mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 10:30:32 +00:00
7a86760924
The doc has a misleading 'make menuconfig' when building the EFI application and payload. Clarify this and also update information on test with QEMU. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
244 lines
9.1 KiB
Text
244 lines
9.1 KiB
Text
#
|
|
# Copyright (C) 2015 Google, Inc
|
|
#
|
|
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
|
|
U-Boot on EFI
|
|
=============
|
|
This document provides information about U-Boot running on top of EFI, either
|
|
as an application or just as a means of getting U-Boot onto a new platform.
|
|
|
|
|
|
In God's Name, Why?
|
|
-------------------
|
|
This is useful in several situations:
|
|
|
|
- You have EFI running on a board but U-Boot does not natively support it
|
|
fully yet. You can boot into U-Boot from EFI and use that until U-Boot is
|
|
fully ported
|
|
|
|
- You need to use an EFI implementation (e.g. UEFI) because your vendor
|
|
requires it in order to provide support
|
|
|
|
- You plan to use coreboot to boot into U-Boot but coreboot support does
|
|
not currently exist for your platform. In the meantime you can use U-Boot
|
|
on EFI and then move to U-Boot on coreboot when ready
|
|
|
|
- You use EFI but want to experiment with a simpler alternative like U-Boot
|
|
|
|
|
|
Status
|
|
------
|
|
Only x86 is supported at present. If you are using EFI on another architecture
|
|
you may want to reconsider. However, much of the code is generic so could be
|
|
ported.
|
|
|
|
U-Boot supports running as an EFI application for 32-bit EFI only. This is
|
|
not very useful since only a serial port is provided. You can look around at
|
|
memory and type 'help' but that is about it.
|
|
|
|
More usefully, U-Boot supports building itself as a payload for either 32-bit
|
|
or 64-bit EFI. U-Boot is packaged up and loaded in its entirety by EFI. Once
|
|
started, U-Boot changes to 32-bit mode (currently) and takes over the
|
|
machine. You can use devices, boot a kernel, etc.
|
|
|
|
|
|
Build Instructions
|
|
------------------
|
|
First choose a board that has EFI support and obtain an EFI implementation
|
|
for that board. It will be either 32-bit or 64-bit. Alternatively, you can
|
|
opt for using QEMU [1] and the OVMF [2], as detailed below.
|
|
|
|
To build U-Boot as an EFI application (32-bit EFI required), enable CONFIG_EFI
|
|
and CONFIG_EFI_APP. The efi-x86 config (efi-x86_defconfig) is set up for this.
|
|
Just build U-Boot as normal, e.g.
|
|
|
|
make efi-x86_defconfig
|
|
make
|
|
|
|
To build U-Boot as an EFI payload (32-bit or 64-bit EFI can be used), adjust an
|
|
existing config (like qemu-x86_defconfig) to enable CONFIG_EFI, CONFIG_EFI_STUB
|
|
and either CONFIG_EFI_STUB_32BIT or CONFIG_EFI_STUB_64BIT. All of these are
|
|
boolean Kconfig options. Then build U-Boot as normal, e.g.
|
|
|
|
make qemu-x86_defconfig
|
|
make
|
|
|
|
You will end up with one of these files depending on what you build for:
|
|
|
|
u-boot-app.efi - U-Boot EFI application
|
|
u-boot-payload.efi - U-Boot EFI payload application
|
|
|
|
|
|
Trying it out
|
|
-------------
|
|
QEMU is an emulator and it can emulate an x86 machine. Please make sure your
|
|
QEMU version is 2.3.0 or above to test this. You can run the payload with
|
|
something like this:
|
|
|
|
mkdir /tmp/efi
|
|
cp /path/to/u-boot*.efi /tmp/efi
|
|
qemu-system-x86_64 -bios bios.bin -hda fat:/tmp/efi/
|
|
|
|
Add -nographic if you want to use the terminal for output. Once it starts
|
|
type 'fs0:u-boot-payload.efi' to run the payload or 'fs0:u-boot-app.efi' to
|
|
run the application. 'bios.bin' is the EFI 'BIOS'. Check [2] to obtain a
|
|
prebuilt EFI BIOS for QEMU or you can build one from source as well.
|
|
|
|
To try it on real hardware, put u-boot-app.efi on a suitable boot medium,
|
|
such as a USB stick. Then you can type something like this to start it:
|
|
|
|
fs0:u-boot-payload.efi
|
|
|
|
(or fs0:u-boot-app.efi for the application)
|
|
|
|
This will start the payload, copy U-Boot into RAM and start U-Boot. Note
|
|
that EFI does not support booting a 64-bit application from a 32-bit
|
|
EFI (or vice versa). Also it will often fail to print an error message if
|
|
you get this wrong.
|
|
|
|
|
|
Inner workings
|
|
==============
|
|
Here follow a few implementation notes for those who want to fiddle with
|
|
this and perhaps contribute patches.
|
|
|
|
The application and payload approaches sound similar but are in fact
|
|
implemented completely differently.
|
|
|
|
EFI Application
|
|
---------------
|
|
For the application the whole of U-Boot is built as a shared library. The
|
|
efi_main() function is in lib/efi/efi_app.c. It sets up some basic EFI
|
|
functions with efi_init(), sets up U-Boot global_data, allocates memory for
|
|
U-Boot's malloc(), etc. and enters the normal init sequence (board_init_f()
|
|
and board_init_r()).
|
|
|
|
Since U-Boot limits its memory access to the allocated regions very little
|
|
special code is needed. The CONFIG_EFI_APP option controls a few things
|
|
that need to change so 'git grep CONFIG_EFI_APP' may be instructive.
