u-boot/board/ti/omap5_uevm/evm.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

280 lines
6.1 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2010
* Texas Instruments Incorporated, <www.ti.com>
* Aneesh V <aneesh@ti.com>
* Steve Sakoman <steve@sakoman.com>
*/
#include <common.h>
#include <palmas.h>
#include <asm/arch/omap.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
#include <tca642x.h>
#include <usb.h>
#include <linux/usb/gadget.h>
#include <dwc3-uboot.h>
#include <dwc3-omap-uboot.h>
#include <ti-usb-phy-uboot.h>
#include "mux_data.h"
#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_XHCI_OMAP)
#include <sata.h>
#include <usb.h>
#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/arch/clock.h>
#include <asm/arch/ehci.h>
#include <asm/ehci-omap.h>
#include <asm/arch/sata.h>
#define DIE_ID_REG_BASE (OMAP54XX_L4_CORE_BASE + 0x2000)
#define DIE_ID_REG_OFFSET 0x200
#endif
DECLARE_GLOBAL_DATA_PTR;
const struct omap_sysinfo sysinfo = {
"Board: OMAP5432 uEVM\n"
};
/**
* @brief tca642x_init - uEVM default values for the GPIO expander
* input reg, output reg, polarity reg, configuration reg
*/
struct tca642x_bank_info tca642x_init[] = {
{ .input_reg = 0x00,
.output_reg = 0x04,
.polarity_reg = 0x00,
.configuration_reg = 0x80 },
{ .input_reg = 0x00,
.output_reg = 0x00,
.polarity_reg = 0x00,
.configuration_reg = 0xff },
{ .input_reg = 0x00,
.output_reg = 0x00,
.polarity_reg = 0x00,
.configuration_reg = 0x40 },
};
#ifdef CONFIG_USB_DWC3
static struct dwc3_device usb_otg_ss = {
.maximum_speed = USB_SPEED_SUPER,
.base = OMAP5XX_USB_OTG_SS_BASE,
.tx_fifo_resize = false,
.index = 0,
};
static struct dwc3_omap_device usb_otg_ss_glue = {
.base = (void *)OMAP5XX_USB_OTG_SS_GLUE_BASE,
.utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
.index = 0,
};
static struct ti_usb_phy_device usb_phy_device = {
.pll_ctrl_base = (void *)OMAP5XX_USB3_PHY_PLL_CTRL,
.usb2_phy_power = (void *)OMAP5XX_USB2_PHY_POWER,
.usb3_phy_power = (void *)OMAP5XX_USB3_PHY_POWER,
.index = 0,
};
int board_usb_init(int index, enum usb_init_type init)
{
if (index) {
printf("Invalid Controller Index\n");
return -EINVAL;
}
if (init == USB_INIT_DEVICE) {
usb_otg_ss.dr_mode = USB_DR_MODE_PERIPHERAL;
usb_otg_ss_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
} else {
usb_otg_ss.dr_mode = USB_DR_MODE_HOST;
usb_otg_ss_glue.vbus_id_status = OMAP_DWC3_ID_GROUND;
}
enable_usb_clocks(index);
ti_usb_phy_uboot_init(&usb_phy_device);
dwc3_omap_uboot_init(&usb_otg_ss_glue);
dwc3_uboot_init(&usb_otg_ss);
return 0;
}
int board_usb_cleanup(int index, enum usb_init_type init)
{
if (index) {
printf("Invalid Controller Index\n");
return -EINVAL;
}
ti_usb_phy_uboot_exit(index);
dwc3_uboot_exit(index);
dwc3_omap_uboot_exit(index);
disable_usb_clocks(index);
return 0;
}
int usb_gadget_handle_interrupts(int index)
{
u32 status;
status = dwc3_omap_uboot_interrupt_status(index);
if (status)
dwc3_uboot_handle_interrupt(index);
return 0;
}
#endif
/**
* @brief board_init
*
* @return 0
*/
int board_init(void)
{
gpmc_init();
gd->bd->bi_arch_number = MACH_TYPE_OMAP5_SEVM;
gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
tca642x_set_inital_state(CONFIG_SYS_I2C_TCA642X_ADDR, tca642x_init);
return 0;
}
int board_eth_init(bd_t *bis)
{
return 0;
}
#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_XHCI_OMAP)
static void enable_host_clocks(void)
{
int auxclk;
int hs_clk_ctrl_val = (OPTFCLKEN_HSIC60M_P3_CLK |
OPTFCLKEN_HSIC480M_P3_CLK |
OPTFCLKEN_HSIC60M_P2_CLK |
OPTFCLKEN_HSIC480M_P2_CLK |
OPTFCLKEN_UTMI_P3_CLK | OPTFCLKEN_UTMI_P2_CLK);
/* Enable port 2 and 3 clocks*/
setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, hs_clk_ctrl_val);
/* Enable port 2 and 3 usb host ports tll clocks*/
setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl,
(OPTFCLKEN_USB_CH1_CLK_ENABLE | OPTFCLKEN_USB_CH2_CLK_ENABLE));
#ifdef CONFIG_USB_XHCI_OMAP
/* Enable the USB OTG Super speed clocks */
setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl,
(OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW));
#endif
auxclk = readl((*prcm)->scrm_auxclk1);
/* Request auxilary clock */
auxclk |= AUXCLK_ENABLE_MASK;
writel(auxclk, (*prcm)->scrm_auxclk1);
}
#endif
/**
* @brief misc_init_r - Configure EVM board specific configurations
* such as power configurations, ethernet initialization as phase2 of
* boot sequence
*
* @return 0
*/
int misc_init_r(void)
{
#ifdef CONFIG_PALMAS_POWER
palmas_init_settings();
#endif
omap_die_id_usbethaddr();
return 0;
}
void set_muxconf_regs(void)
{
do_set_mux((*ctrl)->control_padconf_core_base,
core_padconf_array_essential,
sizeof(core_padconf_array_essential) /
sizeof(struct pad_conf_entry));
do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_essential,
sizeof(wkup_padconf_array_essential) /
sizeof(struct pad_conf_entry));
}
#if defined(CONFIG_MMC)
int board_mmc_init(bd_t *bis)
{
omap_mmc_init(0, 0, 0, -1, -1);
omap_mmc_init(1, 0, 0, -1, -1);
return 0;
}
#endif
#ifdef CONFIG_USB_EHCI_HCD
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
.port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
};
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
int ret;
enable_host_clocks();
ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
if (ret < 0) {
puts("Failed to initialize ehci\n");
return ret;
}
return 0;
}
int ehci_hcd_stop(void)
{
return omap_ehci_hcd_stop();
}
void usb_hub_reset_devices(struct usb_hub_device *hub, int port)
{
/* The LAN9730 needs to be reset after the port power has been set. */
if (port == 3) {
gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 0);
udelay(10);
gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 1);
}
}
#endif
#ifdef CONFIG_USB_XHCI_OMAP
/**
* @brief board_usb_init - Configure EVM board specific configurations
* for the LDO's and clocks for the USB blocks.
*
* @return 0
*/
int board_usb_init(int index, enum usb_init_type init)
{
int ret;
#ifdef CONFIG_PALMAS_USB_SS_PWR
ret = palmas_enable_ss_ldo();
#endif
enable_host_clocks();
return 0;
}
#endif