u-boot/cpu/arm920t/s3c24x0/nand.c
Harald Welte 16158778b5 ARM: S3C24x0 SoC NAND controller support
This patch adds NAND support to the S3C24x0 SoC code in u-boot

Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-02-04 23:54:51 +01:00

179 lines
4.5 KiB
C

/*
* (C) Copyright 2006 OpenMoko, Inc.
* Author: Harald Welte <laforge@openmoko.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#if 0
#define DEBUGN printf
#else
#define DEBUGN(x, args ...) {}
#endif
#if defined(CONFIG_CMD_NAND)
#if !defined(CFG_NAND_LEGACY)
#include <nand.h>
#include <s3c2410.h>
#define __REGb(x) (*(volatile unsigned char *)(x))
#define __REGi(x) (*(volatile unsigned int *)(x))
#define NF_BASE 0x4e000000
#define NFCONF __REGi(NF_BASE + 0x0)
#define NFCMD __REGb(NF_BASE + 0x4)
#define NFADDR __REGb(NF_BASE + 0x8)
#define NFDATA __REGb(NF_BASE + 0xc)
#define NFSTAT __REGb(NF_BASE + 0x10)
#define NFECC0 __REGb(NF_BASE + 0x14)
#define NFECC1 __REGb(NF_BASE + 0x15)
#define NFECC2 __REGb(NF_BASE + 0x16)
#define S3C2410_NFCONF_EN (1<<15)
#define S3C2410_NFCONF_512BYTE (1<<14)
#define S3C2410_NFCONF_4STEP (1<<13)
#define S3C2410_NFCONF_INITECC (1<<12)
#define S3C2410_NFCONF_nFCE (1<<11)
#define S3C2410_NFCONF_TACLS(x) ((x)<<8)
#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4)
#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0)
static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd)
{
struct nand_chip *chip = mtd->priv;
DEBUGN("hwcontrol(): 0x%02x: ", cmd);
switch (cmd) {
case NAND_CTL_SETNCE:
NFCONF &= ~S3C2410_NFCONF_nFCE;
DEBUGN("NFCONF=0x%08x\n", NFCONF);
break;
case NAND_CTL_CLRNCE:
NFCONF |= S3C2410_NFCONF_nFCE;
DEBUGN("NFCONF=0x%08x\n", NFCONF);
break;
case NAND_CTL_SETALE:
chip->IO_ADDR_W = NF_BASE + 0x8;
DEBUGN("SETALE\n");
break;
case NAND_CTL_SETCLE:
chip->IO_ADDR_W = NF_BASE + 0x4;
DEBUGN("SETCLE\n");
break;
default:
chip->IO_ADDR_W = NF_BASE + 0xc;
break;
}
return;
}
static int s3c2410_dev_ready(struct mtd_info *mtd)
{
DEBUGN("dev_ready\n");
return (NFSTAT & 0x01);
}
#ifdef CONFIG_S3C2410_NAND_HWECC
void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
{
DEBUGN("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd ,mode);
NFCONF |= S3C2410_NFCONF_INITECC;
}
static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
u_char *ecc_code)
{
ecc_code[0] = NFECC0;
ecc_code[1] = NFECC1;
ecc_code[2] = NFECC2;
DEBUGN("s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
return 0;
}
static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc)
{
if (read_ecc[0] == calc_ecc[0] &&
read_ecc[1] == calc_ecc[1] &&
read_ecc[2] == calc_ecc[2])
return 0;
printf("s3c2410_nand_correct_data: not implemented\n");
return -1;
}
#endif
int board_nand_init(struct nand_chip *nand)
{
u_int32_t cfg;
u_int8_t tacls, twrph0, twrph1;
S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
DEBUGN("board_nand_init()\n");
clk_power->CLKCON |= (1 << 4);
/* initialize hardware */
twrph0 = 3; twrph1 = 0; tacls = 0;
cfg = S3C2410_NFCONF_EN;
cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
NFCONF = cfg;
/* initialize nand_chip data structure */
nand->IO_ADDR_R = nand->IO_ADDR_W = 0x4e00000c;
/* read_buf and write_buf are default */
/* read_byte and write_byte are default */
/* hwcontrol always must be implemented */
nand->hwcontrol = s3c2410_hwcontrol;
nand->dev_ready = s3c2410_dev_ready;
#ifdef CONFIG_S3C2410_NAND_HWECC
nand->enable_hwecc = s3c2410_nand_enable_hwecc;
nand->calculate_ecc = s3c2410_nand_calculate_ecc;
nand->correct_data = s3c2410_nand_correct_data;
nand->eccmode = NAND_ECC_HW3_512;
#else
nand->eccmode = NAND_ECC_SOFT;
#endif
#ifdef CONFIG_S3C2410_NAND_BBT
nand->options = NAND_USE_FLASH_BBT;
#else
nand->options = 0;
#endif
DEBUGN("end of nand_init\n");
return 0;
}
#else
#error "U-Boot legacy NAND support not available for S3C2410"
#endif
#endif