mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 12:33:41 +00:00
95d3e1d090
1. add the address mapping related properties; 2. make "ref" clock optional, and add optional clock "da_ref"; 3. add the banks layout of TPHY V1 and V2; Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
144 lines
4.3 KiB
Text
144 lines
4.3 KiB
Text
MediaTek T-PHY binding
|
|
--------------------------
|
|
|
|
T-phy controller supports physical layer functionality for a number of
|
|
controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA.
|
|
|
|
Required properties (controller (parent) node):
|
|
- compatible : should be one of
|
|
"mediatek,generic-tphy-v1"
|
|
"mediatek,generic-tphy-v2"
|
|
|
|
- #address-cells: the number of cells used to represent physical
|
|
base addresses.
|
|
- #size-cells: the number of cells used to represent the size of an address.
|
|
- ranges: the address mapping relationship to the parent, defined with
|
|
- empty value: if optional 'reg' is used.
|
|
- non-empty value: if optional 'reg' is not used. should set
|
|
the child's base address to 0, the physical address
|
|
within parent's address space, and the length of
|
|
the address map.
|
|
|
|
Required nodes : a sub-node is required for each port the controller
|
|
provides. Address range information including the usual
|
|
'reg' property is used inside these nodes to describe
|
|
the controller's topology.
|
|
|
|
Optional properties (controller (parent) node):
|
|
- reg : offset and length of register shared by multiple ports,
|
|
exclude port's private register.
|
|
- mediatek,src-ref-clk-mhz : frequency of reference clock for slew rate
|
|
calibrate
|
|
- mediatek,src-coef : coefficient for slew rate calibrate, depends on
|
|
SoC process
|
|
|
|
Required properties (port (child) node):
|
|
- reg : address and length of the register set for the port.
|
|
- #phy-cells : should be 1 (See second example)
|
|
cell after port phandle is phy type from:
|
|
- PHY_TYPE_USB2
|
|
- PHY_TYPE_USB3
|
|
- PHY_TYPE_PCIE
|
|
- PHY_TYPE_SATA
|
|
|
|
Optional properties (port (child) node):
|
|
- clocks : a list of phandle + clock-specifier pairs, one for each
|
|
entry in clock-names
|
|
- clock-names : may contain
|
|
"ref": 48M reference clock for HighSpeed (digital) phy; and 26M
|
|
reference clock for SuperSpeed (digital) phy, sometimes is
|
|
24M, 25M or 27M, depended on platform.
|
|
"da_ref": the reference clock of analog phy, used if the clocks
|
|
of analog and digital phys are separated, otherwise uses
|
|
"ref" clock only if needed.
|
|
|
|
Example:
|
|
|
|
u3phy2: usb-phy@1a244000 {
|
|
compatible = "mediatek,generic-tphy-v1";
|
|
reg = <0x1a244000 0x0700>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
status = "disabled";
|
|
|
|
u2port1: usb-phy@1a244800 {
|
|
reg = <0x1a244800 0x0100>;
|
|
clocks = <&topckgen CLK_TOP_USB_PHY48M>;
|
|
clock-names = "ref";
|
|
#phy-cells = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
u3port1: usb-phy@1a244900 {
|
|
reg = <0x1a244900 0x0700>;
|
|
clocks = <&clk26m>;
|
|
clock-names = "ref";
|
|
#phy-cells = <1>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
Specifying phy control of devices
|
|
---------------------------------
|
|
|
|
Device nodes should specify the configuration required in their "phys"
|
|
property, containing a phandle to the phy port node and a device type;
|
|
phy-names for each port are optional.
|
|
|
|
Example:
|
|
|
|
#include <dt-bindings/phy/phy.h>
|
|
|
|
usb30: usb@11270000 {
|
|
...
|
|
phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
|
|
phy-names = "usb2-0", "usb3-0";
|
|
...
|
|
};
|
|
|
|
Layout differences of banks between TPHY V1 and V2
|
|
-------------------------------------------------------------
|
|
IP V1:
|
|
port offset bank
|
|
shared 0x0000 SPLLC
|
|
0x0100 FMREG
|
|
u2 port0 0x0800 U2PHY_COM
|
|
u3 port0 0x0900 U3PHYD
|
|
0x0a00 U3PHYD_BANK2
|
|
0x0b00 U3PHYA
|
|
0x0c00 U3PHYA_DA
|
|
u2 port1 0x1000 U2PHY_COM
|
|
u3 port1 0x1100 U3PHYD
|
|
0x1200 U3PHYD_BANK2
|
|
0x1300 U3PHYA
|
|
0x1400 U3PHYA_DA
|
|
u2 port2 0x1800 U2PHY_COM
|
|
...
|
|
|
|
IP V2:
|
|
port offset bank
|
|
u2 port0 0x0000 MISC
|
|
0x0100 FMREG
|
|
0x0300 U2PHY_COM
|
|
u3 port0 0x0700 SPLLC
|
|
0x0800 CHIP
|
|
0x0900 U3PHYD
|
|
0x0a00 U3PHYD_BANK2
|
|
0x0b00 U3PHYA
|
|
0x0c00 U3PHYA_DA
|
|
u2 port1 0x1000 MISC
|
|
0x1100 FMREG
|
|
0x1300 U2PHY_COM
|
|
u3 port1 0x1700 SPLLC
|
|
0x1800 CHIP
|
|
0x1900 U3PHYD
|
|
0x1a00 U3PHYD_BANK2
|
|
0x1b00 U3PHYA
|
|
0x1c00 U3PHYA_DA
|
|
u2 port2 0x2000 MISC
|
|
...
|
|
|
|
SPLLC shared by u3 ports and FMREG shared by u2 ports on
|
|
TPHY V1 are put back into each port; a new bank MISC for
|
|
u2 ports and CHIP for u3 ports are added on TPHY V2.
|