mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 03:08:31 +00:00
b0778d9c2c
This patch adds support for Realtek PHY RTL8201F 10/100Mbs (with variants: RTL8201FN and RTL8201FL) PHYceiver. It is present on Actions Semi Cubieboard7 board. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
429 lines
11 KiB
C
429 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* RealTek PHY drivers
|
|
*
|
|
* Copyright 2010-2011, 2015 Freescale Semiconductor, Inc.
|
|
* author Andy Fleming
|
|
* Copyright 2016 Karsten Merker <merker@debian.org>
|
|
*/
|
|
#include <common.h>
|
|
#include <linux/bitops.h>
|
|
#include <phy.h>
|
|
#include <linux/delay.h>
|
|
|
|
#define PHY_RTL8211x_FORCE_MASTER BIT(1)
|
|
#define PHY_RTL8211E_PINE64_GIGABIT_FIX BIT(2)
|
|
#define PHY_RTL8211F_FORCE_EEE_RXC_ON BIT(3)
|
|
|
|
#define PHY_AUTONEGOTIATE_TIMEOUT 5000
|
|
|
|
/* RTL8211x 1000BASE-T Control Register */
|
|
#define MIIM_RTL8211x_CTRL1000T_MSCE BIT(12);
|
|
#define MIIM_RTL8211x_CTRL1000T_MASTER BIT(11);
|
|
|
|
/* RTL8211x PHY Status Register */
|
|
#define MIIM_RTL8211x_PHY_STATUS 0x11
|
|
#define MIIM_RTL8211x_PHYSTAT_SPEED 0xc000
|
|
#define MIIM_RTL8211x_PHYSTAT_GBIT 0x8000
|
|
#define MIIM_RTL8211x_PHYSTAT_100 0x4000
|
|
#define MIIM_RTL8211x_PHYSTAT_DUPLEX 0x2000
|
|
#define MIIM_RTL8211x_PHYSTAT_SPDDONE 0x0800
|
|
#define MIIM_RTL8211x_PHYSTAT_LINK 0x0400
|
|
|
|
/* RTL8211x PHY Interrupt Enable Register */
|
|
#define MIIM_RTL8211x_PHY_INER 0x12
|
|
#define MIIM_RTL8211x_PHY_INTR_ENA 0x9f01
|
|
#define MIIM_RTL8211x_PHY_INTR_DIS 0x0000
|
|
|
|
/* RTL8211x PHY Interrupt Status Register */
|
|
#define MIIM_RTL8211x_PHY_INSR 0x13
|
|
|
|
/* RTL8211F PHY Status Register */
|
|
#define MIIM_RTL8211F_PHY_STATUS 0x1a
|
|
#define MIIM_RTL8211F_AUTONEG_ENABLE 0x1000
|
|
#define MIIM_RTL8211F_PHYSTAT_SPEED 0x0030
|
|
#define MIIM_RTL8211F_PHYSTAT_GBIT 0x0020
|
|
#define MIIM_RTL8211F_PHYSTAT_100 0x0010
|
|
#define MIIM_RTL8211F_PHYSTAT_DUPLEX 0x0008
|
|
#define MIIM_RTL8211F_PHYSTAT_SPDDONE 0x0800
|
|
#define MIIM_RTL8211F_PHYSTAT_LINK 0x0004
|
|
|
|
#define MIIM_RTL8211E_CONFREG 0x1c
|
|
#define MIIM_RTL8211E_CONFREG_TXD 0x0002
|
|
#define MIIM_RTL8211E_CONFREG_RXD 0x0004
|
|
#define MIIM_RTL8211E_CONFREG_MAGIC 0xb400 /* Undocumented */
|
|
|
|
#define MIIM_RTL8211E_EXT_PAGE_SELECT 0x1e
|
|
|
|
#define MIIM_RTL8211F_PAGE_SELECT 0x1f
|
|
#define MIIM_RTL8211F_TX_DELAY 0x100
|
|
#define MIIM_RTL8211F_RX_DELAY 0x8
|
|
#define MIIM_RTL8211F_LCR 0x10
|
|
|
|
static int rtl8211f_phy_extread(struct phy_device *phydev, int addr,
|
|
int devaddr, int regnum)
|
|
{
|
|
int oldpage = phy_read(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_RTL8211F_PAGE_SELECT);
|
|
int val;
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, devaddr);
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, regnum);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, oldpage);
|
|
|
|
return val;
|
|
}
|
|
|
|
static int rtl8211f_phy_extwrite(struct phy_device *phydev, int addr,
|
|
int devaddr, int regnum, u16 val)
|
|
{
|
|
int oldpage = phy_read(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_RTL8211F_PAGE_SELECT);
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, devaddr);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, regnum, val);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, oldpage);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8211b_probe(struct phy_device *phydev)
|
|
{
|
|
#ifdef CONFIG_RTL8211X_PHY_FORCE_MASTER
|
|
phydev->flags |= PHY_RTL8211x_FORCE_MASTER;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8211e_probe(struct phy_device *phydev)
|
|
{
|
|
#ifdef CONFIG_RTL8211E_PINE64_GIGABIT_FIX
|
|
phydev->flags |= PHY_RTL8211E_PINE64_GIGABIT_FIX;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8211f_probe(struct phy_device *phydev)
|
|
{
|
|
#ifdef CONFIG_RTL8211F_PHY_FORCE_EEE_RXC_ON
|
|
phydev->flags |= PHY_RTL8211F_FORCE_EEE_RXC_ON;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* RealTek RTL8211x */
|
|
static int rtl8211x_config(struct phy_device *phydev)
|
|
{
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
|
|
|
|
/* mask interrupt at init; if the interrupt is
