mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 14:10:43 +00:00
c05ed00afb
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
121 lines
3 KiB
C
121 lines
3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* pic32_mdio.c: PIC32 MDIO/MII driver, part of pic32_eth.c.
|
|
*
|
|
* Copyright 2015 Microchip Inc.
|
|
* Purna Chandra Mandal <purna.mandal@microchip.com>
|
|
*/
|
|
#include <common.h>
|
|
#include <phy.h>
|
|
#include <miiphy.h>
|
|
#include <errno.h>
|
|
#include <wait_bit.h>
|
|
#include <asm/io.h>
|
|
#include <linux/delay.h>
|
|
#include "pic32_eth.h"
|
|
|
|
static int pic32_mdio_write(struct mii_dev *bus,
|
|
int addr, int dev_addr,
|
|
int reg, u16 value)
|
|
{
|
|
u32 v;
|
|
struct pic32_mii_regs *mii_regs = bus->priv;
|
|
|
|
/* Wait for the previous operation to finish */
|
|
wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
|
|
false, CONFIG_SYS_HZ, true);
|
|
|
|
/* Put phyaddr and regaddr into MIIMADD */
|
|
v = (addr << MIIMADD_PHYADDR_SHIFT) | (reg & MIIMADD_REGADDR);
|
|
writel(v, &mii_regs->madr.raw);
|
|
|
|
/* Initiate a write command */
|
|
writel(value, &mii_regs->mwtd.raw);
|
|
|
|
/* Wait 30 clock cycles for busy flag to be set */
|
|
udelay(12);
|
|
|
|
/* Wait for write to complete */
|
|
wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
|
|
false, CONFIG_SYS_HZ, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pic32_mdio_read(struct mii_dev *bus, int addr, int devaddr, int reg)
|
|
{
|
|
u32 v;
|
|
struct pic32_mii_regs *mii_regs = bus->priv;
|
|
|
|
/* Wait for the previous operation to finish */
|
|
wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
|
|
false, CONFIG_SYS_HZ, true);
|
|
|
|
/* Put phyaddr and regaddr into MIIMADD */
|
|
v = (addr << MIIMADD_PHYADDR_SHIFT) | (reg & MIIMADD_REGADDR);
|
|
writel(v, &mii_regs->madr.raw);
|
|
|
|
/* Initiate a read command */
|
|
writel(MIIMCMD_READ, &mii_regs->mcmd.raw);
|
|
|
|
/* Wait 30 clock cycles for busy flag to be set */
|
|
udelay(12);
|
|
|
|
/* Wait for read to complete */
|
|
wait_for_bit_le32(&mii_regs->mind.raw,
|
|
MIIMIND_NOTVALID | MIIMIND_BUSY,
|
|
false, CONFIG_SYS_HZ, false);
|
|
|
|
/* Clear the command register */
|
|
writel(0, &mii_regs->mcmd.raw);
|
|
|
|
/* Grab the value read from the PHY */
|
|
v = readl(&mii_regs->mrdd.raw);
|
|
return v;
|
|
}
|
|
|
|
static int pic32_mdio_reset(struct mii_dev *bus)
|
|
{
|
|
struct pic32_mii_regs *mii_regs = bus->priv;
|
|
|
|
/* Reset MII (due to new addresses) */
|
|
writel(MIIMCFG_RSTMGMT, &mii_regs->mcfg.raw);
|
|
|
|
/* Wait for the operation to finish */
|
|
wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
|
|
false, CONFIG_SYS_HZ, true);
|
|
|
|
/* Clear reset bit */
|
|
writel(0, &mii_regs->mcfg);
|
|
|
|
/* Wait for the operation to finish */
|
|
wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
|
|
false, CONFIG_SYS_HZ, true);
|
|
|
|
/* Set the MII Management Clock (MDC) - no faster than 2.5 MHz */
|
|
writel(MIIMCFG_CLKSEL_DIV40, &mii_regs->mcfg.raw);
|
|
|
|
/* Wait for the operation to finish */
|
|
wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
|
|
false, CONFIG_SYS_HZ, true);
|
|
return 0;
|
|
}
|
|
|
|
int pic32_mdio_init(const char *name, ulong ioaddr)
|
|
{
|
|
struct mii_dev *bus;
|
|
|
|
bus = mdio_alloc();
|
|
if (!bus) {
|
|
printf("Failed to allocate PIC32-MDIO bus\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
bus->read = pic32_mdio_read;
|
|
bus->write = pic32_mdio_write;
|
|
bus->reset = pic32_mdio_reset;
|
|
strncpy(bus->name, name, sizeof(bus->name));
|
|
bus->priv = (void *)ioaddr;
|
|
|
|
return mdio_register(bus);
|
|
}
|