u-boot/board/ivm/ivm.c
wdenk 2535d60277 * Patch by Martin Krause, 17 Jul 2003:
add delay to get I2C working with "imm" command and s3c24x0_i2c.c

* Patch by Richard Woodruff, 17 July 03:
  - Fixed bug in OMAP1510 baud rate divisor settings.

* Patch by Nye Liu, 16 July 2003:
  MPC860FADS fixes:
  - add MPC86xADS support (uses MPC86xADS.h)
  - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
    o PLPRCR changes
    o BRG changes (EXTAL/XTAL restricted to 10MHz)
    o don't trust gclk() software measurement by default, depend on
      CONFIG_8xx_GCLK_FREQ
  - add DRAM SIMM not installed detection
  - use more "correct" SDRAM initialization sequence
  - allow different SDRAM sizes (8xxADS has 8M)
  - default DER is 0
  - remove unused MAMR defines from FADS860T.h (all done in fads.c)
  - rename MAMR/MBMR defines to be more consistent. Should eventually
    be merged into MxMR to better reflect the PowerQUICC datasheet.

* Patch by Yuli Barcohen, 16 Jul 2003:
  support new Motorola PQ2FADS-ZU evaluation board which replaced
  MPC8260ADS and MPC8266ADS
2003-07-17 23:16:40 +00:00