|
|
* needed indeed, it should be explicitly enabled
|
|
*/
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_INER,
|
|
MIIM_RTL8211x_PHY_INTR_DIS);
|
|
|
|
if (phydev->flags & PHY_RTL8211x_FORCE_MASTER) {
|
|
unsigned int reg;
|
|
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000);
|
|
/* force manual master/slave configuration */
|
|
reg |= MIIM_RTL8211x_CTRL1000T_MSCE;
|
|
/* force master mode */
|
|
reg |= MIIM_RTL8211x_CTRL1000T_MASTER;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, reg);
|
|
}
|
|
if (phydev->flags & PHY_RTL8211E_PINE64_GIGABIT_FIX) {
|
|
unsigned int reg;
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT,
|
|
7);
|
|
phy_write(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_RTL8211E_EXT_PAGE_SELECT, 0xa4);
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211E_CONFREG);
|
|
/* Ensure both internal delays are turned off */
|
|
reg &= ~(MIIM_RTL8211E_CONFREG_TXD | MIIM_RTL8211E_CONFREG_RXD);
|
|
/* Flip the magic undocumented bits */
|
|
reg |= MIIM_RTL8211E_CONFREG_MAGIC;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211E_CONFREG, reg);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT,
|
|
0);
|
|
}
|
|
/* read interrupt status just to clear it */
|
|
phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_INER);
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* RealTek RTL8201F */
|
|
static int rtl8201f_config(struct phy_device *phydev)
|
|
{
|
|
genphy_config_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8211f_config(struct phy_device *phydev)
|
|
{
|
|
u16 reg;
|
|
|
|
if (phydev->flags & PHY_RTL8211F_FORCE_EEE_RXC_ON) {
|
|
unsigned int reg;
|
|
|
|
reg = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
|
|
reg &= ~MDIO_PCS_CTRL1_CLKSTOP_EN;
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, reg);
|
|
}
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_RTL8211F_PAGE_SELECT, 0xd08);
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE, 0x11);
|
|
|
|
/* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
|
|
reg |= MIIM_RTL8211F_TX_DELAY;
|
|
else
|
|
reg &= ~MIIM_RTL8211F_TX_DELAY;
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x11, reg);
|
|
|
|
/* enable RX-delay for rgmii-id and rgmii-rxid, otherwise disable it */
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE, 0x15);
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
|
|
reg |= MIIM_RTL8211F_RX_DELAY;
|
|
else
|
|
reg &= ~MIIM_RTL8211F_RX_DELAY;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x15, reg);
|
|
|
|
/* restore to default page 0 */
|
|
phy_write(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_RTL8211F_PAGE_SELECT, 0x0);
|
|
|
|
/* Set green LED for Link, yellow LED for Active */
|
|
phy_write(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_RTL8211F_PAGE_SELECT, 0xd04);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x10, 0x617f);
|
|
phy_write(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_RTL8211F_PAGE_SELECT, 0x0);
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8211x_parse_status(struct phy_device *phydev)
|
|
{
|
|
unsigned int speed;
|
|
unsigned int mii_reg;
|
|
|
|
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_STATUS);
|
|
|
|
if (!(mii_reg & MIIM_RTL8211x_PHYSTAT_SPDDONE)) {
|
|
int i = 0;
|
|
|
|
/* in case of timeout ->link is cleared */
|
|
phydev->link = 1;
|
|
puts("Waiting for PHY realtime link");
|
|
while (!(mii_reg & MIIM_RTL8211x_PHYSTAT_SPDDONE)) {
|
|
/* Timeout reached ? */
|
|
if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
|
|
puts(" TIMEOUT !\n");
|
|
phydev->link = 0;
|
|
break;
|
|
}
|
|
|
|
if ((i++ % 1000) == 0)
|
|
putc('.');
|
|
udelay(1000); /* 1 ms */
|
|
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_RTL8211x_PHY_STATUS);
|
|
}
|
|
puts(" done\n");
|
|
udelay(500000); /* another 500 ms (results in faster booting) */
|
|
} else {
|
|
if (mii_reg & MIIM_RTL8211x_PHYSTAT_LINK)
|
|
phydev->link = 1;
|
|
else
|
|
phydev->link = 0;
|
|
}
|
|
|
|
if (mii_reg & MIIM_RTL8211x_PHYSTAT_DUPLEX)
|
|
phydev->duplex = DUPLEX_FULL;
|
|
else
|
|
phydev->duplex = DUPLEX_HALF;
|
|
|
|
speed = (mii_reg & MIIM_RTL8211x_PHYSTAT_SPEED);
