;
|
|
|
|
rbfp = &(dev->rbfdt[dev->rbindex]);
|
|
if (!(rbfp->addr & RBF_OWNER))
|
|
writel(readl(&emac->rsr) | AT91_EMAC_RSR_REC,
|
|
&emac->rsr);
|
|
}
|
|
|
|
if (readl(&emac->isr) & AT91_EMAC_IxR_RBNA) {
|
|
/* EMAC silicon bug 41.3.1 workaround 1 */
|
|
writel(readl(&emac->ctl) & ~AT91_EMAC_CTL_RE, &emac->ctl);
|
|
writel(readl(&emac->ctl) | AT91_EMAC_CTL_RE, &emac->ctl);
|
|
dev->rbindex = 0;
|
|
printf("%s: reset receiver (EMAC dead lock bug)\n",
|
|
netdev->name);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int at91emac_write_hwaddr(struct eth_device *netdev)
|
|
{
|
|
at91_emac_t *emac;
|
|
emac = (at91_emac_t *) netdev->iobase;
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_EMAC);
|
|
|
|
debug_cond(DEBUG_AT91EMAC,
|
|
"init MAC-ADDR %02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
netdev->enetaddr[5], netdev->enetaddr[4], netdev->enetaddr[3],
|
|
netdev->enetaddr[2], netdev->enetaddr[1], netdev->enetaddr[0]);
|
|
writel( (netdev->enetaddr[0] | netdev->enetaddr[1] << 8 |
|
|
netdev->enetaddr[2] << 16 | netdev->enetaddr[3] << 24),
|
|
&emac->sa2l);
|
|
writel((netdev->enetaddr[4] | netdev->enetaddr[5] << 8), &emac->sa2h);
|
|
debug_cond(DEBUG_AT91EMAC, "init MAC-ADDR %x%x\n",
|
|
readl(&emac->sa2h), readl(&emac->sa2l));
|
|
return 0;
|
|
}
|
|
|
|
int at91emac_register(bd_t *bis, unsigned long iobase)
|
|
{
|
|
emac_device *emac;
|
|
emac_device *emacfix;
|
|
struct eth_device *dev;
|
|
|
|
if (iobase == 0)
|
|
iobase = ATMEL_BASE_EMAC;
|
|
emac = malloc(sizeof(*emac)+512);
|
|
if (emac == NULL)
|
|
return -1;
|
|
dev = malloc(sizeof(*dev));
|
|
if (dev == NULL) {
|
|
free(emac);
|
|
return -1;
|
|
}
|
|
/* alignment as per Errata (64 bytes) is insufficient! */
|
|
emacfix = (emac_device *) (((unsigned long) emac + 0x1ff) & 0xFFFFFE00);
|
|
memset(emacfix, 0, sizeof(emac_device));
|
|
|
|
memset(dev, 0, sizeof(*dev));
|
|
strcpy(dev->name, "emac");
|
|
dev->iobase = iobase;
|
|
dev->priv = emacfix;
|
|
dev->init = at91emac_init;
|
|
dev->halt = at91emac_halt;
|
|
dev->send = at91emac_send;
|
|
dev->recv = at91emac_recv;
|
|
dev->write_hwaddr = at91emac_write_hwaddr;
|
|
|
|
eth_register(dev);
|
|
|
|
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
|
|
int retval;
|
|
struct mii_dev *mdiodev = mdio_alloc();
|
|
if (!mdiodev)
|
|
return -ENOMEM;
|
|
strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
|
|
mdiodev->read = at91emac_mii_read;
|
|
mdiodev->write = at91emac_mii_write;
|
|
|
|
retval = mdio_register(mdiodev);
|
|
if (retval < 0)
|
|
return retval;
|
|
#endif
|
|
return 1;
|
|
}
|