382 lines
10 KiB
C

/*
* (C) Copyright 2000, 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* Ulrich Lutz, Speech Design GmbH, ulutz@datalab.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc8xx.h>
#include <commproc.h>
#ifdef CONFIG_STATUS_LED
# include <status_led.h>
#endif
/* ------------------------------------------------------------------------- */
static long int dram_size (long int, long int *, long int);
/* ------------------------------------------------------------------------- */
#define _NOT_USED_ 0xFFFFFFFF
/*
* 50 MHz SHARC access using UPM A
*/
const uint sharc_table[] =
{
/*
* Single Read. (Offset 0 in UPM RAM)
*/
0x0FF3FC04, 0x0FF3EC00, 0x7FFFEC04, 0xFFFFEC04,
0xFFFFEC05, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Read. (Offset 8 in UPM RAM)
*/
/* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Single Write. (Offset 18 in UPM RAM)
*/
0x0FAFFC04, 0x0FAFEC00, 0x7FFFEC04, 0xFFFFEC04,
0xFFFFEC05, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Write. (Offset 20 in UPM RAM)
*/
/* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Refresh (Offset 30 in UPM RAM)
*/
/* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Exception. (Offset 3c in UPM RAM)
*/
0x7FFFFC07, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
};
/*
* 50 MHz SDRAM access using UPM B
*/
const uint sdram_table[] =
{
/*
* Single Read. (Offset 0 in UPM RAM)
*/
0x0E26FC04, 0x11ADFC04, 0xEFBBBC00, 0x1FF77C45, /* last */
_NOT_USED_,
/*
* SDRAM Initialization (offset 5 in UPM RAM)
*
* This is no UPM entry point. The following definition uses
* the remaining space to establish an initialization
* sequence, which is executed by a RUN command.
*
*/
0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */
/*
* Burst Read. (Offset 8 in UPM RAM)
*/
0x0E26FC04, 0x10ADFC04, 0xF0AFFC00, 0xF0AFFC00,
0xF1AFFC00, 0xEFBBBC00, 0x1FF77C45, /* last */
_NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Single Write. (Offset 18 in UPM RAM)
*/
0x1F27FC04, 0xEEAEBC04, 0x01B93C00, 0x1FF77C45, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Write. (Offset 20 in UPM RAM)
*/
0x0E26BC00, 0x10AD7C00, 0xF0AFFC00, 0xF0AFFC00,
0xE1BBBC04, 0x1FF77C45, /* last */
_NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Refresh (Offset 30 in UPM RAM)
*/
0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC84,
0xFFFFFC05, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Exception. (Offset 3c in UPM RAM)
*/
0x7FFFFC07, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
};
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*
*/
int checkboard (void)
{
#ifdef CONFIG_IVMS8
puts ("Board: IVMS8\n");
#endif
#ifdef CONFIG_IVML24
puts ("Board: IVM-L8/24\n");
#endif
return (0);
}
/* ------------------------------------------------------------------------- */
long int
initdram (int board_type)
{
volatile immap_t *immr = (immap_t *)CFG_IMMR;
volatile memctl8xx_t *memctl = &immr->im_memctl;
long int size_b0;
/* enable SDRAM clock ("switch on" SDRAM) */
immr->im_cpm.cp_pbpar &= ~(CFG_PB_SDRAM_CLKE); /* GPIO */
immr->im_cpm.cp_pbodr &= ~(CFG_PB_SDRAM_CLKE); /* active output */
immr->im_cpm.cp_pbdir |= CFG_PB_SDRAM_CLKE ; /* output */
immr->im_cpm.cp_pbdat |= CFG_PB_SDRAM_CLKE ; /* assert SDRAM CLKE */
udelay(1);
/*
* Map controller bank 1 for ELIC SACCO
*/
memctl->memc_or1 = CFG_OR1;
memctl->memc_br1 = CFG_BR1;
/*
* Map controller bank 2 for ELIC EPIC
*/
memctl->memc_or2 = CFG_OR2;
memctl->memc_br2 = CFG_BR2;
/*
* Configure UPMA for SHARC
*/
upmconfig(UPMA, (uint *)sharc_table, sizeof(sharc_table)/sizeof(uint));
#if defined(CONFIG_IVML24)
/*
* Map controller bank 4 for HDLC Address space
*/
memctl->memc_or4 = CFG_OR4;
memctl->memc_br4 = CFG_BR4;
#endif
/*
* Map controller bank 5 for SHARC
*/
memctl->memc_or5 = CFG_OR5;
memctl->memc_br5 = CFG_BR5;
memctl->memc_mamr = 0x00001000;
/*
* Configure UPMB for SDRAM
*/
upmconfig(UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
memctl->memc_mptpr = CFG_MPTPR_1BK_8K;
memctl->memc_mar = 0x00000088;
/*
* Map controller bank 3 to the SDRAM bank at preliminary address.
*/
memctl->memc_or3 = CFG_OR3_PRELIM;
memctl->memc_br3 = CFG_BR3_PRELIM;
memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */
udelay(200);
memctl->memc_mcr = 0x80806105; /* precharge */
udelay(1);
memctl->memc_mcr = 0x80806106; /* load mode register */
udelay(1);
memctl->memc_mcr = 0x80806130; /* autorefresh */
udelay(1);
memctl->memc_mcr = 0x80806130; /* autorefresh */
udelay(1);
memctl->memc_mcr = 0x80806130; /* autorefresh */
udelay(1);
memctl->memc_mcr = 0x80806130; /* autorefresh */
udelay(1);
memctl->memc_mcr = 0x80806130; /* autorefresh */
udelay(1);
memctl->memc_mcr = 0x80806130; /* autorefresh */
udelay(1);
memctl->memc_mcr = 0x80806130; /* autorefresh */
udelay(1);
memctl->memc_mcr = 0x80806130; /* autorefresh */
memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */
/*
* Check Bank 0 Memory Size for re-configuration
*/
size_b0 = dram_size (CFG_MBMR_8COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;
return (size_b0);
}
/* ------------------------------------------------------------------------- */
/*
* Check memory range for valid RAM. A simple memory test determines
* the actually available RAM size between addresses `base' and
* `base + maxsize'. Some (not all) hardware errors are detected:
* - short between address lines
* - short between data lines
*/
static long int dram_size (long int mamr_value, long int *base, long int maxsize)
{
volatile immap_t *immr = (immap_t *)CFG_IMMR;
volatile memctl8xx_t *memctl = &immr->im_memctl;
volatile long int *addr;
ulong cnt, val;
ulong save[32]; /* to make test non-destructive */
unsigned char i = 0;
memctl->memc_mbmr = mamr_value;
for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) {
addr = base + cnt; /* pointer arith! */
save[i++] = *addr;
*addr = ~cnt;
}
/* write 0 to base address */
addr = base;
save[i] = *addr;
*addr = 0;
/* check at base address */
if ((val = *addr) != 0) {
*addr = save[i];
return (0);
}
for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) {
addr = base + cnt; /* pointer arith! */
val = *addr;
*addr = save[--i];
if (val != (~cnt)) {
return (cnt * sizeof(long));
}
}
return (maxsize);
}
/* ------------------------------------------------------------------------- */
void reset_phy(void)
{
immap_t *immr = (immap_t *)CFG_IMMR;
/* De-assert Ethernet Powerdown */
immr->im_cpm.cp_pbpar &= ~(CFG_PB_ETH_POWERDOWN); /* GPIO */
immr->im_cpm.cp_pbodr &= ~(CFG_PB_ETH_POWERDOWN); /* active output */
immr->im_cpm.cp_pbdir |= CFG_PB_ETH_POWERDOWN ; /* output */
immr->im_cpm.cp_pbdat &= ~(CFG_PB_ETH_POWERDOWN); /* Enable PHY power */
udelay(1000);
/*
* RESET is implemented by a positive pulse of at least 1 us
* at the reset pin.
*
* Configure RESET pins for NS DP83843 PHY, and RESET chip.
*
* Note: The RESET pin is high active, but there is an
* inverter on the SPD823TS board...
*/
immr->im_ioport.iop_pcpar &= ~(CFG_PC_ETH_RESET);
immr->im_ioport.iop_pcdir |= CFG_PC_ETH_RESET;
/* assert RESET signal of PHY */
immr->im_ioport.iop_pcdat &= ~(CFG_PC_ETH_RESET);
udelay (10);
/* de-assert RESET signal of PHY */
immr->im_ioport.iop_pcdat |= CFG_PC_ETH_RESET;
udelay (10);
}
/* ------------------------------------------------------------------------- */
void show_boot_progress (int status)
{
#if defined(CONFIG_STATUS_LED)
# if defined(STATUS_LED_YELLOW)
status_led_set (STATUS_LED_YELLOW,
(status < 0) ? STATUS_LED_ON : STATUS_LED_OFF);
# endif /* STATUS_LED_YELLOW */
# if defined(STATUS_LED_BOOT)
if (status == 6)
status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
# endif /* STATUS_LED_BOOT */
#endif /* CONFIG_STATUS_LED */
}
/* ------------------------------------------------------------------------- */
void ide_set_reset(int on)
{
volatile immap_t *immr = (immap_t *)CFG_IMMR;
/*
* Configure PC for IDE Reset Pin
*/
if (on) { /* assert RESET */
immr->im_ioport.iop_pcdat &= ~(CFG_PC_IDE_RESET);
} else { /* release RESET */
immr->im_ioport.iop_pcdat |= CFG_PC_IDE_RESET;
}
/* program port pin as GPIO output */
immr->im_ioport.iop_pcpar &= ~(CFG_PC_IDE_RESET);
immr->im_ioport.iop_pcso &= ~(CFG_PC_IDE_RESET);
immr->im_ioport.iop_pcdir |= CFG_PC_IDE_RESET;
}
/* ------------------------------------------------------------------------- */