|
|
|
|
switch (speed) {
|
|
case MIIM_RTL8211x_PHYSTAT_GBIT:
|
|
phydev->speed = SPEED_1000;
|
|
break;
|
|
case MIIM_RTL8211x_PHYSTAT_100:
|
|
phydev->speed = SPEED_100;
|
|
break;
|
|
default:
|
|
phydev->speed = SPEED_10;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8211f_parse_status(struct phy_device *phydev)
|
|
{
|
|
unsigned int speed;
|
|
unsigned int mii_reg;
|
|
int i = 0;
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, 0xa43);
|
|
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PHY_STATUS);
|
|
|
|
phydev->link = 1;
|
|
while (!(mii_reg & MIIM_RTL8211F_PHYSTAT_LINK)) {
|
|
if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
|
|
puts(" TIMEOUT !\n");
|
|
phydev->link = 0;
|
|
break;
|
|
}
|
|
|
|
if ((i++ % 1000) == 0)
|
|
putc('.');
|
|
udelay(1000);
|
|
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_RTL8211F_PHY_STATUS);
|
|
}
|
|
|
|
if (mii_reg & MIIM_RTL8211F_PHYSTAT_DUPLEX)
|
|
phydev->duplex = DUPLEX_FULL;
|
|
else
|
|
phydev->duplex = DUPLEX_HALF;
|
|
|
|
speed = (mii_reg & MIIM_RTL8211F_PHYSTAT_SPEED);
|
|
|
|
switch (speed) {
|
|
case MIIM_RTL8211F_PHYSTAT_GBIT:
|
|
phydev->speed = SPEED_1000;
|
|
break;
|
|
case MIIM_RTL8211F_PHYSTAT_100:
|
|
phydev->speed = SPEED_100;
|
|
break;
|
|
default:
|
|
phydev->speed = SPEED_10;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8211x_startup(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Read the Status (2x to make sure link is right) */
|
|
ret = genphy_update_link(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return rtl8211x_parse_status(phydev);
|
|
}
|
|
|
|
static int rtl8211e_startup(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = genphy_update_link(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return genphy_parse_link(phydev);
|
|
}
|
|
|
|
static int rtl8211f_startup(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Read the Status (2x to make sure link is right) */
|
|
ret = genphy_update_link(phydev);
|
|
if (ret)
|
|
return ret;
|
|
/* Read the Status (2x to make sure link is right) */
|
|
|
|
return rtl8211f_parse_status(phydev);
|
|
}
|
|
|
|
/* Support for RTL8211B PHY */
|
|
static struct phy_driver RTL8211B_driver = {
|
|
.name = "RealTek RTL8211B",
|
|
.uid = 0x1cc912,
|
|
.mask = 0xffffff,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.probe = &rtl8211b_probe,
|
|
.config = &rtl8211x_config,
|
|
.startup = &rtl8211x_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
/* Support for RTL8211E-VB-CG, RTL8211E-VL-CG and RTL8211EG-VB-CG PHYs */
|
|
static struct phy_driver RTL8211E_driver = {
|
|
.name = "RealTek RTL8211E",
|
|
.uid = 0x1cc915,
|
|
.mask = 0xffffff,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.probe = &rtl8211e_probe,
|
|
.config = &rtl8211x_config,
|
|
.startup = &rtl8211e_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
/* Support for RTL8211DN PHY */
|
|
static struct phy_driver RTL8211DN_driver = {
|
|
.name = "RealTek RTL8211DN",
|
|
.uid = 0x1cc914,
|
|
.mask = 0xffffff,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &rtl8211x_config,
|
|
.startup = &rtl8211x_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
/* Support for RTL8211F PHY */
|
|
static struct phy_driver RTL8211F_driver = {
|
|
.name = "RealTek RTL8211F",
|
|
.uid = 0x1cc916,
|
|
.mask = 0xffffff,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.probe = &rtl8211f_probe,
|
|
.config = &rtl8211f_config,
|
|
.startup = &rtl8211f_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
.readext = &rtl8211f_phy_extread,
|
|
.writeext = &rtl8211f_phy_extwrite,
|
|
};
|
|
|
|
/* Support for RTL8201F PHY */
|
|
static struct phy_driver RTL8201F_driver = {
|
|
.name = "RealTek RTL8201F 10/100Mbps Ethernet",
|
|
.uid = 0x1cc816,
|
|
.mask = 0xffffff,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.config = &rtl8201f_config,
|
|
.startup = &rtl8211e_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
int phy_realtek_init(void)
|
|
{
|
|
phy_register(&RTL8211B_driver);
|
|
phy_register(&RTL8211E_driver);
|
|
phy_register(&RTL8211F_driver);
|
|
phy_register(&RTL8211DN_driver);
|
|
phy_register(&RTL8201F_driver);
|
|
|
|
return 0;
|
|
}
|