|
|
The CONFIG_EFI option controls more general EFI adjustments.
|
|
|
|
The only available driver is the serial driver. This calls back into EFI
|
|
'boot services' to send and receive characters. Although it is implemented
|
|
as a serial driver the console device is not necessarilly serial. If you
|
|
boot EFI with video output then the 'serial' device will operate on your
|
|
target devices's display instead and the device's USB keyboard will also
|
|
work if connected. If you have both serial and video output, then both
|
|
consoles will be active. Even though U-Boot does the same thing normally,
|
|
These are features of EFI, not U-Boot.
|
|
|
|
Very little code is involved in implementing the EFI application feature.
|
|
U-Boot is highly portable. Most of the difficulty is in modifying the
|
|
Makefile settings to pass the right build flags. In particular there is very
|
|
little x86-specific code involved - you can find most of it in
|
|
arch/x86/cpu. Porting to ARM (which can also use EFI if you are brave
|
|
enough) should be straightforward.
|
|
|
|
Use the 'reset' command to get back to EFI.
|
|
|
|
EFI Payload
|
|
-----------
|
|
The payload approach is a different kettle of fish. It works by building
|
|
U-Boot exactly as normal for your target board, then adding the entire
|
|
image (including device tree) into a small EFI stub application responsible
|
|
for booting it. The stub application is built as a normal EFI application
|
|
except that it has a lot of data attached to it.
|
|
|
|
The stub application is implemented in lib/efi/efi_stub.c. The efi_main()
|
|
function is called by EFI. It is responsible for copying U-Boot from its
|
|
original location into memory, disabling EFI boot services and starting
|
|
U-Boot. U-Boot then starts as normal, relocates, starts all drivers, etc.
|
|
|
|
The stub application is architecture-dependent. At present it has some
|
|
x86-specific code and a comment at the top of efi_stub.c describes this.
|
|
|
|
While the stub application does allocate some memory from EFI this is not
|
|
used by U-Boot (the payload). In fact when U-Boot starts it has all of the
|
|
memory available to it and can operate as it pleases (but see the next
|
|
section).
|
|
|
|
Tables
|
|
------
|
|
The payload can pass information to U-Boot in the form of EFI tables. At
|
|
present this feature is used to pass the EFI memory map, an inordinately
|
|
large list of memory regions. You can use the 'efi mem all' command to
|
|
display this list. U-Boot uses the list to work out where to relocate
|
|
itself.
|
|
|
|
Although U-Boot can use any memory it likes, EFI marks some memory as used
|
|
by 'run-time services', code that hangs around while U-Boot is running and
|
|
is even present when Linux is running. This is common on x86 and provides
|
|
a way for Linux to call back into the firmware to control things like CPU
|
|
fan speed. U-Boot uses only 'conventional' memory, in EFI terminology. It
|
|
will relocate itself to the top of the largest block of memory it can find
|
|
below 4GB.
|
|
|
|
Interrupts
|
|
----------
|
|
U-Boot drivers typically don't use interrupts. Since EFI enables interrupts
|
|
it is possible that an interrupt will fire that U-Boot cannot handle. This
|
|
seems to cause problems. For this reason the U-Boot payload runs with
|
|
interrupts disabled at present.
|
|
|
|
32/64-bit
|
|
---------
|
|
While the EFI application can in principle be built as either 32- or 64-bit,
|
|
only 32-bit is currently supported. This means that the application can only
|
|
be used with 32-bit EFI.
|
|
|
|
The payload stub can be build as either 32- or 64-bits. Only a small amount
|
|
of code is built this way (see the extra- line in lib/efi/Makefile).
|
|
Everything else is built as a normal U-Boot, so is always 32-bit on x86 at
|
|
present.
|
|
|
|
Future work
|
|
-----------
|
|
This work could be extended in a number of ways:
|
|
|
|
- Add a generic x86 EFI payload configuration. At present you need to modify
|
|
an existing one, but mostly the low-level x86 code is disabled when booting
|
|
on EFI anyway, so a generic 'EFI' board could be created with a suitable set
|
|
of drivers enabled.
|
|
|
|
- Add ARM support
|
|
|
|
- Add 64-bit application support
|
|
|
|
- Figure out how to solve the interrupt problem
|
|
|
|
- Add more drivers to the application side (e.g. video, block devices, USB,
|
|
environment access). This would mostly be an academic exercise as a strong
|
|
use case is not readily apparent, but it might be fun.
|
|
|
|
- Avoid turning off boot services in the stub. Instead allow U-Boot to make
|
|
use of boot services in case it wants to. It is unclear what it might want
|
|
though.
|
|
|
|
Where is the code?
|
|
------------------
|
|
lib/efi
|
|
payload stub, application, support code. Mostly arch-neutral
|
|
|
|
arch/x86/lib/efi
|
|
helper functions for the fake DRAM init, etc. These can be used by
|
|
any board that runs as a payload.
|
|
|
|
arch/x86/cpu/efi
|
|
x86 support code for running as an EFI application
|
|
|
|
board/efi/efi-x86/efi.c
|
|
x86 board code for running as an EFI application
|
|
|
|
common/cmd_efi.c
|
|
the 'efi' command
|
|
|
|
|
|
--
|
|
Ben Stoltz, Simon Glass
|
|
Google, Inc
|
|
July 2015
|
|
|
|
[1] http://www.qemu.org
|
|
[2] http://www.tianocore.org/ovmf